QUAD LOCK QL-5289 OEM Wireless Charger Instruction Manual

QUAD LOCK QL-5289 OEM Wireless Charger

Product Information

The wireless charging module is a Quad Lock product that allows you to charge your smartphone wirelessly while riding your e-bike. The charging module comes with a cable and requires a regulated accessory power supply with suitable overcurrent protection. The puck must be installed with the necessary precautions to avoid electrical shock.
The product has technical specifications that include input voltage, input current, input connection, output power, operating temperature, operating frequency, efficiency, standby current, and phone charging. The product is compatible with specific devices mentioned in the manual that must be using a dedicated Quad LockCase (Original or MAG) to ensure optimal charging and mounting experience. The product has a water resistance of IP67 and has been certified to comply with RED Directive (2014/53/EU), EMC Directive (2014/30/EU), CE-LVD Directive (2014/35/ EU), and EN 50498.

Product Usage Instructions

1. The product must be professionally installed by an authorized assembly plant or service center. The unauthorized installation will void the product warranty.

2. Cable Installation: Tighten the wireless charging module and cable from Quad Lock with 0.2Nm torque from the regulated accessory power supply with suitable overcurrent protection. Power and cabling from the e-bike drive system vary per manufacturer.

3. Puck Installation: Follow necessary precautions to avoid electrical shock and tighten the puck with 1Nm torque.

4. Example Wiring Configurations: Connect the Quad Lock module to the 12V accessory port or Quad Lock 12V power module. For the mid-drive motor, hub motor, or connect at the stem, follow the necessary wiring
   configurations mentioned in the manual.

5. Troubleshooting: If you face any issues with the product, check the drive system, power, battery charge, and 12V power at the connector, follow the manual and replace the cable or charging module if needed.

CABLE INSTALLATION

PUCK INSTALLATION

Follow necessary precautions to avoid electrical shock

NOTE : This product must be professionally installed by an authorized assembly plant or service centre. Any installation by un-authorised parties will void the product warranty.

EXAMPLE WIRING CONFIGURATIONS

1. MID DRIVE MOTOR
2. HUB MOTOR
3. CONNECT AT STEM

TROUBLESHOOTING

1. Is the Drive System OK?

2. Is the Power on?

3. Is the Battery charged?
   Check the drive system manual and resolve any issues

4. Check 12V power at Connector

5. Replace Cable

6. Replace Charging Module

TECHNICAL SPECIFICATIONS

12V 1.0A Input
Input Voltage| 12V DC| 12V DC
Input Current| 1.8A Max @12V| 1.0A Max @12V
Input Connection| 2-wire – GND, +12V| 2-wire – GND, +12V
Output Power| 5W / 7.5W / 10W / 15W| 5W / 7.5W
Operating Temperature| -10°C to +40°C at RH £ 95%
Operating frequency| 105Khz~205Khz.
Efficiency| Up to 75%-80% at maximum load (15W output) @ +23°C ambient
Standby Current| 40mA
Phone Charging| Apple : Up to 7.5W Fast Charging Samsung : Up to 10W Fast Charging Google : Up to 15W Fast Charging Huawei : Up to 15W Fast Charging| Apple : Up to 7.5W Fast Charging Samsung : Up to 7.5W Fast Charging Google : Up to 7.5W Fast Charging Huawei : Up to 7.5W Fast Charging
Electronics Protection| Reverse polarity protection Overvoltage/Undervoltage protection Overcurrent protection

Transient spike protection Overtemperature protection – 2-stage

Foreign Object Protection (FOD) – detects presence of metal objects in proximity

above charger and limits power output from coil to prevent overheating

Certification|
Water resistance| IP67
Dimensions|
Product Weight (kg)| 0.080 kg

DEVICE COMPATIBILITY

All devices must be using a dedicated Quad Lock Case (Original or MAG) to ensure optimal charging and mounting experience. (As at March 2023).

APPLE

• iPhone 14 Pro
• iPhone 14 Pro Max
• iPhone 14
• iPhone 14 Plus
• iPhone 13 Pro
• iPhone 13 Pro Max
• iPhone 13
• iPhone 13 mini
• iPhone SE (3rd Gen)
• iPhone 12 Pro
• iPhone 12 Pro Max
• iPhone 12
• iPhone 12 mini
• iPhone 11 Pro
• iPhone 11 Pro Max
• iPhone 11
• iPhone SE (2nd Gen)
• iPhone XS
• iPhone XS Max
• iPhone XR
• iPhone X
• iPhone 8
• iPhone 8 Plus

SAMSUNG

• Galaxy S23
• Galaxy S23+
• Galaxy S23 Ultra
• Galaxy S22
• Galaxy S22+
• Galaxy S22 Ultra
• Galaxy S21 FE
• Galaxy S21
• Galaxy S21+
• Galaxy S21 Ultra
• Galaxy Note20
• Galaxy Note20 Ultra
• Galaxy S20 FE
• Galaxy S20
• Galaxy S20+
• Galaxy S20 Ultra
• Galaxy Note10
• Galaxy Note10+
• Galaxy Note9
• Galaxy S10
• Galaxy S10+
• Galaxy S10e
• Galaxy S9
• Galaxy S9+
• Galaxy S8
• Galaxy S8+

GOOGLE

• Pixel 7
• Pixel 7 Pro
• Pixel 6
• Pixel 6 Pro
• PIxel 5
• Pixel 4
• Pixel 4XL
• Pixel 3
• Pixel 3 XL

HUAWEI

• Huawei P40 Pro
• Huawei P30 Pro

WIRELESS CHARGING FUNCTIONALITY IS NOT COMPATIBLE WITH QUAD LOCK UNIVERSAL ADAPTORS

CERTIFICATION

• Annex Products Pty Ltd, Australia, declares that the product “OEM Wireless Charger 12V” is in compliance with RED Directive (2014/53/EU), EMC Directive (2014/30/EU), CE-LVD Directive (2014/35/ EU) and EN 50498. The CE certificate of conformity can be found at: www.quadlock.com.au/compliance
• Annex Products Pty Ltd, Australia, declares that the product “OEM Wireless Charger 12V” is in compliance with the following Directives: Radio Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restrictions of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment 2012. The certificate of conformity can be found at: www.quadlock.com.au/compliance

INDUSTRIE CANADA (IC: 27134-QLO)

IC Caution

This device contains license-exempt transmitter(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. this device may not cause interference,
2. this device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a the minimum distance of 20 cm between the radiator and the human body.

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and the human body.

References

• Quad Lock Smartphone Mounting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>