HONG KONG EBPEC78 Bluetooth Headset for Smartphone Instruction Manual

HONG KONG EBPEC78 Bluetooth Headset for Smartphone

Product Information

Specifications:

• Product: Bluetooth headset for smartphone
• Colour: Black
• Compliance: FCC Part 15
• RF Exposure: Meets general RF exposure requirements

Product Usage Instructions

Pairing the Bluetooth Headset with your Smartphone:
To pair the headset with your smartphone, follow these steps:

1. Turn on the Bluetooth headset by pressing and holding the power button until you see the indicator light flashing.
2. On your smartphone, go to the Bluetooth settings and scan for available devices.
3. Select the Bluetooth headset from the list of available devices to pair.
4. Once paired, you should hear a confirmation sound in the headset.

Making and Receiving Calls:

To make or receive calls using the Bluetooth headset:

1. To make a call, use the call button on the headset to dial the number.
2. To answer an incoming call, press the answer button on the headset.
3. To end a call, press the end call button.

Charging the Bluetooth Headset:

To charge the headset:

1. Connect the charging cable to the headset and a power source.
2. The indicator light will show that the headset is charging.
3. Once fully charged, the indicator light will turn off.

FAQ:

• Q: Is the Bluetooth headset compatible with all smartphones?
  A: The Bluetooth headset is compatible with most smartphones that support Bluetooth connectivity. However, it’s always recommended to check your smartphone’s compatibility before purchasing.

• Q: How long is the battery life of the Bluetooth headset?
  A: The battery life of the Bluetooth headset may vary depending on usage, but on average, it can last up to 8 hours of continuous talk time on a full charge.

Inside the Box

• Wireless Headset
• Micro USB
• User Guide

Press and hold the volume keys to alternate between languages

Features

• Charge Less Often
  Power-saving mode helps the headset conserve battery when not in use

• Light, Comfortable Fit
  Lightweight design and soft eartip let you put it on and forget you’re wearing it

• Clear, Quality Sound
  Enhanced sound clarity

• Power-Saving Mode
  Hibernation mode allows your headset’s battery to last

• Easy Setup
  Simply connect with your phone’s Bluetooth and you are ready to go

• Hours of Talk Time
  Talk with the confront of knowing your headset will last through conversation

• Volume Control
  External controls allow you to increase and decrease the volume of the headset

Product Specifications

• Bluetooth Version: 4.0 with EDR
• Operating Distance: 33 Ft
• Transmission power class: 2
• Charging Plug: A/C charger
• Music Streaming: Yes
• Multi-function Button On/Off: Yes
• Standard Bluetooth Features: Yes
• Standby Time (hrs): 60
• Talk Time (hrs): 2.5
• Battery: Built-in rechargeable li-ion polymer battery
• Charging Time (hrs): 1.5
• Charger Power Input: 110-240 V AC
• Charger Power Output: 5V DC
• Supported Profiles: Headset A2DP, Handsfree
• Paired Name: #02362

Distributed by MobilEssentials

Please protect the environment. Do not abandon.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>