QUAD LOCK QLO Series Wireless Charging Module Installation Guide

QUAD LOCK QLO Series Wireless Charging Module Installation Guide

WIRELESS CHARGING MODULE

**CABLE INSTALLATION

**

• Wireless Charging Module and Cable from Quad Lock

• From regulated accessory power supply with suitable overcurrent protection
  less than 100W

• Power and cabling from e-bike drive system (varies per manufacturer)
  

PUCK INSTALLATION

Follow neccessary precautions to avoid electrical shock

NOTE: This product must be professionally installed by an authorised assembly plant or service centre. Any installation by un-authorised parties will void the product warranty

EXAMPLE WIRING CONFIGURATIONS’

1. MID DRIVE MOTOR
   

2. HUB MOTOR
   

3. CONNECT AT STEM
   

TROUBLESHOOTING

1. Is the Drive System OK?
2. Is the Power on?
3. Is the Battery charged?
4. Check 12V power at Connector
5. Replace Cable
6. Replace Charging Module

Follow neccessary precautions to avoid electrical shock

TECHNICAL SPECIFICATIONS

10W Fast Charging Google : Up to 15W Fast Charging Huawei : Up to 15W Fast Charging| Apple : Up to 7.5W Fast Charging Samsung : Up to 7.5W Fast Charging Google : Up to 7.5W Fast Charging Huawei : Up to 7.5W Fast Charging
Electronics Protection| Reverse polarity protection Overvoltage/Undervoltage protection Overcurrent protectionTransient spike protection Overtemperature protection – 2-stageForeign Object Protection (FOD) – detects presence of metal objects in proximityabove charger and limits power output from coil to prevent overheating
Certification|
Water resistance| IP67
Dimensions|
Right-Angle Cable

Vertical Cable

Product Weight (kg)| 0.080 kg

DEVICE COMPATIBILITY

All devices must be using a dedicated Quad Lock Case (Original or MAG) to ensure optimal charging and mounting experience.

WIRELESS CHARGING FUNCTIONALITY IS NOT COMPATIBLE WITH QUAD LOCK UNIVERSAL ADAPTORS

CERTIFICATION

Annex products Pty Ltd, Australia, declares that the radio equipment type QL-6585 and QL-6416 is in compliance with RED Directive (2014/53/

EU).
The CE certificate of conformity can be found at: www.quadlock.com.au/compliance

Annex products Pty Ltd, Australia, declares that the radio equipment type QL-6585 and QL-6416 is in compliance with the following Directives: Radio Equipment Regulations 2017.
The certificate of conformity can be found at:
www.quadlock.com.au/compliance

INDUSTRIE CANADA (IC: 27134-QLO2)
IC Caution:
This device contains licence-exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement :
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device has been evaluated to meet general RF exposure requirement.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and a human body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>