MEAN WELL XLG-150 Series Constant Power Mode LED Driver Owner’s Manual

MEAN WELL XLG-150 Series Constant Power Mode LED Driver

Product Specifications

Product Usage Instructions

1.   Installation:

   • Ensure the input voltage is within the specified range (100 ~ 305VAC). – Connect the driver to the LED module following the driving methods provided. – Mount the driver in a well-ventilated area to prevent overheating.

2. Adjusting Constant Current (A-Type Only):

   •  Use the built-in potentiometer to adjust the current within the range of 6.5~12.5A.

3. Power On:
   Apply power to the driver and verify that the LED module is receiving the correct voltage and current.

4. Troubleshooting:
   In case of any issues, refer to the user manual for troubleshooting steps. – Contact customer support if problems persist.

FAQ:

• Q: What is the maximum number of PSUs that can be used on a 16A circuit breaker?
  A: The maximum number is 4 units for a circuit breaker of type B and 8 units for a circuit breaker of type C at 230VAC.

• Q: How do I adjust the current output for the XLG-150 series?
  A: For A-Type drivers, you can adjust the current using the built-in potentiometer within the range of 6.5~12.5A.

150W Constant Power Mode LED Driver
XLG -150 series

Features

• Wide input range 100~305V AC( Class 1)
• Full power output at 70~100% Constant power mode operation
•  Metal case with IP67, suitable for outdoor application
• Surge protection with 6KV/4KV (10KV/6KV optional)
• 3 in 1 dimming function (Dim to off and Isolation design)
• India (EESL) version with Input Over Voltage Protection can survive input voltage stress of 440Vac for 48 hours
• Protection functions: OVP/SCP/OCP/OTP
• Compliance to EN60335-1 household application
• Life time >50,000 hrs. and 5 years warranty

Applications

• Skyscraper lighting
• Street lighting
• Floodlight Lighting
• Stage lighting
• Horticulture lighting
• Bay lighting
• DMX power supply
• Type HL for use in class I, Division 2
• Household devices
• Retail and refrigerated display

GTIN CODE
MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

XLG-150 series is a 150W LED AC/DC driver featuring the constant power mode.XLG-150 operates from 100~305VAC and offers models with different rated current ranging between 700mA and 12500mA. Thanks to the high efficiency up to 93%, with the fanless design, the entire series is able to operate for -40°C~+90°C case temperature under free air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications. Moreover the innovative environment-adaptive capability allows this series to reliably light on the LEDs for all kinds of application environments in almost any spots that may install LED luminaires in the world. XLG-150 series comply with the latest version of IEC61347/GB19510.1 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both user and luminaire system during installation.

Model Encoding

Note: 1.12V and 24V models without the AB type 2. India version needs MOQ for production, please consult MEANWELL for detail

SPECIFICATION

potentiometer)
6.5~ 12.5A| 3.2~ 6.25A
VOLTAGE TOLERANCE Note.4| ±3.0%| ±2.0%
LINE REGULATION| ±0.5%| ±0.5%
LOAD REGULATION| ±2%| ±1%
SETUP, RISE TIME Note.6| 500ms, 100ms/230VAC,  1200ms, 100ms/115VAC
HOLD UP TIME (Typ.)| 10ms/ 230VAC 10ms/ 115VAC
INPUT| VOLTAGE RANGE **Note.5**| 100 ~ 305VAC           142 ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” section)

FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR| PF≧0.97/115VAC, PF≧0.95/230VAC, PF≧0.92/277VAC@full load
TOTAL HARMONIC DISTORTION| THD<  10%(@load≧50%/115VC,230VAC; @load≧75%/277VAC)
EFFICIENCY (Typ.)| 91.5%| 93%
AC CURRENT| 1.8A / 115VAC  1.0A / 230VAC  0.8A/277VAC
INRUSH CURRENT(Typ.)| COLD START 50A(twidth=500 μ s measured at 50% Ipeak) at 230VAC ; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 4 units (circuit breaker of type B) / 8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
NO LOAD

POWER CONSUMPTION

| No load power consumption <0.5W(for standard version)
PROTECTION| OVER CURRENT| 95 ~ 108%
Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
SHORT CIRCUIT| Hiccup mode or constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 13.5 ~ 18V| 27 ~ 34V
Shut down output voltage, re-power on to recover
INPUT OVER VOLTAGE Note.7| 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage, recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours
OVER TEMPERATURE| Shut down output voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +90℃ (Please refer to “ OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+90℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH
TEMP. COEFFICIENT| ±0.06%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS Note.7|

