QUAD LOCK 360 Suction Base Instructions
- June 1, 2024
- QUAD LOCK
Table of Contents
QUAD LOCK 360 Suction Base
Instructions for Suction Base Assembly
The diagram illustrates the assembly instructions for a suction base. Below are the steps described in the image:
Specifications
| Component | Description |
|---|---|
| BASE | The base of the device that will be attached to a surface using suction. |
| Suction Lever | Lever used to create suction and secure the base to a surface. |
| Locking Cogs | Circular components that lock the lever in place. |
Assembly Instructions
- Position the BASE on the desired surface.
- Press down on the BASE firmly to ensure it is flat and secure.
- Rotate the suction lever downwards to create suction and lock the BASE in place.
BASE SUCTION BASE
Additional Information
The diagram shows a hand pressing down on the BASE. Circular locking cogs are
visible, indicating where the suction lever will engage. A symbol with a
clockwise arrow indicates the direction in which the suction lever should be
rotated to create the suction necessary to secure the BASE.
The bottom part of the image includes an icon indicating the manual,
represented by a book and a wrench, suggesting that further instructions or
tools may be available for the assembly or maintenance of the product.
Additionally, there is a symbol representing a trash bin crossed out,
indicating that the product should not be disposed of with regular waste,
likely due to recycling or special disposal requirements for its components.
FAQ
How do I know if the BASE is properly secured?
Ensure the BASE is flat against the surface and the suction lever is fully rotated downwards, locking the cogs in place.
Can the suction base be repositioned?
Yes, to reposition the suction base, lift the suction lever to release the suction, move the base to the new location, and follow the assembly instructions again.
What surfaces are suitable for the suction base?
The suction base works best on smooth, non-porous surfaces that are clean and dry.