IXTECH IX-E01 Outdoor Bluetooth Speakers User Manual

IXTECH IX-E01 Outdoor Bluetooth Speakers

Product Information

Specifications:

• Type: Horn Speaker
• FCC Compliance: Part 15 of FCC Rules
• IC Compliance: Industry Canada’s license-exempt RSSs
• RF Exposure Requirement: General exposure requirement met
• Usage: Portable exposure condition without restriction

Product Usage Instructions

1. FCC Warning:

This device complies with Part 15 of the FCC Rules. It must not cause harmful interference and should accept any interference received.

Note: Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

2. IC Warning:

This device complies with Industry Canada’s license-exempt RSSs. It should not cause interference and must accept any interference received. The device meets general RF exposure requirements and can be used in portable exposure conditions without restrictions.

FAQs

Q: Can the horn speaker be used outdoors?

A: Yes, the horn speaker can be used outdoors in portable exposure conditions.

Q: How can I ensure the device does not cause interference?

A: To prevent interference, ensure that the device is operated according to the provided instructions and avoid making unauthorized modifications.

INTRODUCTION

Thank you for purchasing Flame Light Speaker. This upgraded Bluetooth speaker can be used as a portable speaker and atmosphere lamp that allows you to enjoy music wirelessly in a campfire atmosphere and relax your mood. Fantastic for placing at your room, patio, yard, garden, party and camping

TECHNICAL PARAMETERS

USING YOUR SPEAKER

1. Flame Light:
   • Press the button to tum the light on or off.
   • Short press to adjust the mode of the light: Flickering / Candle / Always On
2. Play Music/Answer a Call:
   • Short press the button to play a track or to answer an incoming call. Press again to pause a track or end a call. Press and hold the button to reject an incoming call.
3. Button
   • Press the button once to turn the volume up.
   • Press and hold to go to the next track in your playlist
4. Button ,
   • Press the button once to turn the volume down. Press and hold to go to the previous track in your playlist.
5. Bluetooth:
   • Press and hold the button to disconnect/ reconnect Bluetooth Double-press (f, to enable the multi-sync mode to wirelessly connect multiple speakers. For detailed operations, please refer to the “SYNCHRONIZING YOUR SPEAKERS” section.

BLUETOOTH PAIRING

1. Press and hold the Button for 3-4 seconds to power on your speaker.
2. All buttons emit blue light and flash rapidly to indicate that it’s searching for Bluetooth devices.
3. Go to the Bluetooth settings menu on your phone or other devices. Make sure that Bluetooth is turned on. Connect to the device listed as “IX-E01 “
4. The blue LED light on buttons flashes about every 2 seconds to indicate that your speaker is paired with your device.

FCC  Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

SYNCHRONIZING YOUR SPEAKERS

You can get true wireless stereo sound or play music in synec by connecting more Flame Light Speakers as follows:

IMPORTANT:

1. Before synchronizing your speakers, please unpair (remove/ forget) all previously paired “IX-E01” Bluetooth speakers on your Bluetooth device.
2. Create IX-E01 primary and secondary speakers. In the multi-sync mode, the first connected Bluetooth speaker will be the primary speaker

step 1

• Long press the button of Speaker A to turn it on and get it paired with your Bluetooth device. And label this Speaker A as the Primary speaker.

step 2

•  Double-press (press twice in one second) the button until you hear a prompt tone “multl:·sync mode” to enter the multi-sync mode.

step 3

•  Turn on your Speaker B, double-press the ({ ) button, and the Speaker B will emit a prompt tone “multi-sync mode” and enter the multi-sync mode.

step 4

• Wait for secnds until the Speaker B emits a prompt tone “synced”, the Speaker A and Speaker B are synchronized.

step 5

To connect 3 or more Flame Light Speakers together, please first power on and then doublepress the Bluetooth button, repeat these steps on desired speakers one by one. Wait patiently for 5-10 seconds, all speakers will be synchronized.

If you want the speakers to keep the sync settings so you don’t have to repeat the synchronization processes the next time, you can do it in two ED

• Put all speakers into Standby mode:

1. Short press the power button of the primary unit, and you will hear the prompt sound “stand by”. At this time, both the primary unit and the secondary units will enter the standby mode, and their button indicator lights will turn off. »
2. Short press the power button of the primary unit again. When you hear the prompt sound “awake”, you can re-enter the multi-sync mode and their button indicator lights will turn blue.

Note: The speakers will consume a small amount of power in Standby mode.

• Put all speakers into Memory mode: » 1. Press and hold the power button of the primary unit, and the primary unit and the secondary units will turn off at the same time. » 2. Turn on the primary unit and the secondary units one by one. At this time, only one Bluetooth name of the speakers will display on your Bluetooth device. After the successful Bluetooth pairing, wait for a few seconds, and the speakers will re-enter the multi-sync mode.

NOTE

• When multiple speakers are successfully synchronized, only the blue light on the panel of the primary speaker will flash, the indicator lights of other speakers will remain on.
• To adjust volume or use other control buttons, please use either your mobile phone or the primary speaker. When you power off the primary speaker, all connected speakers will power off.
• If you want to switch the primary speaker, you will need to long press the Bluetooth button to disconnect the Bluetooth or delete all the paired Bluetooth speakers on the mobile phone and repair your new primary speaker.
• It is not recommended to switch the primary speaker.
• When watching a video, the sound in videos may be out of sync with the picture if you connect to the speaker via Bluetooth. In this case, it is recommended to use the included AUX audio cable to get the best experience

CHARGING YOUR SPEAKER

When charging, the LED indicators will flash red. When fully charged, the LED indicators will go out

MAINTENANCE & CARE

• Before using your speaker, inspect the ports to make sure that they are clear of dust and debris before charging.
• Use a soft cloth to clean your speaker. Never use any harsh chemicals or detergents. Make sure your speaker is dry before charging.
• This speaker can stand up to splashes and spills. For the bestperformance, avoid exposing it to water or harsh weather conditions. » The stakes should not be exposed to direct sunlight for lengthy periods of time as this may cause them to bend. » When your speaker is not in use, it should be stored in a cool, dry place.
• Do not tug or yank on the USB charging cable while it is connected to your speaker. Connect and disconnect cables as carefully as possible.
• Do not expose your speaker to high temperatures, or extreme cold.
• Please recycle or dispose of your speaker properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information

ONE YEAR WARRANTY

1. Our products are covered by a 12-month limited warranty, starting from the date of purchase. This warranty is not transferable and applies only to the original consumer purchaser.
   For quality-related issues, we will, at its sole option, repair or replace any products that malfunction due to defective parts or workmanship at no charge to you.

Not Covered Under Warranty: » Damage from outside sources

• Damage from misuse of products(including,but not limited to: falls, extreme temperatures, water, operating devices improperly, incorrect connections, incorrect battery use)

• Damaga caused by accident, improper care, negligence, excessive wear and tear, or improper installation or assembly contrary to any written installation instruction Items that have expired their warranty period Non-quality-related issues(after 30 days of purchase)  Repairs through 3rd parties

• [email protected]

•  www.i-xtech.com

IC Warning

“This device complies with Industry Canada’s license-exempt RSSs.

Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>