• UL8750(type”HL”), UL879,CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, EN 60335-1 compliant to EN 60335-2-89 Annex BB, EN 60335-2-24 Annex CC;GB19510.1,GB19510.14;EAC TP TC 004; J61347-1(H29), J61347-2-13(H29),
• KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)(for XLG-150I type only);NOM-058-SCFI-2017(except for Blank type);IP67 approved

WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T 17743| —–
Radiated| BS EN/EN55015(CISPR15) ,GB/T 17743| —–
Harmonic Current| BS EN/EN61000-3-2 ,GB17625.1| Class C @load≥50%
Voltage Flicker| BS EN/EN61000-3-3| —–

EMC IMMUNITY

| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air ; Level 2, 4KV contact
Radiated| BS EN/EN61000-4-3| Level 2
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Conducted| BS EN/EN61000-4-6| Level 2
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11|

• 95% dip 0.5 periods, 30% dip 25 periods,

• 95% interruptions 250 periods

OTHERS

| MTBF| 2269.5K hrs min.  Telcordia SR-332 (Bellcore) ; 213.3Khrs min.  MIL-HDBK-217F (25℃)
DIMENSION| 1806335.5mm (LWH)
PACKING| 0.8Kg;16pcs / 13.4Kg /0.69CUFT
NOTE|

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf))
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
12. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
13. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
14. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
15. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
16. If you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.

from| Arrow.com.du|

• ct Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx
• File Name: XLG-150-SPEC  2024-03-12

MODEL| XLG-150  -L-| XLG- 150| -M-| XLG- 150| -H-
---|---|---|---|---|---
OUTPUT| RATED CURRENT  (Default)| 700mA| 1400mA| 2800mA
RATED POWER| 150W| 150W| 150W
CONSTANT CURRENT REGION| 120 ~214V| 60 ~ 107V| 27 ~ 56V
FULL POWER CURRENT RANGE| 700~1050mA| 1400~2100mA| 2680~4170mA
OPEN CIRCUIT VOLTAGE (max.)| 225V| 115V| 60V
CURRENT ADJ. RANGE| Adjustable for A/AB-Type only (via the built-in potentiometer)
350~1050mA| 700~2100mA| 1400~4170mA
CURRENT RIPPLE| 4.0%(@ full load)| 3.0%(@ full load)| 3.0%(@ full load)
CURRENT TOLERANCE| ±5%
SET UP TIME| 500ms/230VAC, 1200ms/115VAC
INPUT| VOLTAGE RANGE| Note.5| 100 ~ 305VAC            142VDC ~ 431VDC

(Please refer to “STATIC CHARACTERISTIC” ang “ DRIVING METHODS OF LED MODULE”section)

FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF≧0.97 / 115VAC, PF≧0.95 / 230VAC, PF≧0.92 / 277VAC at full load

(Please refer to “Power Factor Characteristic” section)

TOTAL HARMONIC DISTORTION| THD< 10% (@ load≧50% at 115VAC/230VAC ,@load≧75% at 277VAC) Please refer to “TOTAL HARMONIC DISTORTION (THD)” section
EFFICIENCY (Typ.)| 93%| 92.5%| 92%
AC CURRENT (Typ.)| 1.8A / 115VAC| 1.0A / 230VAC  0.8A/277VAC| |
INRUSH CURRENT(Typ.)| COLD START50A(twidth=500 μ s measured at 50% Ipeak) at 230VAC; Per NEMA 410
MAX. NO. of PSUs on 16A

CIRCUIT BREAKER

| 4 unit(circuit breaker of type B) / 8 units(circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA / 277VAC
STANDBY POWER CONSUMPTION| __

Note.14

| __

Standby power consumption <0.5W for AB-Type(Dimming OFF)(for standard version)

PROTECTION| SHORT CIRCUIT| Hiccup mode or Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 230 ~ 265V| 128~ 150V| 61 ~ 85V
Shut down output voltage, re-power on to recovery
INPUT OVER VOLTAGE Note.7| 320 ~ 390VAC (Shut down output voltage when the input voltage exceeds protection voltage,recovers automatically after fault condition is removed)
Can survive input voltage stress of 440Vac for 48 hours
OVER TEMPERATURE| Shut down output voltage, re-power on to recover
ENVIRONMENT| WORKING TEMP.| Tcase=-40 ~ +80℃(Please refer to “OUTPUT LOAD vs TEMPERATURE” section)
MAX. CASE TEMP.| Tcase=+90℃
WORKING HUMIDITY| 20 ~ 95% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +80℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.06%/℃ (0 ~ 60℃)
VIBRATION| 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC| SAFETY STANDARDS Note.7|

