BE COOL BC29TFRC Ventilator Schwarz Instruction Manual

: June 4, 2024
: BE COOL

Table of Contents

BE COOL BC29TFRC Ventilator Schwarz
Product Information
Product Usage Instructions
DESCRIPTION OF THE DEVICE
REMOTE CONTROL
ASSEMBLY
Inserting/replacing the batteries in the remote control
COMMISSIONING
OPERATION
CLEANING INSTRUCTIONS
GUARANTEE
FAQ
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BE COOL BC29TFRC Ventilator Schwarz

Product Information

Specifications:

Power Supply: 220-240V~
Frequency : 50-60 Hz
Power Consumption: 50W
Noise Level: 46 dB(A)
Dimensions: 270 x 745 x 270 mm
Weight : 2.40 kg

Product Usage Instructions

Assembly : Follow the provided instructions for assembling the tower fan. Ensure it is placed on a stable and flat surface.
Battery Installation: To insert or replace batteries in the remote control, follow the guidelines provided in the manual. Always use fresh batteries.
Operation : To power on/off the fan, use the POWER button on the unit or remote control. Adjust the fan speed using the SPEED function for horizontal air distribution.
Cleaning Instructions: Regularly clean the fan as per the cleaning guidelines provided. Ensure the fan is unplugged before cleaning to prevent accidents.

PLEASE READ THE OPERATING INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION, OPERATION OR MAINTENANCE. PROTECT YOURSELF AND OTHERS BY FOLLOWING THE SAFETY INSTRUCTIONS. FAILURE TO FOLLOW INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND/OR LOSS OF WARRANTY COVERAGE!

IMPORTANT SAFETY, LOCATION AND ELECTRICAL CONNECTION INFORMATION.

Intended use
The fan is designed exclusively for the ventilation of dry rooms. It is intended for private use only and is not suitable for commercial use. Only use the fan as described in these operating instructions.

Only use this appliance in accordance with the guidelines in the operating instructions. Any other use not recommended by the manufacturer could result in fire, electric shock or personal injury.
Remove the packaging and make sure that the unit is not damaged. If in doubt, do not use the unit and contact the service centre or your dealer.
Keep children away from packaging materials. There is a danger of choking if swallowed!
If the power supply cable is damaged, it must be replaced by the manufacturer or an authorised service centre in order to avoid all possible risks.
Before connecting to the mains, you must check that the type of current and mains voltage correspond to the specifications on the appliance rating plate.
The electrical socket in which you connect the unit must not be defective or loose and must be suitable for the required current load and, above all, reliably earthed.
Avoid using an extension cord as it could overheat and cause a fire.
It is forbidden to adapt or modify the characteristics of this appliance in any way and use only spare parts and accessories recommended by the manufacturer (failure to do so will invalidate the guarantee and warranty).
If the unit has a defect, switch it off and contact your dealer or the customer hotline.
Always and only contact customer service centres authorised by the manufacturer for any repairs to the appliance, mains plug or cable. You can find the service centres online at www.becool.at.
Children under the age of 8 and persons with reduced physical, mental, sensory or spiritual capabilities or lack of experience and knowledge should not use this appliance unless they have been given supervision and instruction concerning use of the appliance in a safe way and understand the hazards involved.
Do not operate the appliance unattended. If you leave the room, always switch off the unit.
Children must not play with the appliance.
Do not twist or bend the mains cable.
Do not use the appliance with wet hands.
Do not use the unit outdoors.
Never operate the unit in rooms where gas, oil or sulphur are present.
Do not use the unit near water or high humidity, e.g. in damp basements, next to swimming pools, bathtubs or showers. Make sure that no water enters the unit.
Do not place any objects on the unit.
Place the unit on a stable and level surface.
Never cover the unit.
Never insert fingers, pens or other objects into the unit and make sure that the air inlet and outlet are never blocked.
Always switch off the appliance before unplugging it from the mains.
Do not pull on the mains cable to disconnect the appliance from the mains power. Always pull on the plug to unplug the mains cable.
Do not handle the plug with wet hands to avoid electric shock.
Unplug the appliance when you are not using it, before cleaning it, when it needs maintenance or when it is moved from one place to another.
Keep the unit in good condition by maintaining and cleaning the unit. If you have any questions about maintenance, you can contact the customer hotline/service centre authorised by the manufacturer.
Keep and store the appliance in a safe, dry place out of reach of children when not in use.

Recycling, disposal, declaration of conformity

_ _RECYCLING__| _ _RECYCLING__

The packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.

---|---
_ _DISPOSAL__

| DISPOSAL

The symbol “crossed-out dustbin” requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally dangerous substances.

Therefore, do not dispose of it in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. By doing so, you will help to protect resources and the environment. For more information, please contact your dealer or local authorities. Directive 2012/19/EU

_ _BATTERY DISPOSAL__

| BATTERY DISPOSAL

The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) states that waste electrical equipment must not be disposed of with normal unsorted municipal waste. Waste equipment must be collected separately in order to optimise the recovery and recycling of the materials it contains and to reduce the impact on human health and the environment. The crossed-out “wheeled bin” symbol on the product reminds you of your obligation to dispose of the product properly. If the product has a built-in battery or uses batteries, they should be removed from the product and disposed of properly.

