BONADUO Qrunning Smart Watch User Guide

BONADUO Qrunning Smart Watch

Appearance

1. Back/ON/OFF
2. MIC
3. Multi-function knob button
4. Strap groove
5. Charging Port
6. Heart rate
7. Speaker

Charge & Power on

*Please use Charger made by Manufacturer approved by Nation

How to wear

Wear watch on your wrist by with suitable tightness.

APP installation & Connecting

Android/lOS
Android 5.0 and above IOS 9.0 and above
Bluetooth 4.0 support.

QRunning
First use.pls connect watch with APP by Bluetooth. Make “Bluetooth” working in the mobile phone system- enter APP device settingsclick on the “settings” list and find watch device to connect it. “+” icon to search bluetooth devices.

When connecting bluetooth, please turn on the Bluetooth switch of the wristband. Connect in the bluetooth of the mobile phone system for pairing.

Note: The APP is only connected to the Bluetooth 4.0 function, and can only perform data interaction with the Hand. t cannot perform music playback and use the voice call function. You need to connect to the Bluetooth 3.0 function to use it. The Bluetooth 3.0 connection method needs to be read carefully after the APP connection is completed.

Operations

Buttons:

1. The rotary encoder can switch the dial.
2. Up button:
   • long press: power on and off
   • Single press: the screen saver pointer and dial switch naturally, and the screen will automatically turn off after 15 seconds;
   • Double press: enter the menu, and after entering the menu, double press to switch styles.
3. Down key: single press: switch back and forth between sports mode and dial.
   Single press: any interface returns to the watch face.

Touch Panel:

• Swipe up: view messages;
• Swipe down: enter the shortcut menu
• Left swipe: heart rate, blood oxygen, blood pressure, pedometer and other shortcut menus;
• Right swipe: sidebar;

Buttons:

• Long Press for 3 seconds to
• Power ON/Power OFF.
• Short press to back main interface.
• Dark screen by short press from “Clock Dial interface”

Touch Panel:

• At main menu:
  • Touch UP to display Mobile notifications.
  • Touch down to entry shortcut menu.
  • Touch left&right to change “Clock dial” .
  • Touch to entry function list”
  • At function menu: Touch left to change the sub-menu.
  • Touch right to be back preview menu.

Attention

What shouldI do if Bluetooth cannot be connected? (Failed to connect/reconnect or slow connection/ reconnect)

1. Please confirm whether the mobile phone supports (IOS9.0 or Android 4.2 or above, mobile phones or tablet products with Bluetooth 4.0)
2. Due to the problem of signal interference in the Bluetooth wireless connection, the connection time may be different every time. If you cannot connect for a long time, please make sure to connect in a place where there is no magnetic field or too much Bluetooth device interference.
3. Turn off the phone’s Bluetooth and then turn it on
4. Clear the phone background application or restart the phone
5. Do not connect your phone to other products of the same type at the same time
6. Whether the APP is still running in the background, if it is not running in the background, it cannot be connected

Can’t find the Hand?
Because the Bluetooth radio of the Hand is not searched by the mobile phone, please make sure that the Hand is powered on and activated, and it is not connected to other mobile phones. Put the Hand close to the mobile phone and search again. If it is still invalid, turn off the Bluetooth of the mobile phone for 20 seconds Then restart Bluetooth and search again.

Should the Bluetooth connection be always on? Will there be any data if it is closed?
Before synchronizing the data, exercise and sleep data will be kept on the wristband host. When the mobile phone and the Hand Bluetooth are successtully connected, the Hand will automatically, upload data to the mobile phone, but the data stored by the Hand is limited, and only about one week of Bluetooth data can be stored. When the space is full, the earliest data will be automatically overwritten to generate the latest data, So please sync the Hand to your phone in time.
Remarks: If you turn on the incoming call and SMS reminder function, you need to keep Bluetooth connected, and the alarm reminder supports offline.

What should I do if the Hand cannot be charged?

1. Please confirm whether the direction of the charging stand is correct and whether the charging clip is in good contact with the Hand.
2. When the Hand power is lower than 3.6V, there will be a period of battery precharge time Remarks: After plugging in the charger, it will immediately enter the charging state. If there is no display, it will take 3-5 minutes to enter the charging state.

Will wearing the Hand for a long time cause harm to the human body?
The radiation of the equipment is far lower than the FCC standard of the United States, and it is basically negligible

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>