LUCAS LED CH21 Led Moving Head Wash 12x40W Bee Eye User Manual

: August 14, 2024
: LUCAS LED

Table of Contents

LUCAS LED CH21 Led Moving Head Wash 12x40W Bee Eye
Product Usage Instructions
Safety Instructions
Technical Specifications
How To Control The Unit
LUXDate
Shape
Troubleshooting
Fixture Cleaning
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LUCAS LED CH21 Led Moving Head Wash 12x40W Bee Eye

Specifications:

Control DMX Channel: 21/25/33/81 Channel
Control Modes: DMX512/Master-Slave/Auto Run/Music

Product Usage Instructions

Safety Instructions

Keep the user guide for future reference.
Ensure no transportation damage before use.
Check voltage and frequency compatibility with power supply.
Ground the yellow/green conductor to earth to avoid electric shock.
Indoor use only in a dry location with adequate ventilation.
Avoid flammable materials close to the unit.
Use safety cable for fixing the unit.
Avoid handling the unit by the head, always hold it by the base.
Maximum ambient temperature is Ta: 40. Do not operate above this temperature.
If serious operating problems occur, stop using the unit and contact authorized technical assistance.
Avoid touching wires during operation to prevent electric shock.

How To Control The Unit

To control the unit, use the following functions on the display:

Menu: Select programming functions
DOWN: Move backward in selected functions
UP: Move forward in selected functions
ENTER: Confirm selected functions

Setting DMX Address Code:

Press Menu to Set DMX Address, then press ENTER to enter.
Show Set DMX Address DMX Address:001. Use UP and DOWN keys to amend.
Press ENTER to save and Exit. MENU does not save and Exit.

statement

The product has well capability and intact packing when leave factory. All of the user should comply with warning item and manual, any misuse cause of the damages are not included in our guarantee, and also can’t be responsible for any malfunction & problem owing to ignore the manual.

Safety Instructions

Please keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the unit.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
The unit is for indoor use only. Use only in a dry location.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent surfaces. Be sure that no ventilation slots are blocked.
Disconnect main power before replacement or servicing.
Make sure there are no flammable materials close to the unit while operating as it is fire hazard.
Use safety cable when fixes this unit. Do not handle the unit by taking its head only, but always by taking its base.
Maximum ambient temperature is Ta: 40℃. Do not operate it where the temperature is higher than this Unit surface temperature may reach up to 85℃. Do not touch the housing bare-hand during its operation. Turn off the power and allow about 15 minutes for the unit to cool down before replacing or serving.
In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
Always use the same type spare parts.
Do not touch any wire during operation as high voltage might be causing electric shock.

Warning:
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture.

Do not open the unit within five minutes after switching off.
The housing, the lenses, or the ultraviolet filter must be replaced if they are visibly damaged.

Caution:
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer.

Installation:
The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating. And make sure that the structure to which you are attaching the unit is secure and is able to support a weight of 10 times of the unit’s weight. Also always use a safety cable that can hold 12 times of the weight of the unit when installing the fixture.
The equipment must be fixed by professionals. And it must be fixed at a place where is out of the touch of people.

Technical Specifications

Light Sources: 12 x 40W 4in1 RGBW LED
Beam Angle: 3.5°~ 45°
Power Consumption: 400W
Power Voltage: AC 100-240V, 50/60Hz
Dimension: 324x240x377mm
Net Weight: 9.5Kgs
Packing size: 400x310x430mm

Control

DMX Channel: 21/25/33/81 Channel
Control Modes: DMX512/mater-Slave/Auto Run/Music

Pan/Tilt

Pan/Tilt: 540°or 360°in optional / 270°
Pan/Tilt Resolution: 8/16 bit

Construction

Display: 1.8 TFT colorful Display
Data In/Out socket: 3-pin & 5-pin XLR sockets
Power Socket: Power Con in/out
Protection Rating: IP20

Features
LED single control, can display arrows, numbers, letters and patterns

High-efficiency optical system
Outstanding color macro effect
Dimmer: 0~100% smooth dimming
Variable strobe effects
Fast, quiet operation and flicker free

How To Control The Unit

Display:

MENU To select the programming functions
DOWN To go backward in the selected functions
UP To go forward in the selected functions
ENTER To confirm the selected functions

SetDMX Address Code

Press “Menu” to “Set DMX Address”, and press “ENTER” keys to enter into
Show “Set DMX Address DMX Address:001”, Press the “UP and DOWN” keys to amended
Press “ENTER” keys to save and Exit, Press the “MENU” Keys does not save and Exit

