MEAN WELL SPV-150-48 Enclosed Power Supply Installation Guide

: June 1, 2024
: MEAN WELL

Table of Contents

MEAN WELL SPV-150-48 Enclosed Power Supply
Product Usage Instructions

MEAN WELL SPV-150-48 Enclosed Power Supply

MEAN-WELL-SPV-150-48-Enclosed-Power-Supply-PRODUCT-
IMAGE

Specifications :

Model: SPV-150 series
Output Power: 150W
Input: Universal AC input / Full range
PFC Function: Built-in active PFC function, PF>0.94
Protections: Short circuit, Overload, Over voltage, Over temperature
Cooling: Free air convection
Output Voltage Programmable: 20~110% by 1~5.5VDC external control signal
Remote ON-OFF Control: Built-in
Switching Frequency: Fixed at 100KHz
Warranty: 3 years

Product Usage Instructions

Installation :

Ensure the input power matches the specified voltage range (88 ~ 264VAC).
Connect the output to the intended device, ensuring proper polarity.
For voltage adjustment, use a 1~5.5VDC external control signal within the specified range.

Operation:

Apply power to the unit within the specified input voltage range.
Use the remote ON-OFF control for power management.
Monitor for any abnormal operation or triggering of protection mechanisms.

Maintenance :

Regularly check for dust accumulation and ensure proper ventilation for cooling.
If encountering issues, refer to the user manual for troubleshooting steps.

FAQ :

Q: What is the warranty period for the SPV-150 series?
A: The product comes with a 3-year warranty.
Q: How can I adjust the output voltage of the power supply?
A: The output voltage can be programmed from 20~110% by using a 1~5.5VDC external control signal
Q: What are the main protections provided by the SPV-150 series?
A: The power supply offers protections against short circuit, overload, over voltage, and over temperature.

150W Single Output with PFC Function

Features

Universal AC input / Full range
Built-in active PFC function, PF>0.94
Protections: Short circuit / Overload / Over voltage / Over temperature
Cooling by free air convection
Output voltage programmable from 20~110% by 1~5.5VDC external control signal
Built-in remote ON-OFF control
Fixed switching frequency at 100KHz
3 years warranty $MEAN-WELL-SPV-150-48-Enclosed-Power-Supply- $2$$

GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx

SPECIFICATION

MODEL	SPV-150-12	SPV-150-24	SPV-150-48
OUTPUT	DC VOLTAGE	12V	24V
RATED CURRENT	12.5A	6.25A	3.125A
CURRENT RANGE	0 ~ 12.5A	0 ~ 6.25A	0 ~ 3.125A
RATED POWER	150W	150W	150W
RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	240mVp-p
VOLTAGE ADJ. RANGE	10.8 ~ 13.2V	20 ~ 26.4V	41 ~ 52.8V
VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%
LINE REGULATION	±0.3%	±0.2%	±0.2%
LOAD REGULATION	±0.5%	±0.5%	±0.5%
SETUP, RISE TIME	800ms, 50ms/230VAC 2500ms, 50ms/115VAC at

full load
HOLD UP TIME (Typ.)| 16ms/230VAC             16ms/115VAC at full load
INPUT| VOLTAGE RANGE Note.5| 88 ~ 264VAC            124 ~ 370VDC
FREQUENCY RANGE| 47 ~ 63Hz
POWER FACTOR (Typ.)| PF>0.94/230VAC              PF>0.98/115VAC at full load
EFFICIENCY (Typ.)| 82%| 83%| 83%
AC CURRENT (Typ.)| 2.5A/115VAC            1.25A/230VAC
INRUSH CURRENT (Typ.)| 20A/115VAC             45A/230VAC
LEAKAGE CURRENT| <1mA / 240VAC
PROTECTION| OVERLOAD| 105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE| 13.8 ~ 16.2V| 27.6 ~ 32.4V| 57.6 ~ 67.2V
Protection type : Shut down o/p voltage, re-power on to recover
OVER TEMPERATURE| Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION| REMOTE CONTROL| 4 ~ 10VDC power off, <0 ~ 0.8VDC power on
OUTPUT VOLTAGE TRIM| 2.4 ~ 13.2V| 4.8 ~ 26.4V| 9.6 ~ 52.8V
ENVIRONMENT| WORKING TEMP.| -20 ~ +65℃ (Refer to “Derating Curve”)
WORKING HUMIDITY| 20 ~ 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -40 ~ +85℃, 10 ~ 95% RH non-condensing
TEMP. COEFFICIENT| ±0.03%/℃ (0 ~ 50℃)
VIBRATION| 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY EMC (Note 4)| SAFETY STANDARDS| UL60950-1, TUV BS EN/EN62368-1, IEC62368-1, EAC TP TC 004 approved
WITHSTAND VOLTAGE| I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCE| I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25℃/ 70% RH
EMC EMISSION| Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3, EAC TP TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8,11, BS EN/EN55024, light industry level, EAC TP TC 020
OTHERS| MTBF| 2112.6K hrs min.        Telcordia SR-332 (Bellcore) ; 210.3K hrs min.        MIL-HDBK-217F (25℃)
DIMENSION| 21511550mm (LWH)
PACKING| 1.1Kg; 12pcs/14Kg/0.92CUFT
NOTE|

All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
Tolerance : includes set up tolerance, line regulation and load regulation.
The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 360mm*360mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EM testing of component power supplies.” (as available on http://www.meanwell.com)
Derating may be needed under low input voltages. Please check the derating curve for more details.
The ambient temperature derating of 3.5℃/1000m with fanless models and of 5℃/1000m with fan models for operating altitude higher than 2000m(6500ft).

Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx