V I V O DESK-V000VCE Black Electric Desk Riser Instruction Manual
- May 21, 2024
- V I V O
Table of Contents
Black Electric Desk Riser
Instruction Manual
SKU: DESK-V000VCE
DESK-V000VCE Black Electric Desk Riser
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-
v000ce
WARNING!
If you do not understand these directions, or if you have any doubts about the
safety of the installation, please call a qualified technician. Check
carefully to make sure there are no missing or defective parts. Improper
installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual and do not exceed
weight capacity. We cannot be liable for damage or injury caused by improper
mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
TOOLS NEEDED
WARNING
PINCH POINT
DO NOT piace hands on or near support bars. Moving parts can crush and cut.
Pinch points are created curing lifting and lowering tne worksurface. Failure
to fo’iow these instructions may result in serious personal injury.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Carefully remove Desktop (A) from packaging and set it on a flat surface.
STEP 2
Flip the Desktop (A) upside down, then attach the Extended Feet (B) to the
frame using M5x10mm Screws (S-A).
STEP 3
Connect the Power Cord (G) to the Desktop (A). Plug the cord into the wall and
press the switch on the right side to raise the desktop.
STEP 4
Mount the Keyboard Brackets (F) to the Keyboard Tray (E) using M5x10 Screws
(S-A) with a Phillips screwdriver.
STEP 5
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to
secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not
towards the inside of the desk.
STEP 6
Place monitor, laptop and other items on desk surface.
STEP 7
Attach Cable Clips (C) to desk to manage keyboard and mouse cables.
STEP 8
Manage cables using the zip ties (E).
CAUTION
| 
---|---
Keep monitor and laptop base fully on the desktop.| Follow the cable routing
instructions to avoid the potential to pinch cables.
| 
Leave enough slack in cable to allow for full range of vertical motion (15” /
38cm).| Raise desktop slowly to keep items stable.
Failure to follow these instructions may result in property damage and/or personal injury.
** Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response
times. If any parts are received damaged or defective, please contact us. We
are happy to replace parts to ensure you have a fully functioning product.
[email protected]
AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
**309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-
us.com
LAST UPDATED: 09/28/2022
REV2
References
- Register a .US.COM domain today!
- VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
- 43" Electric Standing Desk Converter – VIVO - desk solutions, screen mounting, and more