MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar User Manual

: June 5, 2024
: MAJORITY

MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar

MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar
product

WHAT’S IN THE BOX

MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar 1

A. Majority Atlas PC Sound bar
B. Power Adapter
C. Instructions Guide

CONTROLS & FUNCTIONS

TOP VIEW

MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar 2

⏯ Play/Pause
⏮ Previous/Rewind
Indicator light
⏭ Next/Fast forward
Mode

FRONT VIEW

6. On/Off/Volume

BACK VIEW

MAJORITY ATL-BAR-BLK AL Atlas Bluetooth Sound Bar 4

7.SD card slot
8. DC 5V power input
9. USB slot
10. AUX input

SETTING UP YOUR MAJORITY ATLAS

Connecting and powering the unit

Using the USB to Mini USB power cord provided, plug the mini USB connector into the back of the unit and plug the other end into a USB power supply (mains adaptor or other USB power supply.

Switch on your Majority Atlas Sound bar

Switch the unit on by rotating the On/Off/Volume dial clockwise until the dial clicks into place and the sound bar is powered on. To switch the unit off, rotate the dial anti clockwise until the dial will not rotate any further.

Basic operations

Use the On/Off/Volume dial to switch the unit on or off and change the volume. In Bluetooth, SD, or USB mode, use the ⏯ button to play or pause a track, and use the ⏮ ⏭buttons to skip tracks or fast forward/rewind (press and hold to rewind or fast forward. Press the MODE button to change modes between SD card, Bluetooth, AUX and USB mode.

BLUETOOTH, SD & USB CONTROLS

Please note that the following controls and functions relate to Bluetooth, SD card and USB mode only. For AUX controls and functions, please see the section titled AUX Mode in the table below, (H) = Press and hold.

Sound bar button| Function|
---|---|---
⏮ ⏭| Previous/next track|
(H) ⏮ ⏭| Rewind/Fast forward|
⏯| Play/Pause|
MODE| Change mode|
On/Off/Volume Dial| Power On/Off/Volume+/-|

BLUETOOTH MODE

Connecting a Bluetooth device

To connect an external device to the Atlas sound bar, ensure that the sound bar is in Bluetooth mode. Select ‘Bluetooth’ mode manually by using the MODE button. The sound bar will sound with the phrase Bluetooth mode to indicate that Bluetooth mode is now active. The sound bar indicator light will flash until successfully connected to a Bluetooth device. Switch Bluetooth on for your external device. Select Majority Atlas from the list of devices. When connected, the indicator light will remain static blue. When your external device is connected, the sound bar will sound with the phrase Connected to indicate successful connection. You can now play audio through the speakers. When disconnected, the sound bar will sound with the phrase Disconnected. If the unit is switched to a different mode while Bluetooth is connected, Bluetooth will automatically be disconnected.

USB & SD CARD MODE

USB and SD Card

When a USB or SD card is inserted, the unit will automatically switch to the correct mode and begin playing audio. If necessary, select USB or SD mode using the MODE button.

USB

Insert a USB drive into the USB port at the back of the unit (Ref.9). When USB mode is selected, the sound bar will sound with the phrase ‘USB driver mode. Maximum compatible storage: 64GB.

Micro SD card

Insert a micro SD card into the SD port at the back of the unit. When SD card mode is selected, the sound bar will sound with the phrase SD card mode. Maximum compatible storage: 64GB.

AUX MODE

Use the included 3.5mm to 3.5mm AUX cable to connect an external device to the AUX input of the Majority Atlas.

Switch to AUX mode

When an AUX cable is plugged in to the AUX port at the rear of the speaker the unit will automatically switch to AUX mode indicated with Line in mode. If necessary, select AUX mode using the Mode button.

Controls and Functions AUX

Sound bar button| Function|
---|---|---
⏯| Play/Pause|
MODE| Change mode|
On/Off/Volume Dial| Power On/Off/Volume+/-|

FCC Caution

Labelling requirements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions. This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. – §15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Information to the user.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

TROUBLESHOOTING

Observation	Potential Cause/Solution

No power/function

| Check whether the power is switched on or off at the wall.

Check that the power adaptor is properly connected to the power outlet.

No sound

| Check whether MODE is correctly selected. If you are connected via Bluetooth or AUX, turn up the volume on your device.

Function disturbance

| Switch off and unplug the unit. Leave it for 2 minutes and switch it on again.

Bluetooth not connecting

| Ensure that the sound bar is in Bluetooth mode and the Bluetooth on your device is switched on. Select the Bluetooth device Majority Atlas and you should now be able to play audio.

SUPPORT

If you require further assistance with your new sound bar, please contact our support team on the Majority website: www.majority.co.uk/support

SPECIFICATION

Power Supply	DC 5V
Mode	Bluetooth 3.5mm AUX-in USB reader

SD card reader

64GB

WARRANTY
All products come with a standard 12 month warranty. All items must be registered on www.majority.co.uk for the warranty to be valid. Once on the web page, use the menu to find “Register Your Product”. You will also be given the chance to extend your warranty for an additional 24 months, free of charge.