molift BM04601 Quick Raiser sandals User Manual
- June 6, 2024
- molift
Table of Contents
molift BM04601 Quick Raiser sandals User Manual
Important
This user manual contains important safety instructions and information regarding the use of the lifter and accessories.
In this manual the user is the person being lifted. The assistant is the person operating the lifter.
Warning!
This symbol indicates important information related to safety. Follow these
instructions carefully.
Read user manual before use! It is important to fully understand the content of the user manual before attempting to use the equipment.
Visit www.etac.com to download documentation to ensure you have the latest version.
Declaration and warranty
CE declaration
The product, and its related accessories, described in this instruction for
use (IFU), is in compliance with the regulation (EU) 2017/745 of 5. April 2017
as a medical device, risk class I. Any serious incident that occurs in
relation to the device should be reported to the manufacturer and the
competent authority of the Member State in which the user and/or patient is
established.
Warranty notice
Two-year warranty against defects in workmanship and materials of our
products. One-year warranty for batteries. Please refer to
www.etac.com for terms and conditions.
About Molift Quick Raiser sandals
Molift Sandals is designed for use together with Molift Quick Raiser.
Read the operator manual carefully before use of lifter with accessories. All safety regulations applies.
Sandals are only for minor support of user’s feet. User must have full control of leg mobility.
The sandals come with velcro tape mounted on the underside.
Mounting of Molift Quick Raiser sandals
Remove the anti-skid tape from the Quick Raiser on which the sandals shall be mounted.
Remove the tape from the underside on the velcro on the sandals.
Place the sandals on the chassis. The positioning may vary for different users.
Place the other sandal on the opposite side. Press both sandals against the chassis to ensure they are properly fastened.
The sandals can be removed and replaced, only the hard side of the velcro will remain on the Molift Quick Raiser chassis.
Etac A/S Parallelvej 3 DK-8751 Gedved www.etac.com