BE COOL BC23GSDT2 Garden Socket Outlet 2 Gang with Timer Instruction Manual

BE COOL BC23GSDT2 Garden Socket Outlet 2 Gang with Timer

CONGRATULATIONS!
THANK YOU FOR CHOOSING A BECOOL PRODUCT.

Current operating instructions

Download current operating instructions via the link www.becool.at/downloads or scan the QR code shown. Follow the instructions on the website.

Scope of delivery

• Garden socket
• 2 x screw
• 2 x dowel
• Operating instructions

Intended use

The product has 2 sockets that can be switched on and off automatically via a mechanical timer to control 2 electrical devices such as pond aeration, fountains and garden lighting. The switching time is at least 15 minutes and the sockets can also be activated permanently. The maximum power consumption of all connected devices must not exceed 3680 W. The product is splash-proof and suitable for outdoor use. Modifications and conversions are prohibited for safety and approval reasons and may cause hazards such as short circuit, fire or electric shock. Please read the operating instructions carefully and keep them. Only pass on the product together with the instructions. The product complies with the legal requirements. All company names and product designations are trademarks of their respective owners. All rights reserved.

Symbol explanation

The symbol with the lightning bolt in a triangle is used when there is danger to your health, e.g. from electric shock.

The symbol with the exclamation mark in the triangle indicates important instructions in these operating instructions that must be followed.

The arrow symbol can be found when special tips and notes on operation are to be given to you.

Safety instructions

Please read the operating instructions carefully and pay particular attention to the safety instructions. If you do not follow the safety instructions and instructions for correct handling, we accept no responsibility for damage to persons or property. In addition, the warranty/guarantee becomes invalid in such cases.

• Only use the appliance with a proper mains socket.
• Make sure that the power socket is nearby and easily accessible.
• Never pull the mains plug out of the socket by the cable, only by the mains plug.
• Unplug the appliance if it is not going to be used for a long time.
• Always pull the plug out of the socket during a thunderstorm.
• Make sure that the mains cable is not crushed, kinked, damaged or otherwise stressed. Avoid excessive heat or cold stress on the cable. Do not modify the power cord. A damaged mains cable can cause an electric shock.
• Do not use the product if the power cord is damaged. Switch off the power socket and carefully pull out the plug.
• Only have a damaged mains cable replaced by a qualified specialist.
• Do not plug in or unplug the mains plug with wet hands.
• Do not overload the product and observe the power specification in the technical data.
• Do not use multiple sockets or plug them in one after the other as this can lead to an overload and fire hazard.
• Do not operate the product covered, as it may overheat and catch fire.
• The product is only de-energised when the mains plug is disconnected.
• Do not point a jet of water at the product.
• The product is not a toy and should be kept away from children and animals.
• Dispose of the packaging material safely so that it does not become a dangerous toy.
• Protect the product from extreme temperatures, direct sunlight, strong vibrations, high humidity, moisture, flammable gases, vapours and solvents.
• Do not subject the product to mechanical stress.
• Remove the product from service if it shows visible damage, no longer functions properly, has been stored for a long time under unfavourable conditions or has been subjected to considerable transport loads.
• Handle the product with care to avoid damage from bumps, knocks or falling.
• Also observe the safety instructions and operating instructions of the devices to which the product is connected.
• Consult a professional if you have any questions or are unsure how to use the product.

Operating elements

1. Indicator showing that the product is powered (timer)
2. Indicator showing whether the sockets are switched on (ON) or off (OFF) (indicator ON/OFF)
3. Arrow in the shape of a triangle indicating the current time (triangular arrow)
4. Switch for selection between continuous operation or timer operation (slide switch)
   

Installation site

• Do not place the product in a recess or depression as water may remain there.
• Instead, choose a firm, level and horizontal place from which the rainwater can run off without getting inside the enclosure.

Commissioning

• Connect the mains plug to a suitable mains socket. The small timer (1) inside the timer starts the display. One complete 360° rotation corresponds to one minute.
• Synchronise the timer with the current time:
• Wait until it is exactly on the hour or 15, 30 or 45 minutes after.
• Turn the outer ring of the timer clockwise so that the tip of the triangular arrow (3) points to the current time.
• In the illustration, the arrow indicates 20:15.
• If the product is disconnected from the power supply, you must synchronise the timer again.
• Use the 96 small levers to set the time period in which the connected units are to be switched on.
  • Press the levers outwards for the period of time during which the connected devices are to be activated. Use e.g. the tip of a pen or a small screwdriver. Be careful and do not use force, otherwise the levers could break off.
  • For example, the connected units are switched on at 18:45 and switched off at 20:30 if the levers are set as shown in the illustration.
  • For example, if you press every other lever outwards, the connected devices are switched on and off at intervals of 15 minutes.
• To switch the connected loads on and off via the timer, the slide switch must be set to the lower position .
• To switch on the consumers permanently, move the slide switch up to the “I” position.
• The ON/OFF indicator (2) shows whether the sockets are activated (ON) or deactivated (OFF).
• Connect the consumers to the sockets and avoid pinching the cables when you close the housing flap.
• Switch on the connected devices as soon as the sockets are activated.

