QUAD LOCK BASE 360 Base Flexible Adhesive Instructions
- May 15, 2024
- QUAD LOCK
Table of Contents
QUAD LOCK BASE 360 Base Flexible Adhesive
Product Information
This product is a flexible adhesive mount designed for attaching items to
various surfaces.
Specifications
- Mount Type: Flexible Adhesive
- Surface Compatibility: Various surfaces
- Installation: Peel-and-stick
- Bond Strength: Full bond strength achieved after 24 hours
Installation
- Clean the mounting surface with the provided isopropyl alcohol cleaning wipe.
- Bend tabs to match the profile of the mounting surface before attaching.
- Peel off the adhesive backing and position the mount onto the surface. Apply even pressure by firmly pressing down for 30-60 seconds.
- Full bond strength is achieved after 24hrs.
Dimension
To suit small mounting areas, we recommend cutting no more than two tabs along the bend lines, which must ONLY be from the opposite side.
Surface Preparation
Before mounting, clean the mounting surface using the provided isopropyl
alcohol cleaning wipe to ensure a clean and dry surface for optimal adhesion.
Tab Preparation
Bend the tabs of the mount to match the profile of the mounting surface
before attaching. This step helps ensure a proper fit.
Mounting Process
Peel off the adhesive backing from the mount and carefully position it onto
the prepared surface. Apply even pressure by firmly pressing down on the mount
for 30-60 seconds to secure it in place. Please note that full bond strength
is achieved after 24 hours of mounting.
Note
For small mounting areas, it is recommended to cut no more than two tabs
along the bend lines, which must ONLY be from the opposite side to maintain
the integrity of the mount.