WOODWAY ProSmart BIOS 1.90 Update Installation Guide
- June 1, 2024
- Woodway
Table of Contents
WOODWAY ProSmart BIOS 1.90 Update
Specifications
- Manufacturer: WOODWAY USA, Inc.
- Model: ProSmart BIOS 1.90
- Update: 03/2017
- European Representative: WOODWAY GmbH, Germany
- USA Office: W229 N591 Foster Ct. Waukesha, WI 53186 USA
Product Usage Instructions
Introduction
The ProSmart BIOS 1.90 Update is designed to enhance the functionality of
your device. Follow the steps below for a successful update.
Materials
Ensure you have the following items:
- USB Keyboard
- USB Hub
- BIOS USB Drive
Tools
You will need:
- Phillips head screwdriver No.1
- Screw gun
Preparation
Hidden USB Cable
- Remove the (2) screws on the front USB port.
- Carefully pull the cable through the opening.
- If there is a USB extension cable, skip to Section 3; if not, continue to Step 4.
- Remove the back of the head.
NOTE: Do not remove the white Samsung flash drive!
- Plug the USB hub into the open port.
BIOS Update
Updating the BIOS
- Plug the USB hub into the hidden USB cable or the USB hub.
- Turn the treadmill OFF then back ON.
- Press F12 REPEATEDLY on the keyboard immediately after powered back ON. If successful, the screen will read F12 is pressed. Go to Boot Manager.
If the Woodway logo pops up, the Boot Manager window was missed. The system must be restarted again.
- Select EFI USB Device (Generic Flash Disk) from the boot manager screen.
NOTE: Do not press any keys. A key press will disrupt the BIOS flashing process. If a key is hit, restart from Step 1.
DO NOT UNPLUG THE MACHINE AT ANY POINT IN THIS PROCESS.
- After the machine reboots, the BIOS upgrade is complete.
FAQ
Q: What should I do if the BIOS update fails?
A: If the BIOS update fails, restart the process from the beginning and
ensure all steps are followed precisely without interruptions.
ProSmart BIOS 1.90 Update
Installation Manual
03/2017
European Representative
- WOODWAY GmbH
- Steinackerstr. 20
- 79576 Weil am Rhein
- Germany
- WOODWAY USA, Inc.
- W229 N591 Foster Ct.
- Waukesha, WI 53186
- USA
- Tel.: + 49 (0) 7621-940 999-0
- Fax.: + 49 (0) 7621-940 999-40
- E-mail: [email protected]
Manufacturer
Web: www.WOODWAY.de
Tel.: 1-262-548-6235
Fax.: 1-262-522-6235
E-mail: [email protected]
Web: www.WOODWAY.com
Introduction
Materials
QUANTITY DESCRIPTION
| 1 | USB Keyboard |
|---|---|
| 1 | USB Hub |
| 1 | BIOS USB Drive |
Tools
- Phillips head screwdriver No.1
- Screw gun
Preparation
Hidden USB Cable
-
Remove the (2) screws on the front USB port
-
CAREFULLY pull the cable through the opening.
-
If there is a USB extension cable skip to Section 3, if not continue to Step 4
-
Remove the back of the head.
NOTE
DO NOT REMOVE THE WHITE SAMSUNG FLASH DRIVE! Shown by the Red arrow below. -
Plug the USB hub in to the open port (blue arrow).
BIOS Update
Updating the BIOS
-
Plug the USB hub into the hidden USB cable or the USB hub
-
Turn the treadmill OFF then back ON.
-
Press F12 REPEATEDLY on the keyboard immediately after powered back ON. If successful, the screen will read “F12 is pressed. Go to Boot Manager.”
-
If the Woodway logo pops up the Boot Manager window was missed. The system must be restarted again.
-
Select “EFI USB Device (Generic Flash Disk)” from the boot manager screen.
NOTE
Do not press any keys. A key press will disrupt the BIOS flashing process. If a key is hit restart from Step 1. If successful the process with proceed to the following screen. DO NOT UNPLUG THE MACHINE AT ANY POINT IN THIS PROCESS.
-
After the machine reboots the BIOS upgrade is complete.
3-8 | M S – 0 5 – E N – 0 0