GAZELLE GM4535 High Power Chop Saw User Manual

GAZELLE GM4535 High Power Chop Saw

Specifications

• Model: GM4535
• Product: Electric Cut-Off Machine

Product Information

The GM4535 Electric Cut-Off Machine is a versatile power tool designed for various cutting applications. It comes with different battery pack configurations to suit different user needs.

Product Usage Instructions

Work Area Safety

• a) Keep your work area clean and well-lit to prevent accidents.
• b) Avoid operating the power tool in explosive atmospheres.
• c) Ensure children and bystanders are at a safe distance during the operation.

Electrical Safety

• a) Always match power tool plugs with the outlet to prevent electrical hazards.

Personal Safety

• a) Stay alert and avoid operating the tool when tired or under the influence of substances.
• b) Wear appropriate personal protective equipment such as eye protection and hearing protection.
• c) Ensure the power tool switch is off before connecting to a power source or battery pack.

Power Tool Use and Care

• a) Use the correct power tool for your application to ensure safe and efficient operation.
• b) Do not use the power tool if the switch malfunctions; have it repaired immediately.
• c) Disconnect the plug or remove the battery pack before making adjustments or storing the tool.
• d) Store the power tool out of reach of children and untrained individuals.
• e) Regularly maintain and inspect the power tool for any damage or misalignment.

Service

• a) Have your power tool serviced by a qualified professional using only genuine replacement parts.

Frequently Asked Questions

Q: Can I use the GM4535 Electric Cut-Off Machine for cutting metal?

A: Yes, the GM4535 is suitable for cutting various materials including metal. Make sure to use the appropriate blade for metal cutting.

Q: How often should I replace the battery pack?

A: Battery pack replacement frequency depends on usage. Replace it when you notice a significant decrease in performance or if it no longer holds a charge effectively.

General power tool safety warnings

• WARNING Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
• Save all warnings and instructions for future reference.
• The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

1. Work area safety
   • a) Keep the work area clean and well-lit. Cluttered ordinary areas invite accidents.
   • b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks that may ignite the dust or fumes.
   • c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
2. Electrical safety
   • a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
   • b) Avoid body contact with earthed or ground surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
   • c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
   • d) Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
   • e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
   • f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. The use of an RCD reduces the risk of electric shock.
3. Personal safety
   • a) Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
   • b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
   • c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to a power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
   • d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
   • e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
   • f) Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
   • g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. The use of dust collection can reduce dust-related hazards.
   • h) Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
4. Power tool use and care
   • a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
   • b) Do not use the power tool if the switch does not turn on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
   • c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
   • d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
   • e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation.
   • If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
   • f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
   • g) Use the power tool, accessories tool bits, etc. under these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
   • h) Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Service
   • a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Safety instructions for cut-off machines

1. Cut-off machine safety warnings

   • a) Position yourself and bystanders away from the plane of the rotating wheel. The guard helps to protect the operalor from broken wheel fragments and accidental contact with the wheel

   • b) Use only bonded reinforced or diamond cut-off wheels for your power tool. Just because an accessory can be attached to your power tool, it does not assure safe operation.

   • NOTE 1 The wording “bonded reinforced” or diamond “is used as applicable depending on the designation of the tool.

   • c) The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.

   • d) Wheels must be used only for recommended applications.

   • For example: do not grind with the side of a cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.

   • e) Always use undamaged wheel flanges that are of the correct diameter for your selected wheel
     Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage.

   • f) The outside diameter and the thickness of your accessory must be within the capacity rating ot your power tool. incorrectly sized accessories cannot be adequately guarded or controlled.

   • g) The arbor size of wheels and flanges must properly fit the spindle of the power tool.

   • Wheels and flanges with arbor holes that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively, and may cause loss of control.

   • h) Do not use damaged wheels. Before each use, inspect the wheels for chips and cracks. If the power tool or wheel is dropped, inspect for damage or install an undamaged wheel. After inspecting and installing the wheel, position yourself and bystanders away from the plane of the rotating wheel and run the power tool at maximum no-load speed for one minute. Damaged wheels will normally break apart during this test time.

   • i) Wear personal protective equipment. Depending on the application, use a face shield, safety goggles, or safety glasses.

   • As appropriate, wear a dust mask, hearing protectors, gloves, and shop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high-intensity noise may cause hearing loss.

   • j) Keep bystanders a safe distance away from the work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or a broken wheel may fly away and cause injury beyond the immediate area of operation.

   • k) Position the cord clear of the spinning accessory. if you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning wheel.

   • l) Regularly clean the power tool’s air vents. The motor’s fan can draw dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.

   • m) Do not operate the power tool near flammable materials. Do not operate the power tool while placed on a combustible surface such as wood. Sparks could ignite these materials.

   • n) Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.

   • NOTE 2 The above warning does not apply to power tools specifically designed for use with a liquid system.

2. Kickback and related warnings

   • Kickback is a sudden reaction to a pinched or snagged rotating wheel. Pinching or snagging causes rapid stalling of the rotating wheel which in turn, causes the uncontrolled cutting unit to be forced upwards toward the operator.

