RADLEY LONDON 10 Series Smart Watch User Guide
- June 17, 2024
- RADLEY LONDON
Table of Contents
- RADLEY LONDON 10 Series Smart Watch
- Product Usage Instructions
- getting started
- HOW TO CHARGE
- OPERATION INTRODUCTION
- DISCONNECTING YOUR SMART WATCH & PHONE
- CONNECTING BAND TO MOBILE PHONE
- SELECTING YOUR DISPLAY
- GPS CONNECTION
- HOW TO CARE FOR YOUR SMART WATCH
- STRAP CARE
- GUARANTEE
- IMPORTANT SAFETY INFORMATION
- DECLARATION OF CONFORMITY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
RADLEY LONDON 10 Series Smart Watch
Specifications:
- Bluetooth Version: 5.0
- Charging Time: 2 hours
- Compatibility: Check the website for an updated list of compatible smartphones
Product Usage Instructions
How to Charge:
- Charge the smartwatch when the battery is low.
- Open the charger case and place the watch head inside.
- Connect the USB cable metal pins with the metal point on the back of the bracelet until the charging icon appears.
- Close the case and plug the USB into a power source.
- A 2-hour charge is sufficient. Avoid overcharging.
Operation Introduction:
- Ensure Bluetooth is enabled on your smartphone.
- Download and install the RADLEY LONDON app.
- Follow the on-screen instructions to set up your profile and goals.
Selecting Your Display:
Access different dials by pressing the touch button. Choose a dial by
tapping through options on the smartwatch or app homepage.
Activity Tracking:
- Sleep: Wear the watch to bed between 9:00 p.m. and 9:00 a.m. Check sleep data by pressing the touch button.
- Messages: Unread messages can be viewed in the ‘Message’ interface by pressing the touch key.
- Sports Modes: Access different sports modes like Walking, Running, Cycling & Hiking by long-pressing the touch key. Stop recording sports data by long-pressing twice.
FAQ:
-
Q: How do I disconnect my smartwatch from my phone?
A: Open the RADLEY LONDON App on your smartphone, tap ‘disconnect device’ in settings, forget the device in your phone’s Bluetooth settings. -
Q: How do I switch between dials on my smartwatch?
A: Press the touch button to access the ‘more’ menu, then navigate to ‘dial switching’. Tap through options to select your desired dial, then hold the touch button to set it. -
Q: How can I view my sports data after recording?
A: You can check your sports data in the app after recording your activities using the smartwatch.
getting started
Please take a few minutes to read through these instructions, they will help
ensure you get the best from your smartwatch. You can also visit our website
or scan this QR code for lots of helpful information and video guides. And of
course, if you have any questions, please get in touch, we’re here to help!
+44 (0)121 524 1400
radleywatches@peershardy.co.uk
www.radley.co.uk/smart-watches-instructions/
HOW TO CHARGE
- Please charge your smartwatch when it displays low battery warning.
- Open the charger case and place the watch head into the case.
- Connect the metal pins of the USB cable with the metal point on the back of the bracelet until the charging icon appears on the screen.
- Close the case and plug the USB into the port or plug. Once the power charger is plugged in, the watch will activate automatically.
- A 2-hour charge time is sufficient to fully charge your smartwatch. Please take care to not overcharge.
OPERATION INTRODUCTION
- Press & hold the touch button for 3+ seconds to turn your smartwatch ON or OFF.
- You can also tap the POWER OFF icon within the menus, confirm your selection when prompted and your smartwatch will switch off.
DISCONNECTING YOUR SMART WATCH & PHONE
- Open the RADLEY LONDON App. on your smart phone.
- Tap disconnect device in Settings.
- Forget your device on your smart phones Bluetooth settings.
DOWNLOADING THE RADLEY LONDON App.
- To download our app, search for RADLEY LONDON App. or scan the appropriate QR code for installation. Use your smart phone camera or QR code reader app.
COMPATIBILITY
The RADLEY LONDON app will work on the following smartphones:
- Android (version 4.4 and above)
Apple IOS (version 8.0 and above)
Please ensure the app is the latest version and has Bluetooth 5.0
CONNECTING BAND TO MOBILE PHONE
- Enable Bluetooth on your smart phone.
- Open the RADLEY LONDON App. on your smart phone.
