MEAN WELL HRP-100 series Switching Power Supply Owner’s Manual

: June 1, 2024
: MEAN WELL

Table of Contents

MEAN WELL HRP-100 series Switching Power Supply
Product Information
Product Usage Instructions
Features
SPECIFICATION
Mechanical Specification
Block Diagram
Documents / Resources

MEAN WELL HRP-100 series Switching Power Supply

Product Information

Specifications:

Model: HRP-100 series
Power Output: 100W
Input: Universal AC input / Full range
Active PFC Function : Yes
Efficiency: Up to 90%
Surge Input : Withstand 300VAC for 5 seconds
Protections: Short circuit, Overload, Over voltage
Cooling: Free air convection
Profile: 1U low profile 38mm
Remote Control : Built-in ON-OFF control
No Load Power Consumption : 0.95/230VAC PF>0.98/115VAC at full load

Product Usage Instructions

Installation:

Ensure the power supply is disconnected before installation. Mount the HRP-100 series power supply in a well-ventilated area with sufficient space for air convection.

Connection:

Connect the input terminals to a universal AC power source. Make sure the connections are secure and follow the correct polarity.

Operation:

Once connected, turn on the power supply using the built-in remote ON-OFF control. Monitor the device for proper functionality.

Maintenance:

Regularly inspect the power supply for any dust buildup or obstructions to airflow. Clean the unit as needed to ensure optimal performance.

FAQ

Q: What should I do if the power supply overheats?
- A: If the power supply overheats, immediately disconnect it from the power source and allow it to cool down before attempting to use it again. Check for any obstructions to airflow.
Q: Can I use the HRP-100 series for outdoor applications?
- A: It is recommended to use the power supply in indoor environments with proper ventilation to prevent exposure to moisture or extreme weather conditions.

Features

Universal AC input / Full range
Built-in active PFC function
High efficiency up to 90%
Withstand 300VAC surge input for 5 seconds
Protections: Short circuit / Overload / Over voltage
Protections : Over temperature (optional)
Cooling by free air convection
1U low profile 38mm
Built-in remote ON-OFF control
No load power consumption<0.5W
All using 105°C long life electrolytic capacitors 5 years of warranty

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

SPECIFICATION

MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG 7

$MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG $6$$

Mechanical Specification

$MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG $2$$

Block Diagram

$MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG $3$$

Derating Curve

$MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG $4$$

Output Derating VS Input Voltage

$MEAN-WELL-HRP-100-series-Switching-Power-Supply-FIG $5$$

Documents / Resources

| MEAN WELL HRP-100 series Switching Power Supply [pdf] Owner's Manual
HRP-100 series Switching Power Supply, HRP-100 series, Switching Power Supply, Power Supply, Supply
---|---