Cleaning and care

• The product does not require user maintenance and should not be opened or disassembled. Repairs may only be carried out by a qualified specialist or workshop.
• Do not use aggressive cleaning agents or chemicals, as this may damage the housing or impair its operation.
• Avoid cleaning the product with water jets such as from a high-pressure cleaner.
• Before any cleaning, disconnect the product from the power supply and from any connected device.
• Use a slightly damp cloth to clean the housing and a few drops of mild washing-up liquid for heavier soiling.

Recycling, disposal, declaration of conformity

| _ _RECYCLING__

The packaging materials can be recycled. Therefore, it is recommended to dispose of them in sorted waste.

---|---
| _ _DISPOSAL__

The symbol “crossed-out dustbin” requires the separate disposal of waste electrical and electronic equipment (WEEE). Electrical and electronic equipment may contain hazardous and environmentally dangerous substances. Therefore, do not dispose of this in unsorted residual waste, but at a designated collection point for waste electrical and electronic equipment. By doing so, you will help to protect resources and the environment. For more information, please contact your dealer or local authorities. Directive 2012/19/EU

| DECLARATION OF CONFORMITY

We hereby confirm that this article complies with the basic requirements, regulations and directives of the EU. You can view the detailed declaration of conformity at any time under the following link: https:/ /www. s chuss-home.at/downloads

• Errors and technical modifications excepted

Technical data

GUARANTEE

With this quality product from BE COOL, you have made a decision for innovation, durability and reliability.

For this BE COOL appliance we grant a warranty period of 2 years from the date of purchase valid in Austria! If, contrary to expectations, service work should nevertheless be necessary on your device during this period, we hereby guarantee to repair the device free of charge (spare parts and labour) or (at the discretion of Schuss) to exchange the product. Should neither repair nor exchange be possible for economic reasons, we reserve the right to issue a credit note for the current value.

This warranty does not cover:

• In the event of improper use, we do not accept any liability for consequential damage, repair or replacement of parts due to normal wear and tear.
• Damage due to non-observance of the operating instructions
• Devices that are used – even only partially – for commercial purposes
• equipment mechanically damaged by external influence (fall, impact, breakage, improper use, etc.) as well as wear and tear of an aesthetic nature.
• Equipment that has been improperly handled
• Units that have not been opened by our authorised service workshop.
• Consumer expectations not met.
• Damage caused by force majeure, water, lightning, overvoltage.
• Units where the type designation and/or serial number on the unit has been changed, deleted, made illegible or removed.
• services outside our authorised workshops, the transport costs to An authorised workshop or to us and back, as well as the associated  Risks.

Please note that the direct costs of returning the goods to the service centre are to be borne by the consumer.

The provision of warranty service (repair or replacement of the appliance) does not extend the absolute warranty period of 2 years from the date of purchase.

The 2-year warranty is only valid on presentation of the purchase receipt (must contain the name and address of the dealer as well as the complete designation of the unit) and the corresponding warranty certificate, on which the type of unit as well as the serial number (visible on the box and on the back or bottom of the unit) must be noted! Without the warranty certificate, only the legal warranty applies!

We expressly point out that the statutory warranty rights are not affected by this guarantee and continue undiminished.

Schuss Home Electronic GmbH and its vicarious agents shall only be liable for damages in the event of gross negligence or intent. Liability for loss of profit, expected but not realised savings, consequential damage and damage from third party claims is excluded in any case. Damages to or for recorded data are always excluded from the liability for damages.

Congratulations on your choice. We hope you enjoy your BE COOL appliance!

In the event of a warranty claim, this warranty certificate must be handed over together with the unit to the authorised service workshop or the dealer from whom you purchased the unit!

Customer Support

Be Cool Distribution
Schuss Home Electronic GMBH
A-1140 Vienna, Scheringgasse 3
Tel.: +43 (0)1/970 21

References

• Downloads » Schuss Home Electronic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>