TESLA Speed 9S Smart Camera 360 Baby User Manual

: June 4, 2024
: Tesla

Table of Contents

WHAT‘S IN THE BOX
INSTALL
CONNECT
SET UP ROUTER
REGISTRATION PROCESS
QR CODE CONFIGURATION
FAQ
FUNCTIONS
TECHNICAL SPECIFICATION
INFORMATION ABOUT DISPOSAL AND RECYCLING
EU DECLARATION OF CONFORMITY
Documents / Resources

Speed 9S SMART
CAMERA 360 BABY
USER MANUAL

WHAT‘S IN THE BOX

Please consult this checklist for all parts.

Smart Camera 360 Baby
Power adapter
USB cable
Bracket
Screws
Pin
User manual

Power	DC 5V ±10%
Status light	Red light solids on: the camera or network is abnormal

Blinking red light: awaiting WiFi connection (faster blinking)
Blue light solids on: camera running correctly
Blinking blue light: currently connecting (faster blinking)
Microphone| Captures sound for your video
SD card slot| Supports local SD Card storage (Max.128G)
Reset| Press and hold for 5 seconds to reset the camera (if you have
Call| Receive the answer after pressing the button

INSTALL

Use the included mounting bracket to fix the camera to a clean surface.
Or, put the camera on a flat surface.

CONNECT

Download
Tesla Smart is available for both iOS and Android OS. Search the name ‚Tesla Smart‘ in App Store or Android Market, or scan the QR-Code to download the App.
TESLA Speed 9S Smart Camera 360 Baby - qr code http://tsl.sh/app

SET UP ROUTER

The router supports the 2.4GHz WiFi (doesn‘t support the 5GHz). Before connecting to the WiFi network, please set the parameters of the router, and record the SSID and password of your WiFi. Keep the network available.

REGISTRATION PROCESS

Step 1 Open the Tesla Smart App, click „Register“, read the „Privacy Policy“ and click „Agree“.
Step 2 Input a legal and valid Mobile number or Email address and click „Continue“. Input the Verification Code, then log in to the app.

QR CODE CONFIGURATION

Open the Tesla Smart App, click „Create a family“, and you can customize the Family name and related settings.
Continue to click „Security & Sensor“ >> „Smart Camera“, and then choose“ Add Device“ or „+“, ready to add a camera.
In „Add Device“ this interface, continue to click „next step“, and then you should input your WiFi passwords. Note:
1) Camera only supports a 2.4GHz WiFi network.
2) The number of bits in the SSID and passwords of the router should not exceed 24 digits.
In this interface, you should scan the QR code in your phone with the camera, when the camera comes out „dong dong dong“. And you can complete the configuration in about 30s.
When connecting, you should make sure your router, mobile,and camera are as close as possible. When the camera is added successfully, click „ „ you could also DIY the camera‘s name.

SETTINGS
In the „Smart Camera“ interface, click „ „, and you can set the camera’s common functions.

FAQ

Q: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still on the list of devices after reseting?
A: The reset device only resets the network configuration of the camera, but cannot change the configuration on the App, remove the camera, and must be deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device again by the App.
Q: Why doesn‘t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether the SD card is normally available and the format is FAT32. And the TF card can’t be identified when the internet environment is not good.
Q: Why I can’t get the notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant reminder function has been opened; Message notification and authority confirmation in the mobile phone system has been opened.

FUNCTIONS

Pan/Tilt
Rotate your camera by sliding on your smartphone, providing you with 360 degrees of vision.
Video flip
Flip your video stream up or down for maximum flexibility.
Motion detection
Built-in motion sensors detect movement, and the camera will send you to push notifications and app alerts.
Record
Support 24H continuous recording with high capacity SD storage or Cloud storage.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision technology.
One-Touch Call
Hear your baby‘s call anytime, anywhere.

TECHNICAL SPECIFICATION

Product name	Tesla Smart Camera 360 Baby
Resolution	1920 x 1080
Power supply	DC5V, 1A
Sensor	1/3‘‘ 2MPx, CMOS
IR Distance	Up To 10 m
Lens	3.6mm, F2.0
Dimensions	84 x 86 x 160 mm
Storage	MicroSD Card, Cloud
App	Tesla Smart for Android and iOS
Connectivity	Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Model	Speed 9S

INFORMATION ABOUT DISPOSAL AND RECYCLING

This product is marked with the symbol for a separate collection. The product must be disposed of in accordance with the regulations for disposal of electrical and electronic equipment (Directive 2012/19/ EU on waste electrical and electronic equipment). Disposal together with regular municipal waste is prohibited. Dispose of all electrical and
electronic products in accordance with all local and European regulations at the designated collection points which hold the appropriate authorization and certification in line with the local and legislative regulations. Correct disposal and recycling help to minimize impacts on the environment and human health. Further information regarding disposal can be obtained from the vendor, authorized service center, or local authorities.

EU DECLARATION OF CONFORMITY

Hereby, Witty Trade s.r.o. declares that the radio equipment type Speed 9 is in compliance with EU directives. The full text of the EU declaration of conformity is available at the following internet address:
teslasmart.com/declaration

Connectivity: Wi-Fi 2,4 GHz IEEE 802.11b/g/n
Frequency band: 2.400 – 2.4835 GHz
Max. radio-frequency power (EIRP): < 20 dBm

Manufacturer
Tesla Global Limited
Gee Chang Industrial Building,
121 Des Voeux Road Central
Hong Kong
www.teslasmart.com