audioengine HD6 Premium Home Music System User Guide
- June 5, 2024
- audioengine
Table of Contents
audioengine HD6 Premium Home Music System
Welcome to the Audioengine tamily and congratulations on your purchase of the Audioengine® HD6 Premium Home Music System! The Audioengine team is dedicated to bringing you the highest-quality listening experience possible and the Audioengine HD6 was designed with the same attention to detail and operational simplicity as all other Audioengine products. As with our other past efforts we thank our customers, distributors and resellers for all the inspiration to create another great product.
What’s in the box
- HD6 powered (left) speaker
- HD6 passive (right) speaker
- Magnetic speaker grills
- Bluetooth antenna
- Remote control
- Speaker wire (16AWG), 3.75 meters (~12.3ft)
- AC power cord
- Mini-jack audio cable, 2 meters (-6.5 feet)
- RCA audio cable, 2 meters (-6.5 feet)
- Microfiber speaker bags
Features
- Built-in analog power amplitiers
- Bluetooth° with aptX HD°, extended range, & 24-bit upsampling DAC
- 24-bit digital optical TOSLINK input
- Dual analog inputs and variable audio output
- Hand-built cabinets and high-quality connectors
- Custom aramid fiber woofers and silk dome tweeters
- Remote control
- Detachable magnetic grills
Safety Instructions
- Please read these instructions before using this product.
- Keep these instructions for future reference.
- Heed all warnings on the product and in this guide.
- Follow all instructions.
- Do not use this apparatus near water or moisture.
- Clean only with a dry cloth and as directed by the manufacturer.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions,
- Do not install near any heat sources, such as radiators, heat registers, stoves or other apparatus that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or third prong are provided for your satety.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Use only attachments or accessories specitied by the manufacturer.
- Use only with the cart, stand, tripod, bracket or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Referall servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Quick Setup
-
Connect the included speaker wire from the HD6 left (powered) speaker to the right (passive) speaker.
-
Connect the Bluetooth antenna to the HD6 rear panel.
-
Connect the AC power cord to the HD6 rear panel and plug the other end into a power outlet.
Wireless connection -
Turn on the HD6 power switch located on the rear panel. HD6 will automatically go into Bluetooth “pair mode” and the Pair button on the HD6 rear panel will flash.
-
On your device (phone, tablet, laptop, etc), turn on Bluetooth and go to Bluetooth preferences
-
Select “Audioengine HD6” to pair and connect. The Pair indicator on the
HD6 rear panel should be solid.
Play your music and adjust volume levels on HD6 and your device. -
To add additional devices put HD6 back into pair mode by disconnecting HD6 from your device or by pressing and holding the Pair button on the HD6 rear panel until the pair indicator starts flashing. HD6 can wirelessly connect to only one device at a time, however, it will remember up to six different devices. Wired connection
-
Connect one of the included audio cables to your music player tablet, computer, TV, etc.) and the other end to an input on the HD6 rear panel. ohone,
-
Play your music and adjust the volume on the speakers and your device to the desired listening levels.
Inputs and volume settings
Multiple sources and devices may be connected to the speakers at the same time
and all inputs are open and active so it’s easy to switch between your tablet,
phone, TV, or any other device. To adjust the volume, we recommend you first
set a level on the HD6 and then use the volume control directly on your device
to adjust the overall level. Volume settings are flexible and there is no
right or wrong so feel free to experiment to find levels that work for you.
Optical input
The Toslink digital optical input on the HD6 rear panel can accept PCM stereo
streams from any optical source, such as a TV, computer, Apple TV,media
server, or any other product with an optical output. The HD6 includes built-in
power amplifiers so do not connect the HD6 speaker terminals directly to the
speaker outputs of a stereo receiver or amplifier.
Break-in period
Your HD6 speakers will sound great right out of the box and will sound even
better over time. However, it’s best to give them 40 to 50 hours “break-in
time” betore doing any critical listening
Cleaning
We don’t recommend using any solvents or cleaners on Audioengine cabinets or
speakers. Just wipe down with a soft, dry cloth. For additional setup
instructions and troubleshooting tips, go to:
audioengine.com
OVERVIEW
Remote Control
Other Features
Variable output
The HD6 includes a variable full-range preamp audio output so you can connect
a subwoofer, other Audioengine powered speakers or an Audioen- gine wireless
adapter to stream music to other systems around your house. This output is
variable (adjustable) so the volume level of the output can be controlled from
the HD6 front panel or remote control.
Stand mounting
Threaded 1/4″x 20 brass inserts are included on the bottom of each speaker
cabinet to provide the ability to attach the speakers to floor stands. These
inserts are not designed to support the full weight of the speakers and
therefore should not be used with single-point wall or ceiling mounts. It is
the customer’s responsibility to check with the speaker stand manufacturer to
determine whether that specific stand is capable of handling the weight and
proportions of these speakers in a safe and stable manner. TheCustomer is also
responsible for proper selection of mounting hardware not included with the
speaker and for proper assembly. Audioengine disclaims any liability for the
selection of suitable floor stands and/or correct hardware between the
selected stand and these speakers.
