Kmart 1800 Bubble Up Elephant Bath Toy User Manual
- June 17, 2024
- Kmart
Table of Contents
Kmart 1800 Bubble Up Elephant Bath Toy
Product Information
Specifications:
- Customer Name: Kmart
- Brand Name: Nursery Country
- Item No: 1800
- Date: 24May23
- Manual Size: W14.8 x H21 cm
- Box Type: Manual
- Colour: K
- Version: 2023
- Pantone: Designer: Jackson
Product Usage Instructions
Battery Installation:
CAUTION:
BATTERY INSTALLATION BY AN ADULT REQUIRED. Use LR6 size ‘AA’ 1.5V x 2
batteries.
- Clean and dry the mounting surface (glass/tile).
- Press the suction cups firmly in place.
- Insert 2 x 1.5V AA batteries (not included) into the battery compartment.
- Tighten the compartment with a screwdriver (not included).
Bubble Solution Preparation:
- Mix 1 part liquid soap and 4 parts water in a container.
- Pour the bubble solution into the toy bathtub until it reaches the middle of the ‘MAX’ and ‘MIN’ mark.
Operating the Toy:
- Place the elephant in the toy bathtub.
- Press the button on its forehead to start the bubble stream.
- To stop the bubbles, press the button again.
Tip:
Ensure the solution level is above ‘MIN’ and below ‘MAX’ to ensure proper
bubble generation without overflow.
After Use:
ADULT ASSEMBLY AND SUPERVISION REQUIRED. Drain out any excess water after use
and allow it to dry. Keep the packaging for future reference.
FAQs
-
Q: How do I clean the toy?
A: Wipe the toy with a damp cloth and mild soap. Do not submerge in water. -
Q: Can I use other types of batteries?
A: Use only LR6 size ‘AA’ 1.5V batteries for the toy.
Specification
Installation And Using Instruction
-
Clean and dry the mounting surface (glass/tile) and press the suction cups firmly in place.
-
Mix 1 part liquid soap and 4 parts water in a container and pour the bubble solution into the toy bathtub until it reaches the middle of the ‘MAX’ and ‘MIN’ mark.
-
Tip: The solution should be at least over the ‘MIN’ (or no bubbles can be blown) and below the ‘MAX’ (or the water will overflow when putting the elephant back in the toy bathtub).
-
CAUTION: BATTERY INSTALLATION BY AN ADULT REQUIRED.
Insert 2 x 1.5V AA batteries (not included) into the battery compartment and tighten it with a screwdriver (not included). -
Place the elephant in the toy bathtub and press the button on its forehead. The fun starts as the bubbles stream from the front of the elephant and float away!
-
You can stop the bubbles by pressing the same button once again.
- ADULT ASSEMBLY AND SUPERVISION REQUIRED.
- AFTER USE, DRAIN OUT ANY EXCESS WATER AND ALLOW TO DRY.
- PLEASE KEEP THE PACKAGING FOR FUTURE REFERENCE.
MADE IN CHINA
Keycode: 43-314-584
FOR AU/NZ:
IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>