   • For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. Abrasive wheels may also break under these conditions.
     Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.

   • a ) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. The operator can control upward kickback forces if proper precautions are taken.

   • b) Do not position your body in line with the rotating wheel. If kickback occurs, It will propel the cutting unit upwards toward the operator.

   • c) Do not attach a saw chain or woodcarving blade. segmented diamond wheel with a peripheral gap greater than 10 mm or toothed saw blade. Such blades create frequent kickbacks and loss of control.

   • d) Do not ” jam ” the wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.

   • e) When the wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the cutting unit motionless until the wheel comes to a complete stop. Never attempt to remove the wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheel binding.

   • f) Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully re-enter the cut. The wheel may bind, walk up, or kick back if the power tool is restarted in the workpiece.

   • g) Support any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their weight. Supports must be placed under the workpiece near the line of cut and the edge of the workplace on both sides of the wheel.

UK power plug warnings:

Your product is fitted with a BS 1363-1 approved electric plug with an internal fuse approved to BS 1362. If the plug is not suitable for your socket, it should be removed and an appropriate plug should be fitted in its place by an authorized customer service agent. The replacement plug should have the same frustration as the original plug. The severed plug must be disposed of to avoid possible shock hazards and should never be inserted into a mains socket elsewhere.

Symbol

• WARNING
• To reduce the risk of injury, the user must read an instruction manual
• Always wear eye protection

Technical Data

Due to the continuing program of research and development, the specifications herein are subject to change without prior notice.

Function Description

Cautions

1. Power Voltage
   • Before connecting the machine to a power source (receptacle, outlet, etc.), be sure the voltage supplied is the same as that specified on the nameplate of the machine.
2. Protective Earthing Conductor
   • The machine must be grounded to prevent the operator from electric shock, and it is equipped with a standard three-wire and grounding-type receptacle to adapt to the normal grounding receptacle.
   • The green and yellow cable is known as the earth wire. Do not connect it to the live wire.
3. Switch
   • To avoid an accident, always be sure that the tool is switched OFF before plugging in.
4. Extension Cable
   • If the extension cable is far away from the power supply, an outdoor-specific extension cable with sufficient capacity should be used.
   • A cable with a small capacity will lead to a decrease in voltage, resulting in damage to the cable.
   • Always be sure that the extension cable is in good condition before use.
   • Be sure to keep the cable away from the working area and in a proper location, so as not to cut the cable or be entangled by the wheel during work, resulting in cable damage or accidents.

Cutting Operation

1. Hold the handle firmly. Switch on the machine and wait until the wheel attains full speed before lowering gently into the cut.
2. When the wheel contacts the workpiece, gradually bear down on the handle to perform the cut.
3. When the cut is completed, switch off the machine and wait until the wheel has come to a complete stop before returning the handle to the fully elevated position.
4. It’s dangerous for you to remove or install the cutting material when the wheel is rotating.

Installing or Removing the Wheel

• Mount the inner flange onto the spindle and fit the wheel over the inner flange, then fit the outer flange and the washer onto the spindle in turn.
• Push in the stopper pin and secure the hex. bolt with a socket wrench. Follow the installing procedures in reverse to remove the wheel.
• Caution: Always be sure that the machine is switched OFF and unplugged before installing or removing the wheel. Please tighten the hex bolt securely to avoid severe injury.
• Be sure to pull out the stopper pin after installing the wheel or before switching on the machine.

1. Drive Spindle
2. Stopper Pin
3. Inner Flange
4. Outer Flange
5. Hex. Bolt
6. Socket Wrench
7. Wheel
8. Washer

Adjusting the Vise

• The maximum angle of the vise is 45°.
• To change the cutting angle, first, loosen the two bolts of the vise (A), and then slide vise (A) forward or backward to the desired location, and securely tighten the bolts.

1. Bolts
2. Direction A
3. Direction B
4. Vise A

Spacer Block

When the cut-off wheel has worn down and become smaller, you can use a spacer block which is slightly narrower than the workpiece as shown in the figure to utilize the wheel economically.

1. Diameter of Workpiece
2. Stationary Vise A
3. Spacer Block
4. Width of Spacer Block
5. Adjustable Vise B

Movement of the stationary vise (A)

• When the product leaves the factory, the maximum opening size of the vise is 156mm.
• When you need to increase the size, you can loosen the two fixing bolts and move the vise (A) along the opening position on the base. At this time, the opening size of the vise can be adjusted to 191mm.

1. The opening size of the vise can be adjusted to 191mm
2. Bolts

Movement of the adjustable vise (B)

• To lock work, push the screw rod toward work until the vise (B) is in contact with the workpiece, lower the quick-release lever, and turn the crank to tighten.
• To release the work, turn the crank to loosen vise (B), lift the quick-release lever, and pull the screw shaft away from the work.

