GAZELLE GW7010 Orbital Sander User Manual

GAZELLE GW7010 Orbital Sander

Specifications:

• Model: GW7010
• Product Type: Orbital Sander
• Battery Configuration: Various options depicted in illustrations

Product Usage Instructions

Work Area Safety:

• Keep your work area clean and well lit to prevent accidents.
  Avoid operating the sander in explosive environments.

• Ensure children and bystanders are at a safe distance during operation to avoid distractions.

Electrical Safety:

• Match power tool plugs with the outlet to prevent electrical hazards.

Personal Safety:

• Stay alert and avoid operating the tool when fatigued or impaired. Always use personal protective equipment like eye protection.
• Make sure the power tool switch is off before connecting to a power source or battery pack.
• Remove any adjusting key or wrench before turning on the tool to prevent injuries.
• Maintain proper balance and footing while using the sander to ensure control.

Power Tool Use and Care:

• Use the correct power tool for the intended application to work efficiently and safely.
• Do not use a power tool with a malfunctioning switch; it should be repaired immediately.
• Disconnect the plug or remove the battery pack before making adjustments or changing accessories to prevent accidental activation.

Frequently Asked Questions (FAQ):

1. Q: Can I use the GW7010 Orbital Sander in explosive environments?
   A: No, it is not safe to operate power tools in explosive atmospheres due to the risk of sparks igniting flammable substances.

2. Q: What type of personal protective equipment should I use?
   A: Always wear eye protection when using the sander. Additionally, consider using dust masks, non-skid safety shoes, hard hats, or hearing protection based on the working conditions.

GENERAL POWER TOOL SAFETY

WARNINGS
WARNING! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed be low may result in electric shock, fire and/or serious personal injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery- operated (cordless) power tool.

Work Area Safety

• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

Power Tool Use and Care

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

• Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.Power tools are dangerous in the hands of untrained users.

• Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.
  If damaged, have the power tool repaired before use.Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean and free from oil and grease.Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.

Service

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

UK power plug warnings:
Your product is fitted with an BS 1363-1 approved electric plug with internal fuse approved to BS 1362. If the plug is not suitable for your socket, it should be removed and an appropriate plug should be fitted in its place by an authorized customer service agent. The replacement plug should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Symbol
WARNING
To reduce the risk of injury, user must read instruction manual
Class II tool

Technical Data

This product is a hand-held orbital sander powered by single phase series motor. This product is suitable for micro grinding, correction and other operations on the surfaces of wood and metal materials under general environmental conditions.

The performance parameters of this product are shown in the table below:

Due to the continuing program of research and development, the specifications herein are subject to change without prior notice.

Standard Accessories
Note：The accessories shown on the figures, tables or instructions are not all included in the scope of supply.

Instructions for Operation

Caution: Always be sure that the tool is switched off and unplugged before attempting to perform adjustment or inspection.

Switch Operation
To start the tool, slide the switch to the “1” position. To top the tool, slide the switch to the “0” position. Caution: Before plugging in the tool, always check to see that the tool is switched off.

Installing or Removing Abrasive Paper
As shown, pull the control lever upwards to release the lock of clamp, then insert the paper end into the clamping part, and align the edges of abrasive paper, which should be flat, parallel to the side of the base (Pre-bending paper makes operation easier). Once paper mounted in place, please pull the clamp lever to the original position. Repeat the same process for the other end of the base, maintaining the proper paper tension. After inserting the abrasive paper, please be sure that the clamping part pressed. Otherwise the paper will loose and sliding, and lead to uneven of sanding operation.

Sanding Operation
As below, hold the tool firmly. Turn the tool on and wait until it attains full speed. Then gently place the tool on the workpiece surface. Generally, the tool only applies to micro grinding for the surface of workpieces. The grinding quality is more important than the grinding amount and grinding rate. Thus, do not apply strong pressure to grind. Keep the baseplate aligned over the workpieces. Good finish can be obtained on the furniture or fine surface if put a cloth under the workpieces.

Cautions:

1. Never plug up the air outlet with your fingers or hand.
2. Never run the tool without the abrasive paper. You may seriously damage the pad.
3. This tool is not waterproof, and do not use water on the workpiece.

Maintenance and Care

Caution: Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.

Check the carbon brushes
The carbon brush is a vulnerable part. Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. Keep the carbon brushes clean and free to slip in the holders. Both carbon brushes should be replaced at the same time.

Replace the Carbon Brushes
Use a screwdriver to remove the brush cover, take out the worn carbon bush and replace a new one, and then tighten the brush cover securely.

The air inlet and air outlet of the tool should be cleaned regularly or at any time when it is blocked.
If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent in order to avoid a safety hazard.

EXPLANATION OF GENERAL VIEW

sales@gazelleindustrial.com
www.gazelleindustrial.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>