HS-612 Hair Crimper Ardesto User Manual

: June 5, 2024
: ARDESTO

Table of Contents

HS-612 Hair Crimper Ardesto
Product Information
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
HOW TO USE
CLEANING AND MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HS-612 Hair Crimper Ardesto

Product Information

Specifications:

Model : HS-612
Power: 60W
Temperature Range : Adjustable
Features: Heating plate, power indicator

Product Usage Instructions

Safety Instructions:

Do not operate if the cable or plug is damaged.
If a malfunction occurs, switch off, unplug, and seek professional advice.
Avoid sources of heat and sharp objects.
Always switch OFF before connecting to the power supply.
Avoid contact with hot surfaces.
Do not use near water or cover when hot.
Keep away from non-heat-resistance surfaces.
Ensure hands are dry before operation.
Do not operate near water sources.
Never leave it unattended when connected to the power supply.
Regularly check the mains cord for wear and damage.

Operating Instructions:

Ensure the appliance is on a stable, flat surface.
Plug into a suitable power outlet.
Adjust the temperature as needed.
Wait for the indicator light to show the desired temperature is reached.
Style your hair as desired, avoiding direct contact with the heating plate.

Cleaning and Maintenance:

Allow the appliance to cool down before cleaning.
Use a damp cloth to clean the surface.
Avoid using harsh chemicals or abrasive materials.
Store in a cool, dry place when not in use.

FAQ

Q: Can children use this hair styler?
- A: This appliance can be used by children aged 8 years and above under supervision.
Q: What should I do if the appliance falls into the water?
- A: Switch off the power immediately, unplug, and have it inspected by a qualified electrician before reuse.
Q: How do I know when the appliance is ready to use?
- A: Wait for the indicator light to signal that the desired temperature has been reached before styling your hair.

IMPORTANT SAFETY INSTRUCTIONS

The following safety precautions should always be followed, to reduce the risk of electric shock, personal injury or fire. It is important to read all of these instructions carefully before using the product and to save them for future reference or new users.

Do not operate this appliance if the cable or plug becomes damaged. A qualified electrician must always carry out any repairs that are necessary.
If the appliance stops unexpectedly or appears to malfunction, switch off the power supply, unplug from the mains, and stop using it immediately. Seek professional advice to rectify the fault or make repairs.
Keep the appliance and cable away from sources of heat, sharp objects or anything that may cause damage.
Ensure the appliance is switched OFF before connecting to the mains power supply.
Be aware that some surfaces may become hot. Do not touch and supervise others accordingly. The unit is VERY HOT when in use. Take care to avoid contact between the hot surface of the heating plate and bare skin, particularly around the ears, face and neck when in use.
Care should be taken not to touch this part of the appliance when it is switched on or just after it has been turned off. ALLOW AT LEAST 30 MINUTES TO COOL DOWN BEFORE PUTTING AWAY
Electrical appliances must always be stored in a secure place, out of reach of children.
Children should be supervised to ensure that they do not play with the appliance.
Close supervision is necessary when the appliance is being used near children.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
To protect against electric shock, never allow the appliance, the mains cable or plug to come into contact with water or any other liquid.
Never reach for any appliance that has fallen into the water. Switch off the power supply at the mains immediately and unplug. Do not re-use until the product has been inspected and approved by a qualified electrician.
Keep the appliance away from non-heat-resistance surfaces and never cover the appliance with anything (e.g. clothing or towels) when it is hot.
Always ensure that hands are dry before operating or adjusting any switch on the product or touching the plug and main supply connections.
Keep the appliance away from water. Do not use it near or over water contained in baths, washbasins, showers etc.
Never leave the appliance unattended when connected to the main power supply. To disconnect, first ensure that all controls are in the OFF position, then remove the plug from the electricity supply.
Never wrap the mains cord around the appliance. Do not hang up by the power cord.
Regularly check the mains cord for wear and damage, particularly where it enters the product and the plug.
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a dage way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.

WARNING! DO NOT USE THIS APPLIANCE NEAR BATHTUBS, SHOWERS, BASINS OR OTHER VESSELS CONTAINING WATER.

EQUIPMENT

Hair styler – 1 pc.
Instruction manual (warranty card is included) – 1 pc.

PRODUCT DESCRIPTION

A. Vent Channel releases excess moisture as steam
B. Ceramic wave plate
C. Temperature control dial
D. ON/OFF switch
E. 360° swivel cord

Unique steam vent and channel design

Unique steam vents and channels allow this styler to be safely used on wet or dry hair. The channels extract moisture from damp hair and allow steam to escape through the vents, drying hair and sealing the cuticle at the same time. Creates salon curls, shiny hair in less time, with less damage.
Ceramic heating elements protect against damaging hot spots with high, even heat to lock in moisture and create long-lasting styles.

Automatic shut-off

This styler is equipped with an automatic shut-off. This safety feature turns the unit off after 60 minutes, in case you accidentally leave it on after styling your hair.

HOW TO USE

Styler settings

Take extra care when using a professional styler. To prevent hair damage, make sure to use the correct settings for your hair type.

Wet/Dry Setting

This styler can be used on wet or dry hair. When the light is red, it is safe to use on dry hair. When the light is green, it is safe to use on damp/wet hair.

USAGE TIPS

NOTE: please see the “Wet/Dry setting” chapter above. This device is intended for household use. Use on Alternating current only. This unit is designed to be operated at 110-240 volts AC.

