UBIQUITI UVC-G5 Turret Protect Ultra Camera Instruction Manual

UBIQUITI UVC-G5 Turret Protect Ultra Camera

Product Information

• Model: UVC-G5-Turret-Ultra
• Compliance: Directives 2014/30/EU, 2014/35/EU
• Manufacturer: Ubiquiti International Holding B.V.
• Address: Ekkersrijt 3102, Son, Netherlands

Product Usage Instructions

Installation:
Follow these steps for proper installation:

1. Mount the device securely.
2. Ensure proper positioning.
3. Connect power and network cables as instructed.

Setup:
Setting up the device:

1. Access the device interface.
2. Configure settings as needed.
3. Adjust camera angles if required.
4. Connect to AC power source.
5. Complete the setup process.

Usage:
Guidelines for using the product:

1. Monitor the camera feed regularly.
2. Review recordings when necessary.
3. Maintain proper power supply.

Frequently Asked Questions

Q: How can I access the device interface for setup?

A: You can access the device interface by connecting to its IP address through a web browser.

Q: What should I do if the camera angles need adjustment?

A: You can adjust the camera angles by physically repositioning the device or using the control options in the interface.

Q: Is it necessary to connect the device to an AC power source?

A: Yes, the device requires a stable AC power source for proper functioning.

Safety Notices

Safety Notices (if applicable)

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
   • WARNING: Failure to provide proper ventilation may cause a fire hazard. Keep at least 20mm of clearance next to the ventilation holes for adequate airflow.
   • WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.
   • WARNING: Do not use this product in a location that can be submerged in water.
   • WARNING: Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning.

Electrical Safety Information

Electrical Safety Information (if applicable)

1. Compliance is required concerning voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified may result in improper operation, damage to the equipment, or pose a fire hazard if the limitations are not followed.
2. There are no operator-serviceable parts inside this equipment. Service should be provided only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety ground wire intended for connection to a grounded safety outlet.
   • Do not substitute the power cord with one that is not the provided approved type. Never use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the grounding wire.
   • The equipment requires the use of the ground wire as a part of the safety certification, modification or misuse can provide a shock hazard that can result in serious injury or death.
   • Contact a qualified electrician or the manufacturer if there are questions about the installation before connecting the equipment.
   • Protective earthing is provided by a Listed AC adapter. Building installation shall provide appropriate short-circuit backup protection.
   • Protective bonding must be installed under local national wiring rules and regulations.

Installation

Declaration of Conformity

Hereby, UBIQUITI, declares that this device, UVC-G5-Turret-Ultra, complies with the essential requirements and other relevant provisions of Directives 2014/30/EU, 2014/35/EU. The full text of the EU Declaration of Conformity and detailed compliance information is available at the following internet address: ui.com/compliance.

Ubiquiti International Holding B.V.
Ekkersrijt 3102, Son, Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>