- Review and accept privacy policy.
- Set your profile following the steps presented.
- Set your goals following the steps presented.
- To connect your watch, tap the green icon & select your watch from the list.
- Tap OK to allow notifications to appear on your smartwatch.
SELECTING YOUR DISPLAY
- Your smartwatch has access to our signature dials, to switch between them press the touch button until the ‘more’ menu & hold the touch button to select the menu option. Press the touch button again through the options until the ‘dial switching’ option.
- Tap through the dial options and once you have selected your dial, hold the touch button to set. Alternatively, you can access your dials by tapping on the dial icon on the APP homepage.
ACTIVITY TRACKING
- Press the touch key repeatedly until Sports icon is displayed & long press the touch key to enter in the multi-sport mode. The smart watch has 4 sports modes: Walking, Running, Cycling & Hiking. Long press touch key to select and then enjoy your sport. The smart watch will record your data. After your sports, you can long press the touch key twice to stop recording and save the sports data. You can also check your sports data in the app. Note: If your exercise time is less than 5 minutes, the data will not be saved.
HEART RATE MONITOR
- View your current heart rate, and average walking, running, hiking and cycling rate. Your watch will continue to detect your heart rate as long as you wear it even when you sleep! Use the touch button until you select the Heart Rate icon. Hold the touch button until the icon changes to BPM. It will detect the current heart rate. If you want the feature to be active on selective times, then you select this by opening RADLEY LONDON App, selecting ‘Settings’ and ‘Advance Settings’. Select Heart rate and set the tone you wish the feature to be active.
SLEEP
- Wear the watch to fall asleep during 9:00 p.m. to 9:00 a.m.; the watch can record your sleep data of last night on the next day. Press the touch button to check the sleep data.
MESSAGES
- Unread messages will be displayed in the ‘Message’ interface. Press the touch key to enter and read the messages on the watch.
WEATHER
- After connecting with the RADLEY LONDON app, you can select city in the advanced settings of the app. and the weather of this city will be displayed on your smartwatch.
BREATHING
- Long press the touch key twice to enter the breathing interface. During the breathing process, long pressing or short pressing the touch key will exit the breathing exercise. Breathing exercises will auto-exit after one minute of each cycle.
DRINK ALERTS
- From advanced setting within the App. you can set reminders to ensure you stay hydrated throughout the day.
ACTIVITY REMINDER
- Turn on the sedentary reminder you’ve set in the RADLEY LONDON app. Your watch will vibrate to remind you to take a little excercise.
MUSIC CONTROL
- Open your phone’s default music APP, long touch for entering in BT music, then click in this interface for controlling music: Play/Stop/Next song/Last song.
DAILY ACTIVITIES
- The smartwatch will record your daily activity automatically. Press the touch key to check pedometer, distance and calories. After syncing with the RADLEY LONDON app, the sports data can be also checked within the app.
CALL ALERTS
- After successfully connecting with the RADLEY LONDON app, turn on ‘Notifications’ in Settings, and you will receive call notifications on your smartwatch.
CAMERA CONTROL
- Once connected to the App, the photo feature will be accessible via settings. By selecting ‘take photo’, you can take an image on your camera phone by pressing the touch key on your watch.
MORE
- Press the touch key repeatedly until MORE icon shows on the display and long press the touch key to access ‘Power off’, ‘About’, ‘Find Phone’ and ‘Reset’.
POWER OFF
- Long press the touch key to turn off the watch.
FIND YOUR PHONE OR SMARTWATCH
- Once the smartwatch is connected to the App., the find phone feature will be available. Access via sub-menu and then more. Press the touch key to open the ‘Find the phone’, then double tap the touch key and your phone will sound a locator alarm. To find your smartwatch from your phone, select find the device from the settings menu.
RESET
- Long press the touch key, your watch will be reset and restarted.
Please note: Your RADLEY LONDON tracker will reset every day at midnight. Data is stored on the tracker for 7 days. For best results, ensuring activities and a full history are recorded, we recommend you sync your tracker to the App. daily.
GPS CONNECTION
Your RADLEY LONDON smartwatch will connect to your smartphone GPS to bring a great range of features to your wrist!
-
Within the app select the trainer icon to enter GPS mode.
-
Click on the + within the top right corner to customize the sports you wish to utilize.
