XIAMEN D80 Thermal Printer User Manual
- June 7, 2024
- Xiamen
Table of Contents
- Product list
- Product introduction
- LED Status
- App download and connect
- Connect device
- Driver download
- Install the driver for Windows
- Install the driver for Mac
- Roll paper installation guide
- Foldable paper installation guide
- Charging instructions
- Warning
- Safety and precautions
- Cleaning print head
- Product specification
- FCC Warning
- Documents / Resources
XIAMEN D80 Thermal Printer User Manual
Product list
Product introduction
LED Status
App download and connect
Download
-
Search the App Store/Google Play for
” Luck Jingle ” download -
Scan the corresponding QR code to download
https://apps.apple.com/us/app/id
https://play.google.com/store/apps/details?id=com.dingdang.newprint&hl=nl&gl=US
Connect device
Please Long press the power button until the blue light flashes and enter the“ Luck Jingle ” App, turn on the BT of the mobile phone
Ios phone: please turn on the mobile phone BT
Android phone: please turn on the mobile phone BT and GPS
- Click the small printer icon in the upper right corner
- Click to search for BT
- Click to connect
- Successfully connected, a small green icon is displayed in the upper right corner
Note: Do not search for the printer connection in the Bluetooth settings of the mobile phone, but turn on the BT function and search for related devices in the APP and then connect it.
Driver download
Driver download Please download the printer driver ( Window or MAC ) on the official website at: http://www.luckjingle.com/driverDetail?id=5
Install the driver for Windows
Turn on the printer, The printer connects to the computer wia USB, Locate the downloaded
“ D80 Windows Driver ” file and open it.
1. Click the “ Install ” button and wait for installation
2. After the installation is successful, click “ Finish ” to exit the interface
Note: Before installing the driver, turn off your computer antivirus software.the printer needs to be connected to the power supply and computer, and the power on state.
Install the driver for Mac
Turn on the printer, The printer connects to the computer wia USB, Locate the
downloaded
“ D80 Mac Driver ” file and open it.
-
Click on “ open ” and continue to install the printer.
Follow the installation tip until you see “ The installation was successful ” -
Set the printer as the default mode.Please follow the steps in the picture tooperate:
1. Open the System Preferences, click on “ Printers & Scanners ”
2. Click here to add a printer, fax or scanner
3. Select YXWL D80 USB , click ” Add ” to add the printer
4. As shown in the figure, complete the printer setup
Roll paper installation guide
Foldable paper installation guide
Charging instructions
- It is recommended to use mobile phone charger to charge, 5V/2A input charge
- It is recommended to charge the first time after purchase
- Charge once every three months, otherwise it is easy to cause lithium battery, long time natural loss, and can not charge the phenomenon
Warning
- In a residential environment, running this device may cause radio interference
- The factory standard of this product does not include a power adapter. If you use a power adapter to charge, you should purchase one CE certified 5V/2A power adapter that meets the standards
- This is a professional product,please use the original battery.
- If you replace the original battery or use the wrong one Model batteries may explode.
Safety and precautions
- There is a built-in lithium battery, please do not use it in the environment with temperature higher than 40 ℃; keep away from fire and other heat sources, and do not place it in the hot sun, such as closed car;
- Children should be charged and used under the supervision of adults. After full charge, please make sure to pull out the charging line in time to prevent overheating, short circuit or fire;
- Do not put the product in fire or water to avoid battery short circuit or fire or burn;
- Working environment :0°C-40°C ambient temperature, relative humidity, 30%-85% RH Use in ( non-condensing ) environment, please do not exceed the recommended temperature range.
- If you suspect that there is a problem with the battery, please contact the after-sales service center for assistance.
Please do not touch the print head directly to avoid damage, especially after printing, do not touch the print head directly to prevent overheating and scalding.
Cleaning print head
- Please shut down the printer, open the paper cover and take out the paper roll
- Dip cotton cloth or cotton swabs into it. On the medical alcohol, along the printing head center to around the direction of gently wipe
- After cleaning the print head, do not use the printer immediately. Please wait 1′ 2 minutes until the alcohol has completely evaporated.
Product specification
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
https://apps.apple.com/us/app/id
https://play.google.com/store/apps/details?id=com.dingdang.newprint&hl=nl&gl=US
Made in China
Documents / Resources
|
XIAMEN D80 Thermal
Printer
[pdf] User Manual
D80 Thermal Printer, D80, Thermal Printer, Printer
---|---
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>