HOERMANN STA 90 One Way Light Barrier Instruction Manual

HOERMANN STA 90 One Way Light Barrier

Specifications

• Product Name: One-way Photocell EL 71-B
• Maximum Range: 20m
• Power Supply: 12-24 V~ / 12-24 V
• Battery Type: 3V CR2 Lithium Battery
• Cable Cross-Section: Max. 0.5 mm2

FAQs

• Q: What should I do if the LED indicator shows a fast blinking pattern?
  • A: A fast blinking LED indicates a low battery or obstruction in the photocell’s path. Replace the battery or clear the obstruction as necessary.
• Q: Can I use a different type of battery than the recommended CR2 Lithium battery?
  • A: No, using a different battery type may pose a risk of explosion. Always use the specified CR2 Lithium battery.
• Q: How far can the One-way Photocell EL 71-B detect objects?
  • A: The maximum detection range of the One-way Photocell EL 71-B is 20 meters.

Fitting

See figure 1

Installation

See figures 2 – 9

• Cable cross-section max. 0.5 mm2

To operate the transmitter (TX), use:

• 12-24 V~ / 12-24 V– or
• 3 V battery (CR2)

Inserting the battery
3 V battery, type: CR2 BG1, lithium

WARNING

• Risk of explosion due to incorrect battery type
  • There is the risk of explosion if the batteries are replaced with an incorrect battery type.
  • Only use the recommended battery type.

LED display

Programming

Selecting the channel is necessary to ensure proper operation.

1. Insert the battery in the transmitter (TX).
   • The LED DL2 flashes slowly 1 ×.
2. Press the P1 button until the LED DL2 flashes.
   • The display corresponds to the set channel.
   • Depending on the channel, the display is repeated 4 – 8 ×. During this time the channel can be changed.
3. Press the P1 button repeatedly until the desired channel is set.
   • The LED DL2 flashes according to the new set channel.
   • Depending on the channel, the display is repeated 4 – 8 ×.
   • If the LED DL2 flashes 1 × slowly, the new channel is saved.
4. Repeat the process on the receiver (RX). Set the same channel as on the transmitter (TX).

NOTE: If multiple photocell pairs are being used, program a different channel for each photocell pair.

Disposal

• Dispose of the packaging sorted by materials.
• Electrical and electronic devices must be returned to the appropriate recycling facilities.
• Dispose of the batteries separately. Each consumer is legally required to leave batteries at a collection point in their community, their district, or with a trader.

Technical data

Connecting voltage| 12 – 24 V~ / 12 – 24 V– / 3 V battery, type: CR2 BG1, lithium
---|---
Power consumption| Tx = 40μA battery, Rx = 30mA
Protection category| IP 54
Operating temperature| –20°C – +55°C
Alignment| Automatic
Nominal range| 20 m (with connection cable) 10 m (with battery)
Horizontal mechanical adjustment angle| –90° / +90°
Vertical optical self-adjustment angle| ±7° (20 m) ±13.5° (5 m)
Technology| Relay – N.C.

EU and UK Declaration of Conformity

• Hörmann KG Verkaufsgesellschaft and Hörmann UK Ltd. herewith declare that the One-way photocell EL 71-B complies with the EU Directive 2014/30/EU and the UK Regulations 2016 No. 1091.
• The complete text of the EU Declaration of Conformity and the UK Declaration of Conformity can be found on the following website:
• www.hoermann-docs.com/314745.

Dissemination as well as duplication of this document and the use and communication of its content are prohibited unless explicitly permitted. Noncompliance will result in damage compensation obligations. All rights reserved in the event of patent, utility model or design model registration. Subject to changes.

• HÖRMANN KG Verkaufsgesellschaft
• Upheider Weg 94-98
• 33803 Steinhagen
• Deutschland

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>