PHOENIX GOLD ZDAPMB1 Mercedes DSP Power Up Kit User Manual

PHOENIX GOLD ZDAPMB1 Mercedes DSP Power Up Kit

Product Information

ZDAPMB1 Mercedes Vito Stereo Removal and Cable Installation

• The ZDAPMB1 is a product designed to help with the removal and installation of stereo and cable in a Mercedes Vito.
• The product comes with instructions that guide the user on how to remove the stereo, install cables, and install an amplifier.
• The product is easy to use and requires no technical expertise.

Stereo Removal Instructions

To remove the stereo, follow these steps:

1. Use a plastic pry tool on the outer edges of the plastic panel to loosen the clips all around. (The whole panel comes off in one piece)
2. Loosen the four screws marked with red circles. Then the stereo is loose and ready to be taken out.
3. Remove all connectors on the back of the stereo.

Cable Installation Instructions

To install the cables, follow these steps:

1. Remove the black and white connectors on the back of the quad lock connector.
2. Connect the black and white connectors to the CT10MC02 quad lock connector.
3. Use a plastic pry tool to remove the center panel for easier cable laying.
4. Remove the lower center panel. On each side there is a plastic lid, remove both of them and loosen the T25 screw hidden behind.
5. Pull the panel towards you from the center to loosen the panel.
6. Pull up the cable at the back.
7. Remove the resistor cable on the speaker side.
8. Pull the carpet up so that you can pull the cable in the center under the carpet.
9. Remove the passenger seat by pulling it straight up.
   • (Note: In some cases, this may require extreme force.)
10. Pull up the cable at the back.
11. Install the amplifier at the back under the seat.
12. Screw the amplifier into place and connect the ZDAISOT connector cable.

Installation Complete

After completing the installation, put all the panels back in reverse order. Your Mercedes Vito is now ready for use. Enjoy your music!

INSTALLATION INSTRUCTION

Stereo Removal 1

• Use a plastic pry tool on the outer edges of the plastic panel to loosen the clips all around. (The whole panel comes off in one piece)

Stereo Removal 2

• Tools required: Torx T25 bit
• Loosen the four screws marked with red circles. Then the stereo is loose and ready to be taken out. Remove all connectors on the back of the stereo.

Cable Installation 1

• Remove the black and white connectors on the back of the quadlock connector.

Cable Installation 2

• Connect the black and white connectors to the CT10MC02 quad lock connector.
• Tools required: Plastic pry tool
• Use a plastic pry tool to remove the center panel for easier cable laying.

Cable Installation 4

• Tools required: Torx T25 Bit

1. Remove the lower center panel. On each side there is a plastic lid, remove both of them and loosen the T25 screw hidden behind.
2. Pull the panel towards you from the center to loosen the panel.

Cable Installation 5

• Loosen the 12V outlet connector by pulling it upwards.

Cable Installation 6

• Remove the side panel by pulling in the direction of the arrows.

Cable Installation 7

• Remove the plastic trim panel for the battery.

Cable Installation 8

• Pull the side panel uppwards to remove it.

Cable Installation 9

• Connect the ZDAISOT cable to the CT10MC02 and pull the cable down to the floor.
• OBS! Use the external 10ohm resistor cable on the speaker side.

Cable Installation 10

1. Pull the carpet up so that you can pull the cable in the center under the carpet.
2. Remove the passanger seat by pulling it straight up.

OBS! In some cases this may require extreme force.

Cable Installation 11

• Pull up the cable at the back.

Amplifier 1

• Install the amplifier at the back under the seat.

Amplifier 2

• Screw the amplifier into place and connect the ZDAISOT connector cable.
• Then put all the panels back in reverse order.

Installation Complete

• The installation is now complete. Now connect the USB cable to a PC/MAC and download our file at (någon hemsida) to get the best result!
• Happy listening.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>