Menu

|

1.Pan Degree

| 1.540
---|---|---
2.360
2.Mic Sense| 001–100| Sound control adjust sensitiveness
3.Language| 1.English
2.Chinese
4.No Signal| 1.Black Out
2.Hold

5. Fan Set

| 1. Auto
2. Low
3. High
6.Reset| 1.Yes
2.No
9.Default| 1.Yes
2.No

10.Adjust

Change the value, adjust the white balance

6.Green
7.Blue
8.White
Address| Set address code 001–512
Reverse| 1.Pan| 1.Yes
| | 2.No
---|---|---
2.Tilt| 1.Yes
2.No
3.Display| 1.Yes
2.No

Inform

| 1.CH Value| display all channel values
2.Temp/℃| display led board temperature
3.Soft v.xxx| software version number

Mode

| 1.DMX512

2.Auto

| 1.Master
2.Alone

3.Sound

| 1.Master
2.Alone

4.Manual

|

Master

| 1.Pan:0–255
2.Tilt:0–255
3.Focus）:0–255
4.Rota:0-255
5.Red：0–255

Alone

| 6.Greed：0–255
7.Bule：0–255
8.White：0–255
9. Strobe：0-255
Channel| 1.21Channels
| 2.25Channels
---|---
3.33Channels
4.81Channels

DMX channel´s functions and values (21/25/35/81DMX channels):

Model 1 – CH21

Channel	Display	Function	Value
CH-1	Red	From dark to bright	0 — 255
CH-2	Red fine	Red fine adjustment	0 — 255
CH-3	Green	From dark to bright	0 — 255
CH-4	Green fine	Green fine adjustment	0 — 255
CH-5	Blue	From dark to bright	0 — 255
CH-6	Blue fine	Blue fine adjustment	0 — 255
CH-7	White	From dark to bright	0 — 255
CH-8	White fine	White fine adjustment	0 — 255
CH-9		No function	0—-15
R 100%, G up, B0%	16—-35
R down, G 100%, B0%	36—-55

Color Temperature

| R 0%, G 100%, B up| 56—-75
---|---|---
R 0%, G down, B 100%| 76—-95
R up, G 0%, B100%| 96—-115
R 100%, G 0%, B down| 116—-135
R 100%, G up, B up| 136—-155
R down, G down, B 100%| 156—-175
R100%G100%B100%W100

%

| 176—-195
2800K| 196—-200
3200K| 201—-205
4000K| 206—-210
4500K| 211—-215
5000K| 216—-220
5600K| 221—-225
6500K| 226—-230
7000K| 231—-235
7500K| 236—-240
8000K| 241—-255

CH-10

| ****

Macro Color

| No function| 0 — 19
Effect -1| 10–19
Effect -2| 20–29
| | 10 numbers 1 effect| ……
---|---|---|---
Effect -24| 240–249
Effect -25| 250 — 255
CH-11| Dimming| From dark to bright| 0 — 255
CH-12| Dimming adjustment| Dimming fine adjustment| 0 — 255

CH-13

| ****

Strobe

CH-19

| ****

Lens rotation

| 0~60°| 0-155
Clockwise infinite rotation| 156-205
Counterclockwise rotation| 206-255

CH-20

| ****

Dimming Mode

CH-21

| ****

Reset

| NO funtion| 0-250
---|---|---|---
Reset within 5s| 251—255

Model 2 – CH25

Channel	Display	Function	Value
CH-1	Pan	Pan control	0 — 255
CH-2	Pan adjustment	Pan fine adjustment	0 — 255
CH-3	Tilt	Tilt control	0 — 255
CH-4	Tilt adjustment	Tilt fine adjustment	0 — 255
CH-5	Pan/Tilt speed	Speed from fast to slow	0 — 255
CH-6	Zoom	Angle from small to large	0 — 255

CH-7

| ****

Lens rotation

| 0~60°| 0-155
Clockwise infinite rotation from fast to slow| 156-205
Counterclockwise rotation from slow to fast| 206-255
CH-8| Dimmer| dark to bright linear dimming| 0 — 255

CH-9

| ****

Strobe

| Turn on the light| 0—3
Synchro strobe speed

From slow to fast (1HZ-25HZ)

| 4—203
| | Random strobe| 204–255
---|---|---|---
CH-10| R dimming| dark to bright linear dimming| 0-255
CH-11| G dimming| dark to bright linear dimming| 0-255
CH-12| B dimming| dark to bright linear dimming| 0-255
CH-13| W dimming| dark to bright linear dimming| 0-255

