TELTONIKA FMC650 Leading GNSS-LTE-GSM-BLE Terminal Instructions
- June 5, 2024
- teltonika
Table of Contents
TELTONIKA FMC650 Leading GNSS-LTE-GSM-BLE Terminal
Product Information
Specifications
- Supported Devices: FMB640/FMC640/FMM640/FM6300
- Number of Pins: 12
- Pinout:
- Pin12: VDC
- Pin1: GND
- Pin6: CAN H
- Pin9: CAN L
- Pin10: Ignition
- Pin7: K-line
- Supported Protocols: FMS/K-Line
- Length: 0.9 meter
Product Usage Instructions
- Locate the FMS 12-pin connector on your heavy-duty vehicle.
- Connect the FMC650 device to the FMS cable using the corresponding pins according to the pinout provided.
- Ensure a secure connection for CAN H, CAN L, Ignition, and K-line pins.
- Power the device by connecting Pin12 (VDC) and Pin1 (GND) to the appropriate power sources.
- For Remote Data Download (RDD), ensure compatibility with supported vehicles listed in the manual.
- Contact the manufacturer for RDD support on vehicles not listed in the manual.
FAQ
Q: Can I use the FMC650 with any vehicle?
A: The FMC650 is compatible with specific vehicles listed in the manual for Remote Data Download (RDD). For other vehicles, please consult the manufacturer for compatibility.
Q: How do I know if RDD is available on my vehicle?
A: RDD signal availability can vary by vehicle make and model Refer to the manual or contact the vehicle manufacturer for information on RDD compatibility.
Main Page > Professional Trackers > FMC650 > FMC650 Manual > How to connect FMC650 with FMS Cable
Description
Cable is a standardized heavy duty vehicle FMS 12-pin connector, for
connecting FMX640 with one plug and receiving vehicle information through CAN
line and K-line, along with powering the device and getting Ignition
detection.
This ensures easier connection and does not violate the factory warranty.
Technical data
Technical data of the cable:
- Supported devices FMB640/FMC640/FMM640/FM6300
- Number of pins 12
- Pinout
- Pin12: VDC
- Pin1: GND
- Pin6: CAN H
- Pin9: CAN L
- Pin10: Ignition
- Pin7: K-line
- Supported protocols FMS/K-Line
- Length 0.9 meter
FMS Plug Location
- Even though the FMS cable is standardized cable – its placement in the vehicle might differ depending on the manufacturer and depending on vehicle trim level.
- We were able to identify the most common places for the FMS plug – refer to the examples below:
- Behind the Fuse panel on the passenger side – for Example SCANIA S/R/G/P Euro6 Series
- Near the Fuse panel on the passenger side – for example, DAF XF Euro6
- Behind the Radio on the lower deck – for example, Volvo FH Euro5 and Renault T Euro6
- Behind the Tachograph on the upper deck – for example, Mercedes Actros MP5 Euro6
Remote Data Download RDD via FMS
- When RDD (Remote Data Download) signal is available on FMS.
Applies to:
- DAF CF – LF – XF
- IVECO Stralis I / II/ Hi-Way
- Renault D / Magnum DXI & E-TECH / Midlum DXI / Premium DXI / Renault T-K-C
- Volvo FH – FM – FL
- For the following vehicles regarding the RDD, please contact the manufacturer:
- MAN TGX – TGA – TGL – TGM
- Mercedes Actros / Antos / Atego / Arocs / Axor II
- Scania R – P – G – S