TO CURL HAIR

Gently towel fry hair to remove excess water. Avoid rubbing hair with a towel, a this creates split ends and frizziness. Detangle hair with a wide-toothed comb.
Plug the styler into an electrical outlet. Push the on/off switch to turn the styler on. The indicator light will begin to glow.
Adjust the temperature using the dial.
Divide hair into manageable sections and clip the upper layers on top of your head and out of the way. Work with the underneath layers first.
Test the styler on a small section of hair, and then adjust the temperature up or down before styling the rest of your hair.
NOTE : if you find that you need a higher temperature setting while styling your hair, simply adjust the dial to a higher number. While styling your hair, if you find that you need a lower temperature, adjust the dial to a lower heating setting.
Take a small section of hair and comb through it with a fine-toothed comb. Pull hair down and away from your scalp, and hold it taut.
Hold the styler with the steam vents facing away from your scalp. Starting at the roots, clamp hair firmly between the plates and run the styler down the entire hair strand, from root to tip, in one smooth stroke. Do not hold it in one area for a long period of time or damage to hair may occur.
To speed up drying at the roots, you may wish to run the styler over the first few inches of hair nearest the root several times. Repeatedly rin the unit smoothly down the entire stand until hair is fully dried. (Note: The unit may make a steaming/hissing noise when used on damp hair. This is okay! The unique design of this styler will channel the moisture away from hair and out the steam vents)
Repeat with all sections of your hair. Working with the underneath layers first, then the top and side, until you achieve the hairstyle you desire.
When you are finished the styling, press the on/off button to turn the unit off, unplug it, and allow it to cool before storing.

TO ADD CURLS OR FLIPS

Add a soft curl or flip to ends of hair by twisting iron slightly under to curl, up to flip.

CLEANING AND MAINTENANCE

The appliance must be unplugged before cleaning.
Let the appliance cool down before touching or cleaning.
Use a damp cloth to clean the plates and housing.
Do not use any harsh detergents, abrasives, solvents or cleaners. Never immerse in water to clean.
Dry thoroughly before use.
Do not replace the mains supply lead into the appliance – always use an authorized representative or qualified technician.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
The manufacturer reserves the right to change the characteristics of devices that do not affect the operational quality indicators, without prior notice.

DEVICE PRODUCTION DATE

The production date is indicated on the device itself (in the serial number) after “S/N”, in the format: MMYYYYXXXXXXXXXX, where MM is the month of production, YYYY is the year of production.

Warranty conditions:

The plant guarantees normal operation of the product within 12 months from the date of the sale, provided that the consumer complies with the rules of operation and care provided by this Manual.
Service life of the product is 5 years.

In order to avoid any misunderstanding we kindly ask you to carefully study the Owner’s Manual, the terms of warranty, and check the correctness of filling the Warranty Card. The Warranty Card is valid only if the following information is correctly and clearly stated: model, serial number of the product, date of sale, clear seals of the company-seller, and signature of the buyer. The model and serial number of the product must correspond to those specified in the Warranty Card. If these terms are violated, and if the information specified in the Warranty Card is changed, erased or rewritten, the Warranty Card is considered invalid. Setup and installation (assembly, connection, etc.) of the appliance are described in the attached documentation; they can be carried out both by the user, and by specialists having the necessary qualifications sent by USC or selling companies (on a paid basis). In this case, the person (the institution) installing the appliance shall be responsible for the correctness and quality of installation (setup). Please pay attention to the importance of the correct installation of the appliance, both for its reliable operation, and for obtaining warranty and free service. Require the installation specialist to enter all the necessary information about the installation in the Warranty Card.

In case of failure of the appliance during the warranty period by the fault of the manufacturer, the owner is entitled to free warranty repair upon presentation of the correctly filled Warranty Card together with the appliance in the factory configuration packed in the original packaging to the warranty workshop or the place of its purchase. Satisfaction of the customer’s claim due to the fault of the manufacturer shall be made in accordance with the law «On Protection of Consumers’ Rights». In the case of warranty repair the warranty period shall be extended for the period of repair and shipment.

WARRANTY CARD

Dear Buyer! Congratulations on your purchase of the ARDESTO brand appliance, which was designed and manufactured in accordance with the highest quality standards, and we thank you for choosing this particular instrument.
We ask you to keep the coupon during the warranty period. When purchasing a product, require a full warranty card.

Warranty service is carried out only if there is a correctly and clearly filled original warranty card, which indicates: the product model, date of sale, serial number, warranty service period, and the seller’s seal. *
The service life of household appliances is 5 years.
The product is intended for consumer use. When using the product in commercial activities, the seller/manufacturer does not bear warranty obligations, and after-sales service is performed on a paid basis.
Warranty repair is carried out within the period specified in the warranty card for the product in an authorized service center on the conditions and terms determined by applicable law.
The product is withdrawn from the warranty in case of violation by the consumer of the operating rules set forth in the instruction manual.
The product is removed from warranty service in the following cases:
- misuse and non-consumer use;
- mechanical damage;
- damage caused by the ingress of foreign objects, substances, liquids, and insects;
- damage caused by natural disasters (rain, wind, lightning, etc.), fire, domestic factors (excessive humidity, dust, aggressive environment, etc.)
- damage caused by non-compliance of power and cable network parameters with state standards and other similar factors;
- when operating equipment in the power supply network with a missing single ground loop;
- in case of violation of seals installed on the product;
- lack of serial number of the device, or inability to identify it.
The warranty does not cover consumables and accessories, as well as filters, shelves, drawers, stands and other containers for storing products.
The warranty period is 12 months from the date of sale. * Tear-off maintenance tickets are provided by an authorized service center.
The completeness of the product is checked. I have read the terms of the warranty service, no complaints.