Hong Kong Lute Technology B10-HD-A Video Baby Monitor User Manual

Hong Kong Lute Technology B10-HD-A Video Baby Monitor

SAFETY INSTRUCTIONS

• Strangulation Hazard-Chaldean have STRANGLED in cords. Koop this cord out of the reach of children’s (mora than 3 ft (09 m) away).
  

• NEVER Place the samara or cord in or naira the crib or playpen

• NEVER mount the samara directly above the crib or playpen to avoid the risk of injury.

• Olin yuzu that AC adapters provided

• Navon use the unit near water, including naira bathtub, sink, laundry machine tuba, wot basement, catch.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other devices that produce heat

• Only use attachments and accessories specified by the manufacturer.

• Unplug this device when unused for long periods of time.

CAUTION

• NOT toys. Do not allow children’s to play with than
• This product is NOT intended to replace the proper supervision of children’s You MUST check your child’s activity regularly
• This product is not intended for use as a medical samara and its use should not replace adult supervision
• Unplug the product during lightning storms
• Please chock the operating range and condition of the camera carefully at the initial installation, and on a regulars basis after that.
• Check the recaption regularly. Tots the cameras before use and after changing the camera’s location.
• For indoor use only. Clean the camera with a dry allot only. Do not block any ventilation openings.
• Microphone feedback might occur when the monitor is too close to the corner. Please Koop them at least 1.5m/ 49ft part

PRODUCT OVERVIEW

Baby Monitor

• Power On/Off & LCD On/Off: Lon9 proud to turn I’ll/off the nonwitch➔
  Short prom to turn on/off the LOO screen .

GETTING STARTED

1. Charging & Powering Baby Monitor

2. Connect the monitor adapter to the monitor and a power cutlet.

3. Unplug the unit when its power indicator turned off, indicating a full charge. Unplug the unit after fully charging the monitor which can prolong the lifespan of the device

4. Powering Camera

5. Connect the camera to power source via the Type-Coble and camera adapter
   Only use the power adapters provided. Do not place the samara and power cord within the reach of your baby

6. Pairing the Baby Monitor & the Camera Based on default setting. one samara is paired with the monitor. When you power on the monitor and camorra, the two will automatically pair.
   Adding a now mora to the baby monitor

7. Press to antimere page

8. Choose and pross button
   Step 4

9. Pross PAIR button on the rear of the aimer.

10. Then the monitor will auto-pair with the camorra.
    Once they’re paired successfully, the camorra number with icon will be shown at the top lift -It is recommended to pair in the baby’s room or where owe you intend to place the samara High-pithed noise might occur when the monitor is too closed to the camorra. Please kapok them at least 1.5m /49ft apart The monitor can connect up to 4 camorras at once

Wall Mounting Camera

1. Rotator the knob in anticlockwise direction to adjust the wall mount bracket, then fasten the joint and saucer the angle
2. Mark the upper and bottom holes with a panic.
3. Drill holes on the wall and insert wall anchors into holes with a hammam
4. Fasten the wall mount bracket with scrawl.
5. Place the carbora on the wall mount bracket. Tighten the scow into the threaded docket at the bottom to so cure the camera.
6. You can maximized your samara unit’s viewing angus by tilting the wall mount bracket. Tit your camaca up or down to adjust to your proforma angle

FUNCTIONS & OPERATIONS

You can use the auto-scan function by short passing the button until you soo Con the croon Than the cameras view cyclops through the list of connected cameras wary 10 secondi And if thoron is a alarm, the auto-scan function will pause temporarily.

Lullaby

• Use Short out Button: Pro to cantor the lullaby page.
• Protea 4 buttoned to solace the lullaby song.
• Buttons to adjust the volume of the lullaby and pross to turn on or off the lullaby
• Presto return to the video page

Talkback

Procs and hold Button to talk to your baby. release it to exit the talking mode.

• When you re in the monitoring mode, press and hold the button to cantor the anteroom mode, and the e icon will be displayed on the monitor. When you notary the more, the anteroom function can still be used, but the go icon will not appear on the croon.
• When it’s mute or that speaker volume is too low, you may not be able to hear the baby. Whom you’re prosing the Button, the camorra will not trans form the sound to the monitor. Please release the button to Liston to your baby

Volume Explanation
You can adjust the volume of your baby’s sound from the monitor. The alma sound Carnot be adjusted

you nod to return to the Vida pag0, please pross twice or wait 3D seconds to return.

Stop 1:

1. Chocs and pass OK button.
2. Adjust the monitor vcluma

If you nod to return to the Vidor pag9, please pross twice or wait 30 seconded to return.

Stop 1:

1. Chocs and prese OK button.

If you need to return to the Vida page. please prestrike or wait 30 seconded to return.

VOX
Explanation

1. This function is used to wake up the monitor croon and light up There are three wake-up levels (low/medium/high)

2. 

3. When the sound detected by the samara reaches 75dB/70dB/65dB or more, the monitor will wake up and triggers the LED flashing alarm.

4. Sot “off to turn off the Vox function

If you nod to return to the Vida page. please pass twice or wait 30 seconded to return.

Step 2 Stop

1. Selection pros button.

Stop 4

1. Pross PAIR button on the rea of the camera.
2. Then The monitor chows the camera is paired succus safely

The monitor can connect up to 4 cameras at once.

