Kong BLINDER 900 Front Light USB C Rechargeable User Guide
- June 1, 2024
- KONG
Table of Contents
Kong BLINDER 900 Front Light USB C Rechargeable
Specifications
- Product Name: Blinder 900
- Charging Port: USB Type-C
- Battery Status Indication: Amber (Charging), Green (Fully Charged)
- Output Reduction: 30% when Power Button Light is flashing red
Product Usage Instructions
To enable the full function of the light, connect it to a USB-C charger. Follow these steps:
- Lift the charging port hatch.
- Insert the USB Type-C charging cable.
- Once the charging cable is inserted, the power button will glow amber indicating the light is in charging mode.
- When fully charged, the power button will glow green.
Checking Battery Status
To check the battery status, perform a quick press of the power button when the light is switched off. The indicator will show the battery level.
Mounting the Light
- Select the corresponding hole to suit your bar diameter.
- Firmly hold the mount in place and stretch the strap downwards.
- Pull the strap around the bar and secure it on the hook.
- Place the light in the cradle and complete mounting by pulling up on the tab while applying downward pressure to click the light into position. Ensure it is secure before riding.
Note: Refer to your Go-Pro or computer mount instructions to complete the Blinder under-mount installation.
FAQ
- Q: What should I do if the power button light is flashing red?
- A: When the power button light is flashing red, the light’s output will be reduced to 30% to preserve runtime.
- Q: How do I know if the Blinder 900 is fully charged?
- A: The power button will glow green when the Blinder 900 is fully charged. After 1 minute, the green light will turn off.
- Q: Can I ride with the under-mount unlocked?
- A: No, make sure the under-mount is locked securely before riding. Do not ride with the under-mount unlocked.
WHAT’S IN THE PACK
OPERATION
- NOTE THE BLINDER 900 IS PACKAGED IN DEMO MODE.
- TO ENABLE FULL FUNCTION OF THE LIGHT, CONNECT IT TO A USB-C CHARGER.
POWER BUTTON
- LONG PRESS (2 SECS) – ON/OFF
- QUICK PRESS – CHANGE MODE
- DOUBLE PRESS – TOGGLE BETWEEN STEADY & FLASH MODES
- QUICK PRESS WHEN OFF TO CHECK BATTERY STATUS
CHARGING
- TO ACHIEVE OPTIMAL OPERATING LIFE FROM YOUR BATTERY, IT IS BEST TO CHARGE WITHIN A TEMPERATURE
- RANGE OF 15°C – 30°C (59°F – 86°F)
- IF THE TEMPERATURE DROPS BELOW 0°C OR ABOVE 45°C (BELOW 32°F OR ABOVE 113°F) CHARGING WILL BE SUSPENDED TO PROTECT THE BATTERY.
-
LIFT THE CHARGING PORT HATCH.
-
INSERT USB TYPE-C CHARGING CABLE.
-
ONCE THE CHARGE CABLE IS INSERTED, THE POWER BUTTON WILL GLOW AMBER INDICATING THE LIGHT IS NOW IN CHARGING MODE.
-
ONCE FULLY CHARGED, THE POWER BUTTON WILL GLOW GREEN.
-
AFTER 1 MINUTE THE GREEN LIGHT WILL TURN OFF.
BATTERY STATUS
- A QUICK PRESS OF THE POWER BUTTON WHEN THE LIGHT IS SWITCHED OFF WILL INDICATE THE BATTERY STATUS.
- WHEN THE POWER BUTTON LIGHT IS FLASHING RED, THE LIGHT’S OUTPUT WILL BE REDUCED TO 30% TO PRESERVE RUNTIME.
MOUNTING
BAR MOUNT
- SELECT THE CORRESPONDING HOLE TO SUIT YOUR BAR DIAMETER.
- FIRMLY HOLD THE MOUNT IN PLACE & STRETCH THE STRAP DOWNWARDS.
- THEN PULL THE STRAP AROUND THE BAR & SECURE ON THE HOOK.
- PLACE THE LIGHT IN THE CRADLE
- COMPLETE MOUNTING BY PULLING UP ON THE TAB WHILE APPLYING DOWNWARD PRESSURE TO CLICK THE LIGHT INTO POSITION.
- MAKE SURE THE LIGHT IS SECURE BEFORE RIDING!
- TO REMOVE, PRESS DOWN ON THE TAB & GENTLY PULL THE LIGHT AWAY FROM THE CRADLE.
UNDER MOUNT
-
PLACE THE LIGHT INSIDE THE MOUNT IN THE UN-LOCKED POSTION.
-
LOCK THE UNDER-MOUNT.
MAKE SURE THE UNDER-MOUNT IS LOCKED BEFORE RIDING.
DO NOT RIDE WITH THE UNDER-MOUNT UNLOCKED!
- REFER TO YOUR GO-PRO OR COMPUTER MOUNT INSTRUCTIONS TO COMPLETE BLINDER UNDER-MOUNT INSTALLATION.
MODE RUNTIMES
DESIGNED BY KNOG MELBOURNE AUSTRALIA 2-YEAR WARRANTY KNOG.COM.