1. Forward Direction of Screw Rod
2. Backward Direction of Screw Rod
3. Quick Release Lever
4. Screw Rod Base

Lock Chain

• Fix the machine for easily moving and storing. Lower the handle to the position where you can attach the lock chain to the hook on the handle.
• Lower the handle and release the lock chain from the hook before putting the machine into use.

1. Lock Chain

Spark Guard

A spark guard is equipped for this machine to avoid many sparks flying around in operation. Loosen the screw on the bracket and adjust the spark guard to a position at which minimum sparks will fly around.

1. Spark Guard
2. Screw

Cutting Long Workpieces

The long workpiece must be supported by blocks of non-flammable material on either end so that it will be level with the base top.

1. Blocks

Cutting at an Angle

When cutting a workpiece over 65mm wide at an angle, attach a straight piece of wood (spacer) over 190mm long and 45mm wide to the guide plate as shown in the figure. Attach this spacer with screws through the holes in the guide plate.

1. Guide Plate
2. Straight Piece Of Wood (Spacer)
3. Over 45mm Wide
4. Over 45mm Wide
5. Over 190mm Long

Switch Action

To start the tool, simply pull the switch button. Release the button to stop. For continuous operation, pull the button and then push the lock button. To stop the tool from the locked position, pull the button fully and then release it.

1. Lock Button
2. Switch Button

Wood Block

• When the cut-off wheel has worn down considerably, use a spacer block of sturdy, non-flammable material behind the workpiece as shown in the figure.
• You can more efficiently utilize the worn wheel by using the midpoint on the periphery of the wheel to cut the workpiece.

1. Wood Block

MAINTENANCE AND INSPECTION

• CAUTION: Always be sure that the machine is switched off and unplugged before attempting to perform inspection or maintenance.
• Changing Cut-off Wheel
  • When the cut-off wheel has worn down considerably and results in reduced efficiency, replace it with a new one immediately.
• Inspecting the Mounting Screws
  • Regularly inspect all mounting screws and ensure that they are properly tightened. Should any of the screws be loose, retighten them immediately. Failure to do so could result in serious hazards.
• After Use
  • Disconnect the machine after operation and store it out of reach of children. Brush off the accumulation of dust on the base.
• Lubrication
  • To prolong the service life of this machine, lubricate the machine’s active parts every month (refer to the name of each part).

1. Spinning Part Between Bracket and Clevis Pin with Head
2. Screw Rod
3. Moving Part of Vise (B)

Replacing Carbon Brushes

Use a screwdriver to remove the brush holder caps, take out the worn carbon brushes, insert the new ones, and secure the brush holder caps.

1. Screwdriver
2. Brush Holder Cap

• Remove and check the carbon brushes regularly. Replace them when they wear down to the limit mark.
• Keep the carbon brushes clean and free to slip into the holders. Both carbon brushes should be replaced at the same time.

1. Limit Mark

If the replacement of the supply cord is necessary, this has to be done by the manufacturer or his agent to avoid a safety hazard.

Environmental Protection Waste Disposal

The damaged tools, accessories, and waste package materials should be sorted for eco-friendly recycling and under local laws.

EXPLANATION OF GENERAL VIEW

Screw ST4×22
15| Baffle Plate| 35A| Pan Head Tapping Screw ST4×18
16| Ball Bearing 6200ZZ| 36| Left –half Handle Set
17| Rubber Pin| 37| Nameplate
18| Armature Assembly| 37A| Label
19| Ball Bearing 6202ZZ| 38| Pan Head Screw M5×10 (with Spring and Flat Washer)
20| O Ring| 39| Switch
21| Wave Washer| 40| Right-half Handle Set
22| Gear Housing Cover| 41| Pan Head Screw M5×52 (with Spring and Flat Washer)
23| Lever| 42| Pan Head Screw M5×30 (with Spring and Flat Washer)
24| Compression Spring| 43| Pan Head Screw M5×10 (with Spring and Flat Washer)
44| Rear Cover| 72| Hex. Lock Nut M6
---|---|---|---
45| Hex. Socket Head Screw with Flat Point M5×8| 73| Lock Nut M16
46| Carbon Brush Holder| 861| Wrench
47| Carbon Brush| |
48| Brush Holder Cap| |
49| Motor Housing| |
50| Adjusting Bolt M6×20| |
51| Hex. Lock Nut M6| |
52| Pan Head Tapping Screw ST4×16| |
53| Strain Relief| |
54| Insulation Washer| |
55| Cord Guard| |
56| Cord| |
57| Nut M5| |
59| Torsion Spring| |
60| Base Assembly| |
66| Hex. Bolt M16×170| |
67| Washer| |
68| Shaft| |
70| Pan Head Screw M8×10| |
71| Spark Guard| |

sales@gazelleindustrial.com
www.gazelleindustrial.com

Documents / Resources

| GAZELLE GM4535 High Power Chop Saw [pdf] User Manual
GM4535 High Power Chop Saw, High Power Chop Saw, Power Chop Saw, Chop Saw, Saw
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>