CLOSETMAID 10000-00831 ProGarage 3 Bike Floor Stand Garage Bike Storage Rack Instruction Manual
- June 12, 2024
- ClosetMaid
Table of Contents
CLOSETMAID 10000-00831 ProGarage 3 Bike Floor Stand Garage Bike Storage
Rack
Product Information
- Product Name: Unknown (Not mentioned in the provided text)
- Manufacturer: Unknown (Not mentioned in the provided text)
- Model Number: 10000-00831
- Date of Manual: 02/22
- Warranty: The manufacturer offers a warranty for thirty days after purchase. They will replace any missing or damaged parts due to manufacturer defects. Customers need to provide proof of purchase for warranty claims. The product should not be returned to the retail store. For product assistance and warranty information, customers can contact Consumer Affairs at 1-800-874-0008.
SAFETY PRECAUTIONS
WARNING
- CHOKING HAZARD FOR SMALL CHILDREN. The unit contains small parts. Children should always be under adult supervision or serious bodily injury could occur. The unit is intended to be assembled by an adult.
- DO NOT OVERLOAD UNIT. If any shelf of the unit bows or bends, it is overloaded. The shelf could collapse and cause serious bodily injury and/or damage to personal belongings.
- DO NOT CLIMB OR STEP ON THE UNIT. The unit may become unstable and either tip over or collapse. Serious bodily injury and/or damage to personal belongings may occur.
- DO NOT HANG THIS UNIT ON THE WALL. The product is not designed for wall hanging. Serious bodily injury and/ or damage to personal belongings may occur.
- ALWAYS UNLOAD UNIT PRIOR TO MOVING THE UNIT. The weight of personal belongings can cause the unit to become unstable, tip-over, or collapse. Serious bodily injury and/or damage to personal belongings may occur.
- WE RECOMMEND YOU ASSEMBLE ON A SOFT SURFACE TO AVOID DAMAGE TO THE UNIT OR WORK SURFACE.
- WE RECOMMEND YOU HAND TIGHTEN SCREWS TO AVOID OVER TIGHTENING WITH POWER TOOLS.
STOP
FOLLOW INSTRUCTIONS CAREFULLY
Manufacturer Warranty
Manufacturer will replace any missing or damaged part due to manufacturer
defect for thirty days after purchase. Please have proof of purchase for
warranty claims. Please do not return product to the retail store. For product
assistance and warranty information please call Consumer Affairs at
1-800-874-0008.
PARTS
HARDWARE PROVIDED
INSTALLATION
Construct frame sides
- Using the 4 mm allen wrench (N), secure the two rear frame bars (A), two front frame bars (B), two upper side frame bars (D), two middle side frame bars (E), and two lower side frame bars (C) with twelve M6 x 25 mm screws (M).
Attach frame sides to horizontal support bars
- Using the 4 mm allen wrench (N), secure the two frame sides to the three horizontal support bars (F) with six M6 x 25 mm screws (M).
Attach lower support bars to horizontal support bars
- Using the 4 mm allen wrench (N), secure the three lower support bars (G) to the horizontal support bars (F) with twelve M6 x 25 mm screws (M).
Attach rear horizontal support bar to frame sides
- Using the 4 mm allen wrench (N), secure the rear horizontal support bar (I) to the frame sides with two M6 x 25 mm screws (M).
Attach vertical support bars to unit
- Using the 4 mm allen wrench (N), secure the six vertical support bars (H) to the horizontal support bar (F) and lower support bars (G) with twelve M6 x 25 mm screws (M).
Attach basket to unit
- Using the 4 mm allen wrench (N), secure the basket (J) to the unit with four M6 x 25 mm screws (M).
Attach adjustable feet to unit
- Twist the four adjustable feet (L) onto the unit. You can adjust the height of the feet to level the unit appropriately to your surface.
Attach hooks to unit
- Place hooks (K) on the upper side frame bars (D) with hook end facing outward.
© 2022 The AMES Companies, Inc. | Orlando, FL 32827 | 1-800-874-0008 | www.closetmaid.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>