HONG KONG YS01 Bone Conduction Bluetooth Headset User Manual
- May 15, 2024
- HONG KONG
Table of Contents
HONG KONG YS01 Bone Conduction Bluetooth Headset
Pairing
- The headset boot automatically enters the Bluetooth pairing mode of the mobile phone.
- Alternating red and blue lights flashing
Multifunctional Button
-
Play/pause the music
- Click the multifunctional button
-
Next song
- Long press the +’ button for seconds
-
Previous song
- Long press the – button for seconds
-
Answer call
- Click the multifunction button
-
Switching telephone
- Press the multifunction button once during a call
-
Reject calls
- Long press the multifunctional button for seconds
-
IOS:
- Press the multifunctional button three times
-
Google:
- Press the multifunctional button three times
-
Redial call
- Double-click on the multifunctional button
Special function operation
During a call
Hang up on A and pick up on B:Long press the multifunction button for seconds
Indicators corresponding to each state
- Charging: red light on
- Charging complete: Blue light on
- Low power: The red light blinks every three seconds
- Charger connected: Flash blue light twice every three seconds
- Charger disconnected: Alternating blue and red light flashing
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
ON/OFF
ON:
Turn off the headphones:
Long press the multifunctional button for 2 seconds, alternating red and blue lights flashing.
OFF :
Turn off the headphones:
Long press the multifunctional button for 3 seconds,the red light goes on and then fades.
Friendly Reminder
- When A device is playing music, the headphones are playing music from A device. When B device needs to play music, it needs to pause A device’s playback first, and then play B device. During this process, different devices will have a delay of 1-10 seconds before B device will start playing
- Special tips for charging bone conduction earphones: After the product is automatically turned off after use, if it is not used for a long time, it needs to be recharged for about 1 hour before the indicator lights up. This is not because the product has malfunctioned, but because it has not been used for a long time and the battery has been effectively protected. Please rest assured to use it!
Specification
- Product Name: Bone Conduction Bluetooth
- Product Brand: SAM&JOHNNY
- Product Model: Sam&Johnny YS01
- Bluetooth Version: V5.2
FCC ID: PWK-YS01
- Company Name: HONG KONG NATURAL SOUND ELECTRONICS LIMITED
- Company Address: FLAT / RM M 4/F CONTINENTAL MANSION 300KING’S ROAD HONG KONG
Storage and maintenance
- Store the headphones in a cool,dry place. The working temperature should be 0-45°C(32~113°F). Working in a cold/hot environment,a highly humid area,or an extremely low air pressure may reduce the battery life.
- Keep the produce away from heat sources, direct sunlight, combustible gas or other liquids.
- Keeping the charging port dry before connecting to the charger will reduce the risk of damage.
- These headphones are water-resistant but are not waterproof. Please do not submerse the headphones in water.
- Clean the headphones with a soft dry cloth.
- Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.
- After storage for a long period, please charge the headphones before using them again.
Note
Design and specification are subject to change without notice. For the most up-to-date production information, please visit https://www.samjohnny.net
Hearing Loss distorted.
Listening with headphones at a high volume may affect your hearing and the audio will be destroyed
WEEE Declaration of Conformity
This WEEE logo means that this product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources,human health and the environment.For more information on the disposal and recycling of this product, contact your local municipality, disposal service,or the shop where you bought this product.
Manufacturer Declarations
Warranty: Natural Sound gives a warranty of 12 months on this product. For the current warranty conditions, please visit our website at https://www.samjohnny.net/ or contact your Shokz partner. Before putting the product into operation,please observe the respective country-specific regulations.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>