PHOENIX GOLD Z5CS Component Speakers User Guide

PHOENIX GOLD Z5CS Component Speakers

FEATURES

Shallow Mount Design – Compact basket design to achieve maximum installation flexibility Z-Series
Cone – High-quality polypropylene cone material for great sounding audio
Space-Saving Internal Crossover – Separate audio frequencies, creating a more realistic sound experience
Butyl Rubber Surround – Excellent durability for prolonged performance and improved lateral cone stability
Positional Ferro Fluid Tweeters – Creates the ideal sound stage and provides enhanced thermal contact for improved reliability and optimum damping for the voice coils

SPECIFICATION

Component Fixing

Tweeter Dimensions

INSTALLATION GUIDELINES

Ensure the audio system is turned off before making any connections to the amplifier, speakers or source unit. Failure to do so could result in permanent damage to the audio system.
When wiring the speakers ensure that the wire is protected from sharp objects and always use rubber grommets when wiring through metal panels. Ensure all terminals and connections are protected from the vehicle chassis and from each other as failure to do so could result in permanent damage to the audio system.
When connecting speakers to the source unit or amplifier ensure you connect the positive and negative output wire from the source unit to the corresponding speaker terminals. This will ensure the audio system will be in phase.

1. Ensure there is adequate clearance and depth for the speaker to be mounted.
2. Use the supplied template to mark out & cut the correct diameter hole.
3. Drill four holes for the mounting screws.
4. Separate the grille from the frame
5. Insert the speaker and grille and affix with the screws provided
6. Complete installation by replacing the grille into the grille frame.

WARNING

Do not drill mounting holes with speaker in place as this could allow drill shavings to damage the voice coil and void the speaker warranty.

TWEETER (Surface/Angle Mount)

To obtain the best performance from the tweeter it should be located on axis to approximately 4” below the rear view mirror. Select the mount you require and use this as a template to drill the holes to mount or alternatively if using an adhesive pad ensure the mounting surface is cleaned with a residue free cleaner and attach the speaker using the adhesive pad. Attach the wires to the speaker terminals.

TWEETER (Flush Mount)

Ensure you have adequate depth to mount the tweeter and cut a 50mm hole. Assemble the rear mount with the spring clamp and press through from the rear of the hole, then attach the front plate to the rear plate. Attach the wires to the speaker terminals.

CONTENTS

• 2 x Phoenix Gold Component Speakers
• 2 x Phoenix Gold Tweeters with wires
• 2 x Phoenix Gold Speaker Grilles
• 1 x Mounting Template
• 8 x Mounting Screws
• 1 x User Manual

NOTE

Speaker Wire included with the component speaker system will only connect the tweeter to the speaker, additional wiring is needed to connect to the audio system.

WARNING

Audio Systems can produce sound levels over 135dB. Continuous exposure to sound pressure levels over 100dB may cause permanent hearing loss. Please watch for emergency vehicles as warning signals may not be heard.

Phoenix Gold Product Warranty

LIMITED WARRANTY

Phoenix Gold warrants this product to be free of defects in materials and workmanship for a period of one (1) years from the original date of purchase. This warranty is not transferable and applies only to the original purchaser from an authorized Phoenix Gold dealer in the United States of America only. Should service be necessary under this warranty for any reason due to manufacturing defect or malfunction, Phoenix Gold will (at its discretion), repair or replace the defective product with new or remanufactured product at no charge. Damage caused by the following is not covered under warranty: accident, misuse, abuse, product modification or neglect, failure to follow installation instructions, unauthorized repair attempts, misrepresentations by the seller. This warranty does not cover incidental or consequential damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic damage due to accident or normal wear and tear is not covered under warranty.

INTERNATIONAL WARRANTIES:

Products purchased outside the United States of America are covered only by that country’s Authorized Phoenix Gold reseller and not by Phoenix Gold. Consumers needing service or warranty information for these products must contact that country’s reseller for information.

Customer Support

email – support@phoenixgold.com (US)
tel – 1-800-477-2267 (East Coast)
email – technical.eu@aampglobal.com (Europe)
15500 Lightwave Drive, Suite 202
Clearwater, Florida 33760
Woolmer Way, Bordon, Hampshire,
GU35 9QE, United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>