Alpine FNHW4101 Vanity Unit Flat Pack Instruction Manual
- June 1, 2024
- Alpine
Table of Contents
Alpine FNHW4101 Vanity Unit Flat Pack
Spare Part List
| Part | Description | Quantity |
|---|---|---|
| Screws | 9x41mm | x8 |
| Screws | 3x12mm | x8 |
| Cam Lock | x18 | |
| Dowel | 5x30mm | x6 |
| Shelf Support | x4 | |
| Wood Dowel | 8x30mm | x8 |
| Bracket | x4 | |
| Screw | x2 | |
| Handle | x1 | |
| Hinge | x2 |
Assembly Instructions
- Align the wooden panels (1) as the base, and insert the wood dowels (8x30mm) into the pre-drilled holes.
- Attach the side panels (2) to the base using the cam locks and screws (3x12mm).
- Secure the top panel (3) to the side panels using the cam locks.
- Install the back panel (4) by sliding it into the grooves of the side panels and secure it with screws (9x41mm).
- Insert the shelf supports (5) into the side panels at the desired height and place the shelf on top.
FAQ
What is the size of the cam lock?
The cam lock size is not specified in the spare part list or assembly instructions
How many screws are needed to secure the back panel?
The back panel is secured with two screws (9x41mm).
Can the shelf height be adjusted?
Yes, the shelf height can be adjusted by repositioning the shelf supports (5) in the side panels.
Are tools required for assembly?
Yes, a screwdriver is likely needed for assembly, as indicated by the use of screws and cam locks.
Assembly Diagrams Description
The assembly diagrams depict the step-by-step process for constructing a piece
of furniture, possibly a cabinet or shelving unit. Each component is labeled
with a number that corresponds to the assembly instructions. The diagrams show
the insertion of dowels, the application of cam locks, the placement of wooden
panels, and the attachment of a back panel and shelf. Detailed insets provide
close-up views of the hardware being installed, such as cam locks into pre-
drilled holes and screws securing the hinge.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>