QUAD LOCK 2203-054 Vent Mount Car Instruction Manual
- June 15, 2024
- QUAD LOCK
Table of Contents
- QUAD LOCK 2203-054 Vent Mount Car
- Product Information
- Product Usage Instructions
- ATTACHING TO VENT
- ADJUST ANGLE
- COMPATIBLE VENTS
- INCOMPATIBLE VENTS
- REPLACING THE TOP CAP WITH A 360™ COMPATIBLE HEAD
- CHANGING THE HOOK OR HEAD ORIENTATION
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
QUAD LOCK 2203-054 Vent Mount Car
Product Information
Specifications:
- Product Name: Car Vent Mount
- Compatibility: 360TM compatible head
- Vent Compatibility: Vents with 10mm to 32mm spacing and 3-level fins
- Tightening Torque: Maximum 3Nm
Product Usage Instructions
Mounting:
- Identify a vent in your vehicle with 10mm to 32mm spacing and 3-level fins.
- Brace the Vent Mount against the 3 level fins of the vent.
- Ensure that the back of the mount does not interact with the vent housing (shown in grey).
- Make sure that the mount does not interfere with essential vehicle operations such as steering, braking, or airbags.
Adjusting Angle (Optional):
- Loosen the top cap or nut of the mount.
- Rotate the mount to adjust the angle as desired.
- Tighten the top cap or nut to secure the mount at the desired angle.
- Ensure no additional force is applied to the vent when tightening the nut or screw.
Replacing the Top Cap with a 360TM Compatible Head:
- Loosen the top cap of the mount.
- Remove the top cap.
- Attach a 360TM-compatible head to the mount.
- Tighten the top cap to secure the compatible head in place.
- Ensure no additional force is applied to the vent when tightening the nut.
Changing the Hook or Head Orientation (Optional):
- If the hook is not aligned to the vent, pull the hook to remove it from the mount.
- Rotate the hook 90 degrees.
- Mount the hook back onto the mount.
- Ensure that the mounting position does not interfere with vehicle operation.
Frequently Asked Questions (FAQ)
-
Q: What vents are compatible with the Car Vent Mount?
A: The Car Vent Mount is compatible with vents that have 10mm to 32mm spacing and 3-level fins. -
Q: How much torque should I apply when tightening the mount?
A: The maximum tightening torque should not exceed 3Nm. -
Q: Can I adjust the angle of the mount?
A: Yes, you can adjust the angle of the mount by loosening the top cap or nut, rotating the mount, and then tightening it again. -
Q: Can I replace the top cap with a different head?
A: Yes, you can replace the top cap with a 360TM-compatible head. Loosen the top cap, remove it, attach the compatible head, and then tighten the top cap again. -
Q: How can I change the hook or head orientation?
A: If the hook is not aligned to the vent, pull it to remove it from the mount. Rotate it 90 degrees and then mount it back onto the mount. Make sure that the mounting position does not interfere with vehicle operation.
ATTACHING TO VENT
Please ensure the back of the mount does not interact with the vent housing (shown in grey).
Ensure the mount doesn’t interfere with essential vehicle operation (steering, braking, airbags etc).
ADJUST ANGLE
Ensure no additional force is applied on the vent when tightening the nut
COMPATIBLE VENTS
INCOMPATIBLE VENTS
REPLACING THE TOP CAP WITH A 360™ COMPATIBLE HEAD
Ensure no additional force is applied to the vent when tightening the screw.
CHANGING THE HOOK OR HEAD ORIENTATION
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>