Extra tips, troubleshooting, FAQs and updates to this guide can be found on
our website: audioengine.com/support-inquiry
And if you have questions or need help, please contact our customer support
team: audioengine.com/support-inquiry
Product returns and refunds
We sincerely hope you get as much enjoyment from our products as we’ve had
Creating them. However, should you have an issue or are not satisfied with any
Audioengine product for any reason contact the reseller where you purchased or
contact us directly: support@audioengine.com
Speaker Placement
Although your HD6 speakers are very forgiving with regards to placement, it’s
true that proper speaker location can have an impact on sound quality. There
seem to be different theories on correct speaker placement but rooms and
tastes are different so it’s difficult to recommend a perfect setup. We do
suggest you feel free to experiment to see what works tor you. As a general
rule of thumb for the best soundstage and imaging, the speakers should be
equidistant from side walls and a different distance from rear walls. Tweeters
should be at about eye level in your most frequent listening location and for
the best bass response, we recommend at least 6 inches of clearance between
the rear of the speakers and the wall behind them.
As a general rule of thumb for the best soundstage and imaging, the speakers should be equidistant from side walls and a different distance from rear walls. Tweeters should be at about eye-level in your most frequent listening location and for the best bass response, we recommend at least 6 inches of clearance between the rear of the speakers and the wall behind them. Here are a tew more suggestions, assuming you have some flexibility regarding where you place your speakers. No need for concern if your situation and listening environment dictate the speakers’ position.Both speakers should be equidistant from your primary listening position. Placing the speakers at least 6 feet (1.8m) apart usually provides the best imaging Try to keep the speakers near the front edge of shelves or cabinets. Try to keep the speakers near the front edge of shelves or cabinets. Allow at least 6 inches of clearance between the rear of the speakers and the wall or surface behind them. If you need to turn the speakers on their sides, position the tweeters toward the outside. If used ona desktop for computer speakers, it’s best if they are placed on a solid surface.
Warranty information
All Audioengine products have a 3-year Limited Warranty on parts and labor from the date of purchase. The Limited Warranty applies only to Audioengine products sold in the United States. Your warranty is automatic, so there is no need to register. For Limited Warranty coverage elsewhere, please contact the Audioengine dealer, reseller, or distributor in your COuntry or region.
What is covered
All defective parts or faulty workmanship.
What is not covered
The Audioengine Limited Warranty does not cover damage caused by accident,
misuse, abuse, neglect, excessive moisture, lightning, power Surges, other
acts of nature, unauthorized product modification or repairs, or failure to
follow the instructions outlined in this guide.
What we will do
We will repair or replace any detective parts, at our option, within a
reasonable amount of time and free of charge any time during the warranty
period. After service, we will be responsible for shipping the product back to
you at our expense.
What we ask from you
You will be responsible for shipping charges to Audioengine or to an
authorized dealer. We recommend you keep the original shipping materials to
prevent shipping damage if service is needed. Audioengine cannot be
responsible for any damages incurred during shipping due to poor packing, so
please pack well and make sure to insure your shipment.
How to obtain Audioengine warranty service
lf you have any questions or teel you may need service, contact the reseller
where you purchased your product or visit our Support portal: audioengine.com
/support-inquiry And if you don’t find an answer to your question you can
easily contact us by opening a support ticket.
Exclusive remedy
This Limited Warranty is fully transterable provided the current owner
furnishes the proof of purchase and that the serial number on the product is
intact. THE MAXIMUM LIABILITY OF AUDIOEN- GINE SHALL NOT EXCEED THEACTUAL
PURCHASE PRICE PAID BY YOU FOR THE PRODUCT. IN NO EVENT SHALL AUDIOENGINE BE
LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES.
About Audioengine
Audioengine designs and builds innovative audio products with all your music
in mind. Great sound, simple but elegant designs, high-quality materials and
truly useful features are what Audioengine is about.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
FCC Part 15 Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to
the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment has been tested and found to comply with the Limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may Cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lit this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receive
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced technician for help.
Information for Users on Disposal of Old Equipment European Union This symbol indicates that electrical and electronic equipment should not be disposed as general household waste at its end of life. Instead, the product should be handed over to the applicable collection point for recycling in accordance with your national legislation. By disposing of this product correctly, you will help to conserve the environment and human health that could otherwise be caused by inappropriate waste handling of this product. For more information about the collection point and recycling of this product, please contact your household waste disposal service or the shop where you purchased the product. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. In other Countries outside the European Union lf you wish to dispose of this product, please do so in accordance with applicable national legislation or other rules in your country tor the treatment of old electrical and electronic equipment.
2022 Audioengine, LLC. All Rights Reserved.
Audioengine and Audioengine HD6 are trademarks of Audioengine. The Bluetooth
name and the Bluetooth trademarks are owned by Bluetooth SIG, Inc. and are
used by Audioengine under license. The aptx mark and logos are registered
trademarks of Qualcomm. The Bluetooth° word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>