KERBL 299938 EcoKill LED Fly Killer Instruction Manual

June 3, 2024
KERBL

299938 EcoKill LED Fly Killer
Instructions for use

KERBL 299938 EcoKill LED Fly Killer

Operating and Safety Instructions for Electric Fly Killers EcoKill LED

General instructions

The present operating and safety instructions are for the user. Please read the instructions carefully and thoroughly and take heed of the regulations before putting the device into operation!

Safety instructions

2.1. Use
In the event of improper use of and tampering with the device, the warranty and liability of the manufacturer will be rendered null and void. The voltage given on the name plate must correspond to the voltage of the power source.
2.2. Check all components before each implementation
Damaged parts are only to be repaired by a specialist or by the manufacturer. Repairs done improperly can result in accidents for the operator. Use only original parts for any eventual repairs.
2.3. Safety
Before cleaning, rearranging, or servicing the device always first pull the plug from the power source!
2.4. Keep unauthorized persons away
Make sure that unauthorized persons, children, in particular, do not have access to the fly killer.
2.5. Fire hazard!
Do not operate the electric fly killer in barns or similar places and do not set the device up in the vicinity of combustible materials
and in places where the presence of combustible vapors, explosive dust or ignitable fluids is likely.
2.6. Guard the connection lines
Do not use the connection line to pull the plug from the power source or to carry the device. Take precautions that the connection lines are not exposed to heat, oil, or sharp edges. Damaged connection lines can cause fires, short- circuiting and electric shocks.
2.7. Take the ambient influences into account
Guard your device against all liquids and moisture. Never submerge in water or clean with a water jet. Otherwise, there will be a danger of fire or electric shock.
2.8. Regular servicing
Always store your device securely, out of reach of children, and dry. Heed all possible maintenance regulations. Check the device at regular intervals. Use only original spare parts and accessories.
2.9. National and international regulations
National and international safety, health, and labor regulations are to be heeded.

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience in a safe way and understand the hazards involved.
  • Children may not play with the device.
  • Cleaning and user maintenance may not be performed by children without supervision.
  • The instructions for appliances for indoor use only shall state that they are not suitable for use in barns, stables, and similar locations.
  • The appliance is to be kept out of reach of children.
  • The appliance is not to be used in locations where flammable vapor or explosive dust is likely to exist.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

Operating instructions

3.1. Function
By means of ultraviolet light, flying insects are lured into the effective range of the device. Attached in front of the light tube is a
screen charged with high voltage. Upon contact with this high-tension screen, the insects are quickly and hygienically killed. The
fallen insects are collected in a drip pan which only has to be removed from the housing for emptying.
3.2. Unpacking
Open the packing carefully and remove all the parts. Avoid scratching the device on sharp or pointed objects. Make sure that none of the parts, in particular the chain and the drip pan, is left in the packing. Keep the operating instructions in a safe place!
3.3. Assembly/erection
The device can be

  • put in place or
  • suspended on the chain which is included.

Relevant for both variants: Make sure the device is not placed too close to sources of ignition, i.e. easily combustible objects.
The device is not made for outdoor use!
3.3.1. The device is put in place

Make sure that the underground is even and dry and that no easily ignitable objects are in the immediate vicinity of the device. The site of installation should likewise be beyond the reach of children. For smooth functioning, it is important that the device is set up so that insects can fly unimpeded toward the light from both sides. Other sources of light and drafts have a negative effect on the effectiveness of UV light.
3.3.2. The device is suspended
Choose the site with care. Other sources of light and drafts have a negative effect on the effectiveness of UV light. Make sure that the chains are firmly attached to the device. Install the insect killer between 1.5 and 3.0 m above the ground. Caution: Do not hang outdoors! The device is for indoor use only!
3.4. Servicing/Cleaning
Switch the device off and pull the power plug before cleaning. Empty the drip tray regularly – at least once a week. When doing this, pull it carefully out of the housing. The pan can then be rinsed with water. Let it dry before reinserting. The protective screen, the high-voltage screen, and the UV lamps can be cleaned with a dry cloth or with a brush.

Specification

Mains voltage:
Frequency:
Power:
High voltage:
Effective range:| 220 – 240 Volt
50 Hz
14 Watt
2.200 Volt
max. 150 m2
---|---

Electrical waste
It is up to the operator to dispose of the device responsibly after its useful life in accordance with local regulations. Consult the relevant regulations for your country. The device must not be disposed of in the household waste. Under the terms of the EU Directive on the disposal of old electrical and electronic equipment, the device can be taken to local authority-run refuse sites or recycling plants free of charge, or returned to dealers who offer a returns service. Correct disposal protects the environment and prevents any possible harmful impacts on humans and the environment.

Albert Kerbl GmbH
Felizenzell 9
84428 Buchbach, Germany
Tel. +49 8086 933 – 100
Fax +49 8086 933 – 500
info@kerbl.de
www.kerbl.de| Kerbl Austria Handels GmbH
Wirtschaftspark 1
9130 Poggersdorf
Tel. +43 4224 81555
Fax. +43 4224 81555-629
order@kerbl-austria.at
www.kerbl-austria.at| Kerbl France Sarl
3 rue Henri Rouby, B.P 46 Soultz
68501 Guebwiller Cedex, France
Tel. : +33 3 89 62 15 00
Fax : +33 3 89 83 04 46
info@kerbl-france.com
www.kerbl-france.com
---|---|---

299938=BA_EcoKill_148x210_0921

Documents / Resources

| KERBL 299938 EcoKill LED Fly Killer [pdf] Instruction Manual
299938 EcoKill LED Fly Killer, 299938, EcoKill LED Fly Killer, LED Fly Killer, Fly Killer, Killer
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals