Keychron Q2 Non-Knob Version Keyboard User Manual

Keychron Q2 Non-Knob Version Keyboard User Manual

Fully Assembled Version

Keyboard

• 1x Fully Assembled Keyboard

Including

• 1x Aluminum Case
• 1x PCB
• 1x Steel Plate
• 1x Sound Absorbing Foam
• 1x Case Foam
• 12x Gaskets (8 Installed and 4 in the Box)
• 4 Sets x Stabilizers
• 1 Set x Keycaps (PBT Double-shot)
• 1 Set x Switches (Gateron G Pro)

Cable

• 1x Type-C to Type-C Cable
• 1x Type-A to Type-C Adapter

Tools

• 1x Switch Puller
• 1x Keycap Puller
• 1x Screwdriver
• 1x Hex Key

Barebone Version

Keyboard Kit

• 1x Keyboard Kit (Without Keycaps & Switches)

Including

• 1x Aluminum Case
• 1x PCB
• 1x Steel Plate
• 1x Sound Absorbing Foam
• 1x Case Foam
• 12x Gaskets (8 Installed and 4 in the Box)
• 4 Sets x Stabilizers

Cable

• 1x Type-C to Type-C Cable
• 1x Type-A to Type-C Adapter

Tools

• 1x Switch Puller
• 1x Keycap Puller
• 1x Screwdriver
• 1x Hex Key

QUICK START GUIDE

If you are a Windows user, please find the appropriate keycaps in the box, then follow the instructions below to find and replace the following keycaps.

1. Switch To The Right System

Please make sure the system toggle on the top left corner has been switched to the same system as your computer’s operating system.

2. The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

3. The Layers

There are five layers of key settings on the keyboard.
The layer O is for the Mac system.
The layer 1 is for the Windows system.
The layer 2 is for the Mac Multimedia keys.
The layer 3 is for the Windows Multimedia keys.
The layer 4 is for the Function keys.

If your system toggle is switched to Mac, then the layer O will be activated.

If your system toggle is switched to Windows, then the layer 1 will be activated.

4. Multimedia Key and Function Key

5. The Backlight

6. Adjust The Backlight Brightness

7. Adjust The Backlight Speed

8. Warranty

The keyboard is highly customizable and easy to be rebuilt.
If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

9. Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

10. Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?
1. Try factory reset by pressing fn1 + J +Z (for 4 seconds)
2. Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard.
3. Remove the space bar keycap to find the rest button on the PCB.
4. Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
5.  Flash the firmware with the QMK Toolbox.
6. Factory reset the keyboard again by pressing fn1 + J + Z (for 4 seconds)

• Step by step guide can be found on our website

Q2 CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Specifications

Layout| 65%
Switch type| Mechanical
Width| 121mm
length| 327.5 mm
Front height| 20 mm (without keycaps)
Back height| 33.8 mm (without keycaps)
Front height| 33.6 mm (with OEM keycaps installed)
Back height| 45.6 mm (with OEM keycaps installed)
Keyboard feet height| 2.4mm
Angle| 6.5 degree

Q2 MECHANICAL KEYBOARD OVERVIEW

DEFAULT KEY LAYOUT:

LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac.

LAYER 1: This layer will be activated when your keyboard’s system toggle is switched to Windows.

LAlt = Left Alt LWin = Left Windows RAlt = Right Alt

LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn1/M0(2) key.

LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn1/M0(3) key.

LAYER 4: This layer will be activated when you press the fn2/M0(4) key.

KEY DESCRIPTION

when holding this key
Mute| Mute| M0(2)| Layer 2 will be activated
when holding this key
Vol-| Volume Decrease| M0(3)| Layer 3 will be activated
when holding this key
Vol+| Volume Increase| M0(4)| Layer 4 will be activated
when holding this key
RGBToggle| Tum Backlight on/off|

Keychron Q2 Keycap Size

Below is the hi res image of Q2 keycap size.

Q2 Keyboard Plate File

Q2 ANSI/ISO Layout Plate Download

Q2 ANSI Layout Plate dwg Format File Download

Q2 ISO Layout Plate dwg Format File Download

Q2 ANSI Layout Plate

Q2 ISO Layout Plate

How to Factory Reset or Flash Firmware for Your Keychron Q2 keyboard?

Troubleshooting? Or don’t know what’s going on with the keyboard? You may try factory reset.

Note: If everything works fine with your keyboard. Please don’t flash the firmware. There is a chance it can damage your keyboard.

1. Download the Q2 firmware (the file needs to be unzipped) and download the QMK Toolbox. (If the download link below does not work, use this link: https://github.com/qmk/qmk_toolbox/releases)

Download Q2 Non-Knob ANSI Firmware

Download Q2 Non-Knob ISO Firmware

Download Q2 Knob Version ANSI Firmware

Download Q2 Knob Version ISO Firmware

Download QMK Toolbox for Mac

Download QMK Toolbox for Windows

2. Unplug the power cable from the keyboard.

3. Open the QMK Toolbox.

4. Remove the space bar keycap to find the reset button on the left side of the space bar switch on the PCB.

5. Press down and hold the reset button.

6. Plug in the power cable. The keyboard will enter into DFU mode. Then, the QMK Toolbox will display in yellow words “***DFU device connected”.

6. Click open and choose the Keychron Q2 firmware. Click the Flash button. It will start flashing. (Note: Do NOT unplug the power cable while it’s flashing.)

7. Wait a few seconds and when you see the content below, it means the keyboard has flashed successfully factory reset.

If VIA can’t pair with your Keychron Q2 after you tried flashing, you need to follow these steps:

1. Reconnect your keyboard power cable.

2. If VIA still doesn’t pair together after you reconnect the power cable, download the Keychron Q2 keymap JSON file.

Download Q2 Knob version ANSI /US keymap JSON for VIA

Download Q2 Non-Knob version ANSI /US keymap JSON for VIA

Download Q2 Knob version ISO keymap JSON file for VIA

Download Q2 Non-Knob version ISO keymap JSON for VIA

3. Open VIA.

Step 1: Click the “DESIGN” section.
Step 2: Drag the JSON file to the tab and then click the “CONFIGURE” section to customize the keymap.

5.  VIA should pair together with the Keychron Q2 now.

You may contact support@keychron.com if a defect covered by the warranty arises in your product within the warranty period. Keychron will honor the warranty of our Q and V series keyboard (e.g.: Q1, Q2, V1, V2, etc.) by one of the following methods at our discretion:

– Defects of Q and V series keyboards have been caused by manufacturing: We will only replace the defective parts of the keyboard, not the whole keyboard, as its highly customizable and easy to be rebuilt.

– Defects of Q and V series keyboards have been caused by disassembling our product, improper installation, non-factory repairs/modifications, improper adjustment of the product, or neglect, including but not limited to “burn-in”, and similar wrongful use: We will NOT offer free service. We only offer paid service to replace the defective parts at your own cost (including the cost of parts, shipping fee and tax if applicable).

The Key Combinations Table Of Keychron  Q2

For Keychron Q2, we’ve included all the normal and useful functions keys that can be accessed via the default key combinations. Here is the table for all the key combinations and functions it can access.

fn1 + Keys

fn2 + Keys

*Above are the default key combinations of Keychron Q2. You can customise your own key combinations on each  layer  and access to more functions through VIA software. Please click here and read “How to Use Different Layers to Set the Combination Keys” for details.

Read More About….

Keychron Q2 Non-Knob Version Keyboard User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>