ATEN VM6809H 8 x 9 4K HDMI Matrix Switch with Scaler User Guide

VM6809H 8 x 9 4K HDMI Matrix Switch with Scaler
User Guide

VM6809H 8 x 9 4K HDMI Matrix Switch with Scaler

ATEN VanCryst™
VM6809H
8 x 9 4K HDMI Matrix Switch with Scaler
Quick Start Guide

Hardware Review

Package Contents

• 1 VM6809H 8 x 9 4K HDMI Matrix Switch
• 1 Power Cord
• 1 Rack Mounting Kit
• 1 User Instructions

Hardware Installation

VM6809H 8 x 9 4K HDMI Matrix Switch with Scaler

Overview

Front View
1 LCD Display
2 Input Pushbuttons 1-8
3 Output Pushbuttons 1-9
4 Menu Pushbutton
5 Cancel Pushbutton
6 Profi le Pushbutton
7 Enter Pushbutton| Rear View
1 Power Socket
2 Power Switch
3 Grounding Terminal
4 Audio Out Port
5 HDMI Out Ports
6 HDMI In Ports
7 Ethernet Port
8 RS-232 Serial Port
---|---

B Hardware Installation

1. Use a Cat 5e cable to connect the VM6809H’s Ethernet port to LAN/ WAN to allow for access to the web interface.

2. Connect up to 9 HDMI display devices to the HDMI Out Ports.

3. Connect up to 8 HDMI video sources to the HDMI In Ports.

4. (Optional) To extract HDMI audio, connect a speaker to the Audio Out Port.

5. (Optional) To control the VM6809H using a serial device, use a serial cable to connect the RS-232 Serial Port to a computer or a serial controller.

6. Use a grounding wire to ground the unit by connecting one end of the wire to the grounding terminal, and the other to a suitable grounded object.
   Note: Do not omit this step. Proper grounding helps prevent damage to the unit from surges or static electricity.

7. Plug the supplied power cord into the power socket, and then into an AC power source.

8. Power on the VM6809H and all the connected devices.

Operation

The VM6809H can be confi guard and operated locally on the front panel LCD using the pushbuttons, remotely via a web interface over a standard TCP/IP connection, or by an RS-232 serial controller. For detailed information, see the user manual.
Front Panel Operation
To gain access to devise settings using the front panel pushbuttons, type the default password 1234 using the Input Pushbuttons. The main functions of the pushbutton are described below.

mode
Profi le| • Cycle through profi les for input and output connection
Cancel| • Go back a level
• Return to the initial screen
• Exit the current page
Enter| • Select options
• Confi rm operations

Remote Operation via the Web Interface
The VM6809H supports three levels of remote users with various operational privileges and 16 concurrent logins. To access the web interface, follow the steps below:

1. Type the default IP address http://192.168.0.60 into a web browser. If a security alert appears, accept the certifi cate. The Login screen appears.
2. Type the default username administrator and the password to log in.

Note: The VM6809H supports usernames in lowercase only.
Support and Documentation Notice
All information, documentation, firmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation by the manufacturer.
To reduce the environmental impact of our products, ATEN documentation and software can be found online at http://www.aten.com/download/
Technical Support
www.aten.com/support
Scan for more information

http://www.aten.com/products/productItem.php?model_no=

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution: Any changes or modifi cations not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
Warning: Operation of this equipment in a residential environment could cause radio interference.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

© Copyright 2017 ATEN®
International Co., Ltd.
ATEN and the ATEN logo are trademarks of ATEN International Co., Ltd. All rights reserved. All
other trademarks are the property of their respective owners.
Part No. PAPE-1223-K50G
Printing Date: 11/2017

References

• ATEN - Simply Better Connections | ATEN U.S.A.
• Downloads | ATEN Corporate Headquarters

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>