CH-14

| ****

Color temperature

CH-14

| ****

Color temperature

| 5000K| 216—220
---|---|---|---
5600K| 221—225
6500K| 226–230
7000K| 231–235
7500K| 236–240
8000K| 241–255

CH-15

| ****

Macro color

CH-16

| ****

Static pattern

| No funtion| 0–16
Monochrome pattern 1| 17–33
Monochrome pattern 2| 34–50
………(17 numbers 1 pattern)| …..
Monochrome pattern 9| 153–169
Mixed color pattern 1| 170–186
Mixed color pattern 2| 187–203
Mixed color pattern 3| 204–220
| | Mixed color pattern 4| 221–237
---|---|---|---
Mixed color pattern 5| 238–255

CH-17

| ****

Dynamic pattern

（with 17CH）

| 0-255

CH-19

| ****

Dynamic pattern speed

| No funtion| 0–9
Forward, from fast to slow（with 17CH）| 10–132
Reverse, from slow to fast (with 17CH)| 133–255
CH-20| Back color R| dark to bright linear dimming| 0-255
CH-21| Back color G| dark to bright linear dimming| 0-255
CH-22| Back color B| dark to bright linear dimming| 0-255
---|---|---|---
CH-23| Back color W| dark to bright linear dimming| 0-255

CH-24

| ****

Dimming Mode

CH-25

| ****

Reset

| No funtion| 0-250
Reset within 5s| 251-255

Model 3 – CH33

Channel	Display	Function	Value
CH-1	Pan	Pan control	0 — 255
CH-2	Pan adjustment	Pan fine adjustment	0 — 255
CH-3	Tilt	Tilt control	0 — 255
CH-4	Tilt adjustment	Tilt fine adjustment	0 — 255
CH-5	Pan/Tilt speed	Speed from fast to slow	0 — 255
CH-6	Zoom	Angle from small to large	0 — 255

CH-7

| ****

Lens rotation

| 0~60°| 0-155
Clockwise infinite rotation from fast to slow| 156-205
| | Counterclockwise rotation from slow to fast| 206-255
---|---|---|---
CH-8| Dimmer| dark to bright linear dimming| 0 — 255
CH-9| Dimmer adjustment| Dimming fine adjustment| 0 — 255

CH-10

| ****

Strobe

| Turn on the light| 0—3
Synchro strobe speed

From slow to fast (1HZ-25HZ)

CH-19

| ****

Dimming Mode

| Mode -1| 0 — 49
Mode -2| 50 — 99
| | Mode -3| 100—149
---|---|---|---
Mode -4| 150—255

CH-20

| ****

Color temperature

| No funtion| 0 —15
R 100%, G up, B0%| 16—35
R down, G 100%, B0%| 36—55
R 0%, G 100%, B up| 56—75
R 0%, G down, B 100%| 76—95
R up, G 0%, B100%| 96—115
R 100%, G 0%, B down| 116—135
R 100%, G up, B up| 136—155
R down, G down, B 100%| 156—175
R100%G100%B100%W100%| 176—195
2800K| 196—200
3200K| 201—205
4000K| 206—210
4500K| 211—215
5000K| 216—220
| | 5600K| 221—225
---|---|---|---
6500K| 226–230
7000K| 231–235
7500K| 236–240
8000K| 241–255

CH-21

| ****

Macro color

CH-22

| ****

Static pattern

| No funtion| 0–16
Monochrome pattern 1| 17–33
Monochrome pattern 2| 34–50
………(17 numbers 1 pattern)| …..
Monochrome pattern 9| 153–169
Mixed color pattern 1| 170–186
| | Mixed color pattern 2| 187–203
---|---|---|---
Mixed color pattern 3| 204–220
Mixed color pattern 4| 221–237
Mixed color pattern 5| 238–255

CH-23

| ****

Dynamic pattern

（with 17CH）

| 0-255

CH-25

| ****

Dynamic pattern speed

| No funtion| 0–9
Forward, from fast to slow（with 17CH）| 10–132
Reverse, from slow to fast (with 17CH)| 133–255
CH-26| Pattern fade effect| Pattern effect fade| 0-255
---|---|---|---
CH-27| Background dimming| Background 0-100% dimming| 0-255
CH-29| Back color R| dark to bright linear dimming| 0-255
CH-30| Back color G| dark to bright linear dimming| 0-255
CH-31| Back color B| dark to bright linear dimming| 0-255
CH-32| Back color W| dark to bright linear dimming| 0-255