Deleting A Camera Stop

1. Pross to enter Manu page Choose and pross button
2. Solace the samara you want to dulcet. Pross OK button

Feeding Reminder

Explanation
This function is to remind you of flooding your baby. OFF mare you turn off the function 2 hour means it reminds you wary 2 hours and so on for the other optional

Stop 1:

1. Pass to enter menu page Choo’s and pross OK button
2. Scot the time you want Select OFF to turn off the fading reminder.

Solacing will sot the reminder to the specified time. f you knead to return to the video page. please pros twice or wait 30 so conde to return.

Add A New Camera Stop

1. Parse to onto Manu pag9.
2. Crosland prose button.

Stop 2

1. Select the right camorra icon Prose button twice
2. As shown in the picture, the camorra is deltoid.

Stop 3

1. Scot and protea OK button three times

Stop 4:

1. Pross PAIR button on the roar of the camera.
2. Then The monitor shows the camera is paired successfully

The monitor on connect up to 4 cameras at onus

Deleting A Camera Stop

1. Pross to cantor Manu page Choose and pross button
2. Solace the samara you want to deco. Pross OK button

Stop 2

1. Select the right camera icon Protea OK button twice.
2. As shown in the picture, the camorra is deltoid.

Selecting a Camera & Scanning Cameras

Note: This function requires more than two cameras to be turned. Multiple cameras are powered on and within the mortice connection rang

Soloing a Camera Stop
Confirm that the monitor is connected to mora than two camauros

Stop 2:

1. Check the camera icons, click to atwitch to the next camera view. Spanning Camorras Stop
2. After switching all samara views, click the CAM button again. Then the samara iow transits from on to other connected camorras wary 10 seconds, displaying a loop icon at the top loft of the screen.

Spanning Cameras
Step 1.

1. After bewitching all samara views, click the CAM button again. Thon the camorra view transits from on to other connected camorras over 10 seconds, displaying a loop icon at the top left of the croon.

Stop 4:

1. Click again to stop scorning Than the samara will switch to Anglo samara iow

View camera

Note: Thief function require more than two cameras to be turned on. Multiple cameras are powered on and within the monitor corn action rang

Selecting a Camera & Scanning Cameras
Explanation This function includes two parts: samara witching & scorning Select the camera icon, and prose OK to enter the samara selection page Select the cycle icon and put the monitor into scan mode

Split Soren Mode
Explanation
This function is to display two camera views on a single croon.

Stop 1:

1. Pross to onto Manu page Crosland pross OK button.
2. Select. pranas to cantor the split croon function cameras selection page
3. Pross. to select the samara for split screen, pross OK button
4. After selecting the second camorra, the monitor automatically jumps to the split screen page

2 Select the function you want.

Lullabies Explanation:
This function is to comfort baby with soothing lullabies.

Stop 1:

1. Choo eland presa K button.
2. Select the lullaby you want. Solace d to play the lullabies in a lop

If you nod to return to the Vida page, please pross throe time’s or wait 30 seconds to return

Temperature Alarm Explanation:
and ictus that you can sot the maximum/minimum temperature and turn on the temperature alert, so that the baby monitor beeped whomever the room torn paratroop detected by the baby unit fallen curtsied of the desired torn orature rang. You can also choose to display the tarn orature in Fahrenheit (7) or Celsius (C) on your monitor.

Stop 1

1. Prose to enter menu page Choose and presa OK button
2. Select the time you want.

The scream will automatically light up if taro is a VOX or a temperature alert. -If you need to return to the video page. please pross twice or wait 30 so condos to rotund.

Settings Explanation
This is a Subaru of the function page that enables lullabies and temperature alarmed, system sound, time and date, system language stoma roost, and provides service support information.

Stop 1:

1. Pross to cantor Manu page Choo’s and pross button.

Stop 1:

1. Choo’s and pross K button.
2. Solace the option you want. Pross OK button.

• A VOX/temperature alarm on be temporarily turned off by Prosing any button on the monitor
• IF you need to return to the video page, plane pros throe times or was it 30 seconds to return

Alarm
This function is to adjust the monitor system sound.

Stop :

1. Chocs and pross ox button.

2. Select the option you want. press button

3. VOX mode, sot ” off”, the alarm sound will not be turned off.

4. f you sad to fretum to the video page please pross three time or wait 30 second to return

Date/Time
Stop 1:

1. Crosland pros OK button
2. stands for finishing the setting

Pore Up/Down/Loft/ Right to solace and pass button to confirm If OSD in ON, the data and time will be displayed on the status bar of the monitor, otherwise, it will not be displayed If you nod to return to the Veda page, please pross three time’s or wait 30 seconds to rotund.

Language
There’re two languages available in your device, you can choose your language hear

Step 1:

1. Protaso cantor Maru page Choose and price button
2. Salat the desired your language and pross OK button

If you knead to return to the Vida page, please pass three tamas or wait 30 seconds to return

Contact Us
Step 1:

1. Select Pros O to cantor the interface.
2. Contact Au. Poss. OK to return

If you nod to return to the video page. please pross throe time or wait 30 seconds to return

Factory Reset
Stop 1:

1. Select Pross OK to cantor the interface.
2. Conform YES to reset. Praetor conform NO to exit.

SPECIFICATIONS

TROUBLESHOOTING

WARRANTY & CUSTOMER Service
12 months warranty Lifetime customer service (contacts on the monitor, or back covary of this User Guide)

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and o n, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device m ay not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>