• UL8750(type”HL”), UL879,CSA C22.2 No. 250.13-12; ENEC BS EN/EN61347-1, BS EN/EN61347-2-13 independent, BS EN/EN62384, EN 60335-1 compliant to EN 60335-2-89 Annex BB, EN 60335-2-24 Annex CC;GB19510.1,GB19510.14;EAC TP TC 004; J61347-1(H29), J61347-2-13(H29),
• KC61347-1,KC61347-2-13,IS15885(Part2/Sec13)(for XLG-150I type only);NOM-058-SCFI-2017(except for Blank type);IP67 approved

WITHSTAND VOLTAGE| I/P-O/P:3.75KVAC  I/P-FG:2KVAC  O/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T 17743| —–
Radiated| BS EN/EN55015(CISPR15) ,GB/T 17743| —–
Harmonic Current| BS EN/EN61000-3-2 ,GB17625.1| Class C @load≥50%
Voltage Flicker| BS EN/EN61000-3-3| —–
EMC IMMUNITY| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS EN/EN61000-4-2| Level 3, 8KV air ; Level 2, 4KV contact
Radiated| BS EN/EN61000-4-3| Level 2
EFT/Burst| BS EN/EN61000-4-4| Level 3
Surge| BS EN/EN61000-4-5| 4KV/Line-Line 6KV/Line-Earth(6K/10K option)
Conducted| BS EN/EN61000-4-6| Level 2
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% dip 0.5 periods, 30% dip 25 periods,

95% interruptions 250 periods

OTHERS| MTBF| 2269.5K hrs min.| Telcordia SR-332 (Bellcore) ;| 213.3Khrs min.| MIL-HDBK-217F (25℃)
DIMENSION| 1806335.5mm (LWH)
PACKING| 0.8Kg;16pcs/13.4Kg/0.69CUFT
NOTE|

1. All parameters NOT specially mentioned are measured at 230VAC input, rated current and 25℃ of ambient temperature.
2. Please refer to “DRIVING METHODS OF LED MODULE”.
3. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
4. Tolerance : includes set up tolerance, line regulation and load regulation.
5. De-rating may be needed under low input voltages. Please refer to “STATIC CHARACTERISTIC” sections for details.
6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.
7. Input over voltage only for XLG-150 I series ,and I series without UL/CSA certificate.
8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
9. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf)
10. The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).
11. Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
12. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 75℃ or less.
13. Products sourced from the Americas regions may not have the CCC/PSE/BIS/KC logo. Please contact your MEAN WELL sales for more information.
14. For any application note and IP water proof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
15. To fulfill requirements of the latest ErP regulation for lighting fixture, this LED driver can only be used behind a switch without permanently connected to the mains.
16. If you need the NOM (Mexico) certificate, Please contact MEAN WELL sales representative for details.

Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx

from| Arrow.com.|

BLOCK DIAGRAM

DRIVING METHODS OF LED MODULE

• Recommend Performance Region
• Recommend Performance Region

This series is able to work in either Constant Current mode (a direct drive way) or Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

DIMMING OPERATION

3 in 1 dimming function (for AB-Type)

• Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
• Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
• Dimming source current from power supply: 100μA (typ.)

Applying additive 0 ~ 10VDC

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

Applying additive resistance:

Note :

1. Min. dimming level is about 8% and the output current is not defined when 0%< Out<8%.
2. The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.

OUTPUT LOAD vs TEMPERATURE

• If XLG-150 operates in Constant Current mode with the rated current the maximum workable Ta is 55℃ (Typ. 230VAC) or 40℃(Typ.100VAC)
• Below 110VAC@ -30℃ may retry to 2nd setup

STATIC CHARACTERISTIC

• POWER FACTOR (PF) CHARACTERISTIC
  

• Tcase at 75℃

• Constant Current Mode

• TOTAL HARMONIC DISTORTION (THD)
  • XLG-150-L Model, Tcase at 75℃
• EFFICIENCY vs LOAD
  • XLG-150 series possess superior working efficiency that up to 93% can be reached in field applications.
  • XLG-150-L Model, Tcase at 75℃

LIFE TIME

MECHANICAL SPECIFICATION

A-Type

AB-Type

Recommend Mounting Direction

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

• FileName: XLG-150-SPEC 2024-03-12
• Downloaded from Arrow.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>