CH-33

| ****

Reset

| No funtion| 0-250
Reset within 5s| 251-255

Model 4– CH81

Channel	Display	Function	Value
CH-1	Pan	Pan control	0 — 255
CH-2	Pan adjustment	Pan fine adjustment	0 — 255
CH-3	Tilt	Tilt control	0 — 255
CH-4	Tilt adjustment	Tilt fine adjustment	0 — 255
CH-5	Pan/Tilt speed	Speed from fast to slow	0 — 255
CH-6	Zoom	Angle from small to large	0 — 255
CH-7	Lens rotation	0~60°	0-155
	Clockwise infinite rotation from fast to slow	156-205
---	---	---	---
Counterclockwise rotation from slow to fast	206-255
CH-8	Dimmer	dark to bright linear dimming	0 — 255
CH-9	Dimmer adjustment	Dimming fine adjustment	0 — 255

CH-10

| ****

Strobe

| Turn on the light| 0—3
Synchro strobe speed

From slow to fast (1HZ-25HZ)

CH-19

| ****

Dimming Mode

| Mode -1| 0 — 49
Mode -2| 50 — 99
| | Mode -3| 100—149
---|---|---|---
Mode -4| 150—255

CH-20

| ****

Color temperature

| No funtion| 0 —15
R 100%, G up, B0%| 16—35
R down, G 100%, B0%| 36—55
R 0%, G 100%, B up| 56—75
R 0%, G down, B 100%| 76—95
R up, G 0%, B100%| 96—115
R 100%, G 0%, B down| 116—135
R 100%, G up, B up| 136—155
R down, G down, B 100%| 156—175
R100%G100%B100%W100%| 176—195
2800K| 196—200
3200K| 201—205
4000K| 206—210
4500K| 211—215
5000K| 216—220
5600K| 221—225
6500K| 226–230
7000K| 231–235
| | 7500K| 236–240
---|---|---|---
8000K| 241–255

CH-21

| ****

Macro color

CH-22

| ****

Static pattern

CH-23

| ****

Dynamic pattern

| No funtion| 0–9
Monochrome dynamic pattern| 10–13
| | 1|
---|---|---|---
Monochrome dynamic pattern 2| 14–17
……(4 numbers 1 pattern)| …..
Monochrome pattern 46| 190–193
Mixed color dynamic pattern 1| 194–197
Mixed color dynamic pattern 2| 198–201
……..(4 numbers 1 pattern)| ……….
Mixed color dynamic pattern 14| 246–249
Mixed color dynamic pattern 15| 250–255
CH-24| Pattern movement| Choose pattern dynamic scene

（with 23CH）

| 0-255

CH-25

| ****

Dynamic pattern speed

| No funtion| 0–9
Forward, from fast to slow（with 23CH）| 10–132
Reverse, from slow to fast (with 23CH)| 133–255
CH-26| Pattern fade effect| Pattern effect fade| 0-255
CH-27| Background dimming| Background 0-100% dimming| 0-255
CH-29| Back color R| dark to bright linear dimming| 0-255
CH-30| Back color G| dark to bright linear dimming| 0-255
CH-31| Back color B| dark to bright linear dimming| 0-255
---|---|---|---
CH-32| Back color W| dark to bright linear dimming| 0-255

CH-33

| ****

Reset

LUXDate

Shape

Troubleshooting

Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting:

The unit does not work, no light and the fan does not work

Check the connection of power and main fuse.
Measure the mains voltage on the main connector.
Check the power on LED.

Not responding to DMX controller

DMX LED should be on. If not, check DMX connectors, cables to see if link properly.
If the DMX LED is on and no response to the channel, check the address settings and DMX polarity.
If you have intermittent DMX signal problems, check the pins on connectors oron PCB of the unit or the previous one.
Try to use another DMX controller.
Check if the DMX cables run near or run alongside to high voltage cables that may cause damage or interference to DMX interface circuit.

One of the channels is not working well

The stepper motor might be damaged or the cable connected to the PCB is broken.
The motor’s drive IC on the PCB might be out of condition.

Fixture Cleaning

The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.

Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics atleast every 30/60 days.

FAQ:

Q: Can I use the unit outdoors?
A: No, the unit is for indoor use only.

Q: What should I do if the unit overheats?
A: Turn off the power and allow the unit to cool down before servicing.

Q: How many control modes are available?
A: The unit has DMX512, Master-Slave, Auto Run, and Music control modes.

www.lucasled.gr