CREATE Air RC Tower Fan Ultra Quiet with Remote Control User Manual

CREATE Air RC Tower Fan Ultra Quiet with Remote Control

SAFETY PRECAUTIONS

•  The unit may be used only for the intended purposes. The manufacturer will not be held responsible for damages resulting from improper use or faulty handling.
•  Do not use outdoors or for commercial purposes. This appliance is intended for house­hold use only.
•  Using the unit for commercial purposes will void the warranty.
•  Ensure that the voltage indicated on the Technical Specifications matches the mains voltage before plugging in the appliance.
•  Children should be supervised to ensure that they do not play with the appliance or the packaging material.
•  This appliance can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given su­pervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
•  Do not connect this appliance to an extension cord.
•  Never lift up, carry or unplug the appliance by pulling from the power cord.
•  Do not touch the fan’s moving parts. Never insert any objects through the grille when the fan is working.
•  Always unplug the appliance before cleaning or when idle.
•  To avoid risk of electric shock, do not plug the appliance in a damp or wet room
•  Never immerse the cord, plug or main body of the appliance in water or other liquids. Should the unit fall into water, immediately unplug it from the mains and have the appliance checked by an expert before using it again. It may cause fire, electric shock, injury or death.
•  Only use accessories recommended by the manufacturer.
•  When not in use, store in a safe, dry, childproof location.
•  Do not pick up or operate the appliance if the power supply cord or the plug are dam­aged, or if the unit is malfunctioning or has been dropped or damaged in any way. In case of damage, contact the aftersales service. A damaged cord or plug must be ex­clusively replaced by the manufacturer or a qualified person In order to avoid injuries.

PARTS LIST

1.  Control panel
2.  LED display
3.  Main body
4.  Air outlet
5.  Stand
6.  Base

ASSEMBLY

1. snap the two pieces of the base together Snap using the two pieces of the base here togeth­screws using a Phillips screwdriver
2.  Once base, you have feed the attached power both cord pieces through of the centre hole of the l base. on the The base bottom is to put equipped the with cord a through.
3. Align the main body of 3 the long fan screws with  the base secure it using 3 long screws and Phillips screwdriver

REMOTE CONTROL

1.  Install the battery (not included).
2.  All of the buttons on the remote work as the ones on the control panel

OPERATING INSTRUCTIONS

You can operate the appliance using the controls on the fan or with the remote control Place the fan on a stable flat surface and plug it into a 220 – 240V-A.C. electrical outlet.

• Power : Turn the fan on by pressing the MPower button”. To turn the fan off, press the button again.
• Speed : Use the Mspeed button” to select the desired speed.Low speed
  • Medium speed
  • High speed
  • The speed setting will be displayed on the LED panel
•   Mode : The “Mode” button switches between the different modes.
  • NM: Normal
  • NT: Natural
  • SL: Sleep
•   Timer: The fan is equipped with a timer that allows you to set the operation time from half an hour to 7.5 hours.
• Oscillation : Press the [OSC] button to turn on and off the oscillation feature.

CLEANING AND MAINTENANCE

• Always unplug the appliance before cleaning and maintaining the appliance.
• There are no user serviceable parts inside, please contact the aftersales service.
•  To clean the fan, wipe the outer surface with a soft, damp cloth and use a brush to dust the air outlet.
•  Do not clean the appliance with alcohol or any solvent cleaning products. Never im­merse the housing in water for cleaning.

In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec­tric and elec1ronlc equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that have reached the end of their useful llfe must be given to waste disposal centres specialising in separate collection of waste electrical end elec1ronic equipment or given back to the retailer at the time of purchasing new similar equipment, on a one for one basis. The edequete separate collection for the subsequent startsUp of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the enViron­ment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the product by the user involves application of the administrator,e sanctions according to the laws.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>