Consumers must contact their local authorities or dealer for information on the proper disposal of waste equipment and/or its batteries

DECLARATION OF CONFORMITY

| DECLARATION OF CONFORMITY

We hereby confirm that this article complies with the basic requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link:

https:// www.schuss-home.at/downloads

DESCRIPTION OF THE DEVICE

REMOTE CONTROL

A: ON/OFF button (POWER)
B: Speed button (SPEED)
C: Button for the swivel function (OSC)
D: Button for time preselection (TIMER)
E: Mode button (MODE)

ASSEMBLY

Inserting/replacing the batteries in the remote control

Open the battery cover on the underside of the remote control, press the buckle on the battery cover inwards and pull it out, remove the battery fuse strip. Please pay attention to the correct polarity (+/-).

To replace the battery, please follow the steps below:

Open the battery cover on the bottom of the remote control, press the buckle on the battery cover inwards and pull it out, remove the old battery.
Please ensure correct polarity (+/-) Use only type CR2025 and dispose of the old batteries in an environmentally friendly manner and in accordance with the regulations in your country.
Slide the battery cover on the bottom of the remote control back into the remote control.

Be careful not to bend the contacts. Insert the new battery and close the battery compartment cover.

NOTE
If you do not use the remote control for a longer period of time (4 weeks or longer), remove the batteries from the remote control.

COMMISSIONING

Place the unit on a stable, level and dry surface (do not use in wet rooms).
Insert the plug into a standard 220~240V socket.
The functions of the fan can be set both with the help of the remote control and directly on the unit with the buttons on the control panel.
If the remote control is used, it must be pointed directly at the unit to ensure proper operation.

OPERATION

POWER:
To switch the fan on and off, use the POWER button.
SPEED:
Press the SPEED button repeatedly until the desired speed appears on the display: low (LO), medium (MI) or high (HI).
OSCILLATION
The OSC key starts and stops the panning function. The symbol is shown on the display.
NOTE: This function distributes the discharged air to the left and right. This way you achieve a horizontal air distribution in the room.
MODE :
By pressing the MODE button, you can set the fan to Eco (EC), Nature (NT) or Sleep (SL) mode. The selected mode is shown on the display.
TIMER :
The fan is equipped with a timer that allows you to set the operating time from 0.5 hours to 7.5 hours. Press the TIMER button until the desired number of hours appears in the display.

CLEANING INSTRUCTIONS

Always disconnect the appliance from the mains by switching it off and unplugging it from the socket before cleaning.
It is advisable to use a neutral detergent and a soft cloth and rub dry. Do not use solvents, acidic cleaning agents, petrol or alcohol, etc. to clean the plastic parts as they may be deformed or damaged.
Make sure that no water enters the motor during cleaning.

Technical information

Technical information

www.becool.at

Company register no.: 236974t Commercial Register Court: Vienna

GUARANTEE

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.
For this BECOOL appliance we grant a warranty period of 2 years from the date of purchase valid in Austria!
If, contrary to expectations, service work should nevertheless be necessary on your device during this period, we hereby guarantee to repair the device free of charge (spare parts and labour) or (at the discretion of Schuss) to exchange the product. Should neither repair nor exchange be possible for economic reasons, we reserve the right to issue a credit note for the current value.
In the case of air conditioners, please contact the customer hotline as a first step (see sticker on the unit or cover page of the operating instructions), in the case of fans, please contact your specialist dealer or us directly. We would like to point out that repair work that has not been carried out by the authorised contract workshop in Austria will immediately terminate the validity of this warranty.

This warranty does not cover:

We do not accept any liability for consequential damage in the event of improper use.
Repair or replacement of parts due to normal wear and tear
Damage due to non-observance of the operating instructions
Devices that are used – even only partially – for commercial purposes
Equipment mechanically damaged by external influence (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
Equipment that has been improperly handled
Units that have not been opened by our authorised service workshop.
Damage caused as a result of improperly closed condensation drain valves of air conditioners or improperly inserted water tank.
Consumer expectations not met.
Damage is caused by force majeure, water, lightning, and overvoltage.
Units where the type designation and/or serial number on the unit has been changed, deleted, made illegible or removed.
Services outside our authorised workshops, the transport costs to an authorised workshop or to us and back, and the associated risks.

We expressly point out that within the warranty period, a lump sum of € 60,- (indexed basis CPI 2010, June 2015) will be charged in case of operating errors or if no error was detected. The provision of warranty service (repair or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase. The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the unit) and the corresponding warranty certificate, on which the type of unit, as well as the serial number (visible on the box and on the back or bottom of the unit), must be noted! Without the warranty certificate, only the legal warranty applies! We expressly point out that the statutory warranty rights are not affected by this guarantee and continue undiminished. Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent. Liability for loss of profit, expected but not realised savings, consequential damage and damage from third-party claims is excluded in any case. Damages to or for recorded data are always excluded from the liability for damages. Congratulations on your choice. We hope you enjoy your BE COOL appliance!

ADDRESS Distribution BE COOL:
Schuss Home Electronic GmbH A-1140 Vienna, Scheringgasse 3 Tel.: +43 (1) 970 21

Type designation : …………….
Serial number : …………………

In the event of a warranty claim, this warranty certificate must be handed over to the authorised service centre together with the unit.

FAQ

Q: What should I do if the fan malfunctions?
A: If the fan has issues, turn it off and contact the retailer or customer service hotline for assistance. Do not attempt to repair it yourself.

Q: How can I find authorized service centers for repairs?
A: For any repairs or maintenance needs, only consult authorized service centers recommended by the manufacturer. Visit www.becool.at for a list of authorized service centers.