-
Tap the TROPHY icon to set your goals (distance, time, or calories)
-
Tap the SETTINGS icon to enter the MOTION SETTINGS menu, here you can enable VOICE BROADCAST. Select the voice notifications you’d like to receive.
-
When you are ready to start your activity tap GO on your app.
-
Both your smartwatch & smartphone will countdown 3, 2, 1 on-screen display, you can now begin your activity.
-
Tap the location map at any point during your activity to see your map location.
-
During activity your watch will display activity time, heart rate & calories burned.
-
To stop or pause activity, swipe right.
-
Tap & hold the RED icon to stop & exit.
-
Tap the GREEN icon to start or restart.
-
Your smartphone will give VOICE NOTIFICATIONS during your activity when you hit your goals.
When you have completed your activity, you can view your data & route within the app. -
MAP will show you the path of your activity.
-
OVERVIEW will show you activity statistics.
-
Tap the GRAPH icon to see your activity history.
-
Tap the GRAPH top left corner icon to see activity by week, month or year.
NOTE : If your activity lasts less than 5 minutes no data will be
recorded.
NOTE : Ensure you have voice notifications enabled within MOTION
SETTINGS.
HOW TO CARE FOR YOUR SMART WATCH
Do not wear your smartwatch whilst applying sprays or creams. Do not allow contact with any corrosive agent e.g. paint, solvents or adhesives, as this may affect the finish of the smartwatch. Your smartwatch is not suitable for swimming or showers. Do not immerse in water. Do not try to replace or disassemble the battery.
STRAP CARE
Environmental conditions can affect the durability of your strap. Please treat it with care and limit exposure to direct heat or sunlight. Keep your watch dry and away from wet surfaces. Do not use chemical cleaners on your strap and avoid contact with cosmetic products, such as fake tan or perfumes. Light soiling can be cleaned using a weak soapy water solution on a barely damp soft cloth. Please be aware light coloured straps i.e. whites, creams, and pastel colours, are prone to attract colour transfer from other surface materials and cosmetic substances. Please take care whilst wearing these products as discoloration of straps is not covered within the guarantee.
SILICONE STRAP CARE
To keep your silicone strap looking good, clean it regularly with mild soap
and water to remove any dirt, oils, lotions, etc., ensuring the case of your
smartwatch does not get wet. When you are not wearing your smartwatch, we
recommend you store it in the gift box received with the purchase.
STEP COUNTER
Smartwatches use multiaxis inertial sensors called accelerometers. These
detect wrist movement to measure steps. However, some wrist actions whilst
standing or sitting can mimic the arm movement of a step and can therefore
falsely record steps. The step count recorded each day should be used as a
guide only.
GUARANTEE
Quality and style are at the heart of what we do. RADLEY certifies this
smartwatch is produced using premium materials and is fully tested before
leaving our manufacturing center. Your RADLEY smartwatch is guaranteed against
any defective parts and construction for 2 years from the date of purchase.
Your guarantee is only valid if you present your original receipt when
returning the item. This guarantee provides you with rights in addition to
your consumer statutory rights and therefore does not limit your statutory
rights. Please note this guarantee does not cover lenses, bands, straps or
bracelets, water penetration, or batteries. Additionally, breakages caused by
accident or maltreatment are not covered. All products should be returned to
PH Services, Precision House, Unit 4, Starley Way, Solihull, B37 7GN.
Please contact us before sending in your product and we’ll guide you through
the process.
CONTACT US
If you require any further assistance using your RADLEY smartwatch or our
RADLEY LONDON App we are here to help!
You can also contact the RADLEY customer service team Monday to Friday, 9 AM
to 4 PM on:
+44 (0) 121 524 1400
radleywatches@peershardy.co.uk
There is also lots of information on our website https://www.radley.co.uk
/smart-watches-instructions/ that you may find helpful.
PRIVACY POLICY
Please check https://www.radley.co.uk/smartwatchprivacypolicy/ to view our
privacy policy. Please remember to check for updates periodically.
IMPORTANT SAFETY INFORMATION
BEFORE USING THE PRODUCT, PLEASE FAMILIARISE YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR USE!
