MEAN WELL XLC-60 series LED Driver Owner’s Manual

: June 1, 2024
: MEAN WELL

MEAN WELL XLC-60 series LED Driver

MEAN-WELL-XLC-60-series-LED-Driver-FIG-1

Specifications

Model: XLC-60-12, XLC-60-24, XLC-60-48
DC Voltage Range: 12V, 24V, 48V
No Load Voltage: 12V, 24V, 48V
Output Default Current: 5A, 2.5A, 1.25A
Rated Power: 60W
Setup/Rise Time: 800ms/150ms at 230VAC, 1000ms/150ms at 115VAC
Voltage Range: 110-305VAC, 155-431VDC
Frequency Range: 47-63Hz
Power Factor: PF0.95 at 230VAC, PF0.9 at 277VAC (at full load)
Total Harmonic Distortion: THD < 20%

Product Usage Instructions

Installation:

Ensure that the input power source matches the specified voltage range.
Connect the LED driver to the LED light fixture following the manufacturer’s instructions.
Secure all connections properly to avoid any electrical hazards.

Operation:

Apply power to the LED driver and ensure that the LED light functions properly.
If adjustments are needed, refer to the user manual for any setup procedures.

Maintenance:

Regularly inspect the LED driver for any signs of damage or wear.
Clean the driver and surrounding area to prevent dust accumulation that can affect performance.

FAQ

What should I do if the LED driver is overheating?
If the LED driver is overheating, immediately turn off the power and allow it to cool down before attempting to use it again. Check for any obstructions to ventilation and ensure proper airflow around the driver.
Can I use this LED driver with dimmable LED lights?
Yes, this LED driver is compatible with dimmable LED lights. Make sure to follow the dimmer compatibility guidelines provided by the LED light manufacturer.

Features

Constant power mode output with multiple stage selectable by dip switch or NFC setting (H-type)
Constant voltage mode output(12/24/48V)
Plastic housing with class 11/2 and PFC design
Flicker free, complying with IEEE1789/ErP
Standby power consumption <0.5W
Meet emergency lighting (EL) application
Minimum dimming level 1% (DALI-2 DT6)
Dimming functions: 3 in 1 dimming (Dim-to-off) DALI-2 + Push dimming
5 years warranty

Applications

Recessed Light
Downlight
Panel Light
Commercial Lighting
Decorative Lighting
LED strip lighting
DALI digital Lighting

GTIN CODE

MW Search: https://www.meanwell.com/serviceGTIN.aspx

Description

XLC-60 Series is a 60W with constant power and constant voltage output LED driver. It can operate from 110~305V AC and output current ranging between 900 mA to 1700 mA selectable by dip switch or NFC setting. Thanks to high efficiency up to 90%, it is able to operate for -25°C ~90°C case temperature under free air convection. XLC-60 is designed based on latest safety regulations with 3 in 1 and DALI-2 dimming. XLC-60 can also be adjusted for brightness with a push button as a simple way dimming, so it provides the design flexibility for LED Lighting application.

Model Encoding

MEAN-WELL-XLC-60-series-LED-Driver-FIG-2

SPECIFICATION

MEAN-WELL-XLC-60-series-LED-Driver-FIG-24 MEAN-
WELL-XLC-60-series-LED-Driver-FIG-25

BLOCK DIAGRAM

MEAN-WELL-XLC-60-series-LED-Driver-FIG-3

DRIVING METHODS OF LED MODULE

MEAN-WELL-XLC-60-series-LED-Driver-FIG-4

CONSTANT POWER TABLE

XLC-60-H is a multiple-stage constant power driver, selection of output current through DIP switch or NFC setting is exhibited below.

Vo	Io DIP S.W	1	2	3
9~54V	900mA	—-	—-	—-
9~54V	1050mA	—-	—-	ON
9~50V	1200mA	—-	ON	—-
9~46V	1300mA	—-	ON	ON
9~43V	1400mA(default)	ON	—-	—-
9~40V	1500mA	ON	—-	ON
9~38V	1600mA	ON	ON	—-
9~36V	1700mA	ON	ON	ON

NFC Function Description (By request)

The output current of the NFC Mode LED driver can be adjusted using NFC via the mobile APP Operation Instruction Compatible phone Install an NFC-compatible smart mobile device or phone with Android TM 4.1 or IOS12 updates. Steps for setting output current via NFC
Download Meanwell APP on mobile device or mobile phone, and enable NFC function.
Check the NFC antenna position of the mobile phone please.
Enter Meanwell APP -> Top left menu -Installation Manual/APP->PowerNFC, approach the LED driver NFC sensing position and perform sensing.
APP displays the functional parameters, and the relevant parameters are modified as required.
Tap the APP write button and quickly move the phone antenna close to the NFC sensing position of the LED driver.
The write completes when the mobile phone displays”Success”

APP Function Description
APP Interface:

MEAN-WELL-XLC-60-series-LED-Driver-FIG-5

To be used through APP available on Apple Store and Google Play Store for iOS and Android. Search: MEAN WELL on

DIMMING OPERATION

B type
3 in 1 dimming function

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-: 0 ~ 10VDC, or 10V PWM signal or resistance.
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100м A (typ.)

Applying additive 0 ~ 10VDC

MEAN-WELL-XLC-60-series-LED-Driver-FIG-7

Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

MEAN-WELL-XLC-60-series-LED-Driver-FIG-8

Applying additive resistance: 0~100k S

MEAN-WELL-XLC-60-series-LED-Driver-FIG-9

Note :

Min. dimming level is about 6% and the output current is not defined when 0% < lout<6%.
The output current could drop down to 0% when dimming input is about 0k2 or 0Vdc, or 10V PWM signal with 0% duty cycle.

DIMMING OPERATION

DA2 type (DALI-2 digital dimming function)

Input wiring diagram

MEAN-WELL-XLC-60-series-LED-Driver-FIG-10

PUSH dimming (primary side)

The factory default dimming level is at 100%.
If the push action lasts less than 0.05 sec., it will not lead to a change for the status of the driver.
Up to 10 drivers can perform the PUSH dimming at the same time when utilizing one common push button.
The maximum length of the cable from the push button to the last driver is 20 meters.
Action| Action duration| Function
---|---|---
Short Push| 0.1~1s| Turn ON-OFF the driver
Double Click| Click twice in 1.5s| Set up the dimming level to 100%
Long Push| 1.5~10s| Every Long Push changes the dimming direction, dimming up or down