Alpine MZP610A 3 Piece Weathered Wood Bistro Set in Green Owner’s Manual

October 30, 2023
Alpine

MZP610A 3 Piece Weathered Wood Bistro Set in Green

Alpine-MZP610A-3-Piece-Weathered-Wood-Bistro-product-
image

Product Information: Green Weathered Wood and Metal Bistro Set

Thank you for choosing the Green Weathered Wood and Metal Bistro Set from Alpine. Our product range includes Fountains, Birdbaths, Statuary, Pond Supplies & More. All our products are made of high-quality materials. In case of any defects, we will repair or replace the product within the warranty period. A valid proof of purchase and photos of defective merchandise are required.

The limited warranty covers severe or complete fading of the finish within the first year from purchase date. The warranty will not cover damages due to inadequate care, neglect, environmental and/or natural elements, immersion in water, improper installation/storage, and/or maintenance.

Components:

  • Tabletop (A) x1
  • Table Legs (Folded) (B) x1
  • Cap Nuts (C) x3
  • Hex Wrench (D) x1
  • Chairs (Folded) (E) x2

Assembly Instructions

  1. Unpack all components carefully and ensure all parts have been removed from the packaging.
  2. Place the Tabletop (A) with the wood paneling facing down and unfold the Table Legs (B) into a tripod formation.
  3. Align the holes at the top side of each Table Leg (B) with the 3 bolts on the bottom side of the Tabletop (A). Fasten a Cap Nut (C) at each bolt clockwise with the included Hex Wrench (D).
  4. Carefully flip the table onto its legs and place it on a level surface.
  5. Unfold each Chair (E) by pulling the seat downward while holding the chair back still.
  6. Congratulations! Your bistro set is now assembled. Arrange the table and chairs in a beautiful spot and enjoy!

Note: The total weight capacity of the table is 154 lbs., and the total weight capacity of each chair is 220 lbs.

Limited Warranty Information

Thank you for choosing an Alpine product! We aim to please with our wide range of products including Fountains, Birdbaths, Statuary, Pond Supplies & More. All of our products are constructed from the highest quality materials. In the event that we have not achieved our usual standard of excellence, we will repair or replace, at our discretion, within the warranty period. A valid proof of purchase, with the purchase date clearly indicated, must be provided. Photos of defective merchandise will also be required to help distinguish the actual cause of the defect. Please read below for a detailed description of warranty coverage.

Water Damage
Alpine products are not manufactured to withstand extreme temperatures. Improper storage that allows water to freeze within a product may cause damage and is considered negligence and will, therefore not be covered under this warranty. The use of “hard water” and/or caustic cleaners can affect the paint or other finishes. Failure to keep the unit clean, and use of such additives/cleaners, will also void the warranty. Please note: for fountains, it is normal for some splashing to occur and protecting the immediate surfaces is not the responsibility of Alpine Corporation

Paint & Color (Retention and/or Loss)
The use of water will cause natural erosion to the color. This area can be touched up using standard paint. The paint is designed to protect the entire finish against breakdown of color. As with any product, all finishes with time will gradually fade and discolor. The warranty will only cover against severe or complete fading within the first year from date of purchase with the above exclusion.

Procedure/Service
Should a warranty/claim be needed, you should contact the retailer from whom you purchased the product. If that is not an option, you can contact Alpine Corporation at www.alpine4u.com. When contacting Alpine Corporation, you must be prepared to show proof of purchase, provide photographs and any other information needed to validate your claim. This may be necessary to distinguish between a partial or complete replacement of a defective product. The warranty does not cover any items with multiple parts; the warranty will ONLY cover the individual component of the unit/item that may be defective. Replacement parts can be made available to a consumer through the original selling party, or an approved parts retailer. If this is not an option, contact our customer service department. Item is covered under one year limited warranty from the date of purchase. If your purchase was after our 30-day grace period, payment information will be requested for shipping charges.

Not Covered Under Warranty
The limited warranty will NOT cover cases of damages due to

  1. Inadequate care and/or neglect
  2. Environmental and/or natural elements
  3. Immersion in water, unless specified
  4. Improper Installation/Storage and/or Maintenance

This warranty is void if the product has been damaged by accident, misuse, negligence, improper installation and/or modifications have occurred. This includes any and/or all defects arising out of freezing water damage, hard water damage, failure to keep the unit clean and free of harmful additives such as bleach, chlorine, etc…. which affects the paint and/or parts. This warranty also  does not cover any additional charges or installation, removal, disposal and/or shipping costs or consequential damage associated with any warranty claim.

Assembling & Using Your Product

Unpack all components carefully. Please check to ensure all parts have been Removed from the packaging.

Components:

Alpine-MZP610A-3-Piece-Weathered-Wood-Bistro-01 Assembly:

  1. Place the Tabletop (A) with the wood paneling facing down and unfold the
    Table Legs (B) into a tripod formation.Alpine-MZP610A-3-Piece-Weathered-
Wood-Bistro-02

  2. Align the holes at the top side of each Table Leg (B) with the 3 bolts on the bottom side of the Tabletop (A). Fasten a Cap Nut (C) at each bolt clockwise with the included Hex Wrench (D). Alpine-MZP610A-3-Piece-Weathered-Wood-Bistro-03

  3. Carefully flip the table onto its legs and place on a level surface.

  4. Unfold each Chair (E) by pulling the seat downward while holding the chair back still. Alpine-MZP610A-3-Piece-Weathered-Wood-Bistro-04

  5. Congratulations. Your bistro set is now assembled. Arrange the table and chairs in a beautiful spot and enjoy!

NOTE: Total Table Weight Capacity is 154 lbs., and the Total Chair Weight Capacity is 220 lbs. Alpine-MZP610A-3-Piece-Weathered-Wood-
Bistro-05

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Alpine User Manuals

Related Manuals