CLOSETMAID 4583 8-Cube Storage Organizer Instruction Manual
- June 4, 2024
- ClosetMaid
Table of Contents
CLOSETMAID 4583 8-Cube Storage Organizer
INSTALLATION INSTRUCTIONS
BEFORE BEGINNING
- Please read all instructions carefully.
- Familiarize yourself with all parts (see “PARTS”) and check quantities.
- Follow all safety precautions .
SAFETY PRECAUTIONS
WARNING
-
This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur.
-
Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not overload unit. If any shelf, top, or bottom of unit bows or bends, it
is overloaded. The shelf, top, or bottom could collapse and cause serious bodily injury and/or damage to personal belongings. -
Do not climb or step on the unit.
The unit may become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. -
Do not use this unit as a television stand. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not mount or attach anything to the sides, rear or front of the unit as this can create a force which can cause the unit to tip. Serious bodily injury and/or damage to personal belongings may occur.
-
Do not stack units. Stacking of units can cause an unsafe tip-over hazard which may • cause serious bodily injury and/or damage to personal belongings.
-
Do not hang this unit on the wall. The product structure is not designed for wall • hanging. Serious bodily injury, damage to personal belongings, and/or damage
to the wall may occur. -
Follow proper safety procedures when using power tools and ladders.
-
We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc.
WARNING
All units MUST be fastened to the wall. Serious or fatal crushing injuries can
occur from furniture tip-over. To help prevent tip-over.
- Install tip-over restraint provided.
- Unless specifically designed to accommodate, do not set TVs or other heavy objects on top of this product.
- Never allow children to climb or hang on drawers, doors, or shelves.
- Place heavy items on lower shelves and as far back as possible.
Use of tip-over restraints may only reduce, but not eliminate, the risk of tip-over.
HARDWARE
-
Dowel (H1) x 22
-
Hex Screw (H2) x 8
-
L-Bracket Screw (H3) x 2 #10 x 1/2”
-
Wall Screw (H4) x 2 #10 x 1 1/2”
-
L-Bracket (H5) x 2
-
Hardware Stickers Supplied
-
Allen Wrench Supplied
PRODUCT
- A Side Panel x 2
- B Top and Bottom Panel x 2
- C Divider Panel x 4
- D Fixed Shelf x 3
ASSEMBLY
-
Insert dowels to each divider panel.
Three divider panels (C) should not have dowels on one side
-
Connect each divider and top/bottom panels.
Dowels in panel (C) interlock through panel (D).
-
Secure each side panel and apply hardware stickers.
-
Secure unit to the wall.
L-Bracket must be mounted no more than 1 1/2” from edge of panel.
WARNING
All Units MUST be fastened to a wall.
Instructions:
- Align unit with wall stud.
- Place screw hole end of L-bracket against wall stud. Use 1 1/2” screw to secure L-bracket to wall.
- Use 1/2” screw to secure L-bracket to top panel. L-bracket must be mounted no more than 1 1/2” from edge of panel.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>