BATTERY WARNINGS Do not attempt to replace the battery, open the device
enclosure, or disassemble your RADLEY product. Doing so can result in a safety
hazard
-
The integrated rechargeable battery cannot be removed or replaced
-
Substances within the RADLEY smartwatch battery may harm the environment or cause injury if handled or disposed of improperly. In the unlikely event of contact with battery acid, thoroughly flush the affected area with plenty of clean water and seek IMMEDIATE medical attention
-
When the battery is fully charged disconnect from the charger, and DO NOT exceed 2 hours of charge time.
DEVICE WARNINGS This is a Class A product. In a domestic environment, this product may cause radio interference. In this case, the user may be required to take adequate measures -
Ensure your smartwatch correctly engages with the charging contacts
-
Before each use, please check the product for damage, do not use it if the product is damaged
-
This is not a toy, children should not play with this product
-
Never attempt to open your smartwatch, this may result in danger
-
Protect the product from strong impacts, vibrations, direct sunlight, and dirt
-
Do not place heavy objects on the product
-
Do not exert pressure on the product
-
Avoid strong magnetic fields e.g. loudspeakers
-
Salt and thermal water can lead to the corrosion of metal parts. Remove the product before using saunas as the temperature difference can cause condensation
-
Do not operate the product near heat sources e.g. radiators or other devices emitting heat. Do not cover the product during operation or charging
-
Never use the product on airplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics
-
Do not use your RADLEY product if the display is cracked
-
Do not expose your RADLEY product to extremely high or low temperatures
-
Do not use abrasive cleaners to clean your RADLEY product
-
Remove your RADLEY product immediately if it feels warm or hot
-
Do not attempt to wear or operate your RADLEY product whilst charging
-
Do not charge your RADLEY product if wet
-
Do not check notifications or other applications on the product’s display while driving or in other situations where distractions could be hazardous. Always be aware of your surroundings when using RADLEY products and services
-
Ensure your smartwatch is removed at regular intervals for gentle cleaning.
HEALTH WARNINGS RADLEY smartwatches contain components that emit electromagnetic fields, with some of the models containing a magnetic charging dock, please be aware that these models contain magnets. These electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and implanted defibrillators. Please consult your doctor and medical device manufacturer if you use any medical device before using a RADLEY smartwatch -
The RADLEY heart rate monitor is designed for recreational use only, it is not intended for any medical use such as diagnosing or monitoring any medical conditions
-
The RADLEY heart rate monitor periodically emits flashing lights, please consult your doctor before use if you have epilepsy or similar conditions.
-
The RADLEY heart rate monitor usually provides an accurate estimate of your heart rate, but the reading can be affected by factors such as fit of the smartwatch, the physical characteristics of the wearer, and the intensity of the activity
-
Your RADLEY smartwatch will help calculate distances covered and calories burned during training. Please consult a doctor before starting new exercise regimes
-
RADLEY smartwatches contain sensors to track your movement to closely estimate your activity, sleep, calories used, etc. These close estimations are not always fully accurate
-
Some wearers may suffer skin irritation if the smartwatch is worn for prolonged periods, especially if you suffer from sensitive skin or have allergies. If you notice any irritation you should remove your smartwatch. To help prevent any irritation please ensure the smartwatch is removed regularly for cleaning & do not over-tighten on your wrist
-
We recommend you remove your smartwatch each day for gentle cleaning.
In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability can be accepted by RADLEY. If you have any questions or concerns, please contact us, you’ll find our contact details on this leaflet.
DECLARATION OF CONFORMITY
To view our declaration of conformity certificates, or If you have any questions or concerns, please contact us, you’ll find our contact details above. Manufactured by: Peers Hardy UK Ltd, Precision House, Starley Way, Birmingham Business Park, Bickenhill Lane, Solihull, B37 7GN, UK.
DISPOSAL OF GOODS
- The crossed-out wheelie bin symbol is to remind you that waste electrical products, batteries, and accumulators should not be disposed of in household waste.
- If you are unable to reuse or recycle your article it should be disposed of at a civic amenity site or a local authority recycling facility.
- Do not dispose of your RADLEY product within household waste.
- Disposal of your RADLEY packaging and product should be done under local regulations.
References
- Smart Watch Instructions | Radley London
- Smart Watch Instructions | Radley London
- Smart Watch Terms | Smartwatch Policy | Radley London
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>