Keychron Q3 Knob Version Customizable Keyboard User Manual

June 4, 2024
Keychron

Keychron Q3 Knob Version Customizable Keyboard

User Manual

Fully Assembled Version

Fully Assembled Version

Keyboard

  • 1x Fully Assembled Keyboard

Including

  • 1x Aluminum Case
  • 1xPCB
  • 1x Steel Plate
  • 1x Sound Absorbing Foam
  • 1xCase Foam
  • 16x Gaskets (10 Installed and 6 in the Box)
  • 5 Sets x Stabilizers
  • 1 Set x Keycaps (PBT Double-shot)
  • 1 Set x Switches (Gateron G Pro)

Cable

  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter

Tools

  • 1x Switch Puller
  • 1x Keycap Puller
  • 1x Screwdriver
  • 1xHex Key

Barebone Version

Barebone Version

Keyboard Kit

  • 1x Keyboard Kit (Without Keycaps & Switches)

Including

  • 1xAluminum Case
  • 1xPCB
  • 1x Steel Plate
  • 1x Sound Absorbing Foam
  • 1xCase Foam
  • 16x Gaskets (10 Installed and 6 in the Box)
  • 5 Sets x Stabilizers

Cable

  • 1x Type-C to Type-C Cable
  • 1x Type-A to Type-C Adapter

Tools

  • 1x Switch Puller

  • 1x Keycap Puller

  • 1x Screwdriver

  • 1xHex Key

QUICK START GUIDE

If you are a Windows user, please find the appropriate keycaps In the box, then follow the Instructions below to find and replace the following keycaps.

Mac / Windows

1. Switch To The Right System

Please make sure the system toggle on the top left corner has been switched to the same system as your computer1s operating system.

Switch

2. The VIA Key Remapping Software

Please visit caniusevia.com to download the latest VIA software to remap the keys.
If the VIA software cannot recognize your keyboard, please reach out to our support to get the instruction.

3. The Layers

There are four layers of key settings on the keyboard. The layer O and layer 1 are for the Mac system. The layer 2 and layer 3 are for the Windows system.

If your system toggle is switched to Mac, then the layer O will be activated.

If your system toggle is switched to Windows, then the layer 2 will be activated. Remember that if you are using it in Windows mode, please make changes to the layer 2 instead of the top layer ( the layer O ).

This is a common mistake people are making.

4. The Backlight

Backlight

5. Adjust The Backlight Brightness

Backlight Brightness

6. Adjust The Backlight Speed

6 Adjust The Backlight Speed

7. Activate Siri / Cortana

For Siri on Mac: Go to System preferences> Siri > Select • Hold Command Space” option.
Siri key only works on macOS and does not work on iOS.

For Cortana on Windows: Select Start > Settings > Cortana and select the shortcut by pressing Windows key + C key.
‘Windows Cortana Is only available for Windows 10 and above OS. Cortina Is only available in certain countries/regions and might not work every where.

8. Warranty

The keyboard is highly customizable and easy to be rebuilt If anything goes wrong with any of the keyboard components of keyboard during the warranty period, we will only replace the defective parts of the keyboard, not the whole keyboard.

9. Watch The Building Tutorial On Our Website

If you are building the keyboard for the first time, we highly recommend you watch the building tutorial video on our website first, then start building the keyboard yourself.

10. Factory Reset

Factory Reset

Troubleshooting? Don’t know what’s going on with the keyboard?
1. Try factory reset by pressing fn + J +Z (for 4 seconds)
2. Download the right firmware for your keyboard from our website.
Remove the power cable from the keyboard.
3. Remove the space bar keycap to find the reset button on the PCB.
4. Hold the reset key while plugging in the power cable and then release the reset key. The keyboard now will enter DFU mode.
5. Flash the firmware with the QMK Toolbox.
6. Factory reset the keyboard again by pressing fn + J + Z (for 4 seconds)

  • Step by step guide can be found on our website

Q3 CUSTOMIZABLE KEYBOARD SPECIFICATIONS

Specifications

Layout| TKL
Switch type| Mechanical
Width| 137mm
Length| 365mm
Front height| 20 mm (without keycaps)
Back height| 32 mm (without keycaps)
Front height| 30.7 mm (with OSA keycaps installed)
Back height| 42 mm (with OSA keycaps installed)
Keyboard feet height| 2.7mm
Angle| 5.2 degree

Q3 MECHANICAL KEYBOARD OVERVIEW

OVERVIEW

DEFAULT KEY LAYOUT:

LAYER 0: This layer will be activated when your keyboard’s system toggle is switched to Mac.

LAYER 0

LAYER 1 : This layer will be activated when your keyboard’s system toggle is switched to Mac and press the fn/M0(1) key.

LAYER 1

LAYER 2: This layer will be activated when your keyboard’s system toggle is switched to Windows.

LAYER 2

LWin = Left Windows LAlt = Left Alt RAlt = Right Alt RWin=Right Windows

LAYER 3: This layer will be activated when your keyboard’s system toggle is switched to Windows and press the fn/M0(3) key .

LAYER 3

KEY DESCRIPTION

Key Description

Ser-| Screen Brightness Decrease
Ser+| Screen Brightness Increase
Bright-| Backlight Decrease
Bright+| Backllght Increase
Prvs| Previous
Play| Play/Pause
Next| Next
Mute| Mute
Vol-| Volume Decrease
Vol+| Volume Increase
RGBToggle|  Turn Backlight on/off
RGBMd+| RGB Mode Next
RGBMd-| RGB Mode Previous
Hue+| Hue Increase
Hue-| Hue Decrease
RGBSPI| RGB Speed Increase
RGBSPD| RGB Speed Decrease
M0(1)| Layer 1 will be activated when holding this key
M0(2)| Layer 2 will be activated when holding this key
M0(3)| I.ayer 3 will be activated when holding this key
M0(4)| Layer 4 will be activated when holding this key

Third party input tools are not compatible with the keyboard.
Due to compatibility, versions, brands and drivers of Windows/macOS, functionalities of third Party input tools may be affected while using the keyboard. Please make sure your operating system and drivers are up to date.

Certain fn keys or multimedia keys does not work under Windows/ Android mode.
Functionalities of certain multimedia keys may be disabled due to compatibility, versions, brands and drivers of Windows/Android OS.

Safety Precaution:
Keep the product, accessories and packaging parts out of reach of children to prevent any accidents and choking hazards.
Always keep the product dry to avoid corrosion.
Do not expose the product to extreme temperatures below -10°C (5°F) or above 50°C (131 °F) to preserve the lifespan of the keyboard.

Keychron, Inc.
Dover, DE 19901, United States
Find us at:
https://www.keychron.com
Support@keychron.com
Facebook @keychron
Instagram @keychron
Twitter @keychronMK
Designed by Keychron
Made in China


Read More About….

Keychron Q3 Knob Version Customizable Keyboard

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals