CLOSETMAID 10000-00720 ProGarage 4 Bike Wall Mounted Garage Bike Storage Rack Instruction Manual
- October 30, 2023
- ClosetMaid
Table of Contents
CLOSETMAID 10000-00720 ProGarage 4 Bike Wall Mounted Garage Bike Storage
Rack
Product Information
The product is a wall-mounted rail system designed to hold various tools and equipment. The package comes with a rail, double straight hooks, screws, and wall anchors for installation. The maximum weight that the product can hold is not specified. The manufacturer provides a 30-day warranty for any missing or damaged parts due to manufacturer defect. Consumers can contact Consumer Affairs at 1-800-874-0008 for product assistance and warranty information.
Product Usage Instructions
- Choose the desired location for the rail and use a pencil to mark the positions on the wall for the six holes on the rail.
- Drill a 5/16 in. hole at each marked wall location.
- Insert six wall anchors (B) into the drilled holes, then use a #3 Phillips screwdriver to secure the rail (AA) to the wall using six #10 x 1.5 in. screws (A). Make sure the rail is oriented correctly with the hook track channel on top.
- To attach the hooks (BB, CC, and DD) to the rail (AA), place the top curved section of the hook onto the top of the rail and pull downward to secure. Push the hook upward to remove and reposition.
SAFETY PRECAUTIONS
WARNING
- CHOKING HAZARD FOR SMALL CHILDREN. The unit contains small parts. Children should always be under adult supervision or serious bodily injury could occur. The unit is intended to be assembled by an adult.
- DO NOT OVERLOAD UNIT. If any shelf of the unit bows or bends, it is overloaded. The shelf could collapse and cause serious bodily injury and/or damage to personal belongings.
- DO NOT CLIMB OR STEP ON THE UNIT. The unit may become unstable and either tip over or collapse. Serious bodily injury and/or damage to personal belongings may occur.
- WE RECOMMEND YOU HANDTIGHTEN SCREWS TO AVOID OVER TIGHTENING WITH POWER TOOLS WHERE POSSIBLE. IF POWER TOOLS ARE NECESSARY, PLEASE UTILIZE DISCRETION AND USE THE LOWEST TORQUE SETTING NECESSARY FOR ASSEMBLY.
Max Weight:
- 100 lbs./Rail
- 35 lbs./Bicycle Hook
- 40 lbs./Utility Double Straight Hook
- 50 lbs./Helmet Hook
STOP
FOLLOW INSTRUCTIONS CAREFULLY
Manufacturer Warranty
Manufacturer will replace any missing or damaged part due to manufacturer
defect for thirty days after purchase. Please have proof of purchase for
warranty claims.
Please do not return product to the retail store. For product assistance and
warranty information please call Consumer Affairs at 1-800-874-0008.
PARTS
HARDWARE REQUIRED
HARDWARE PROVIDED
STEP 1A
Mark wall and drill holes for concrete mounting
Place the rail (AA) in the desired position and use a pencil to mark the
locations on the wall for the six holes on the rail.
Remove the rail and drill a 5/16 in. hole at each marked wall location. Please
make sure the rail is oriented correctly with the hook track channel on top.
STEP 1A
Insert anchors and secure rail to wall
Insert six concrete anchors (B) into the holes in the wall and use a #3
phillips screwdriver to secure the rail (AA) to the wall with six #10 x 1.5
in. screws (A).
STEP 1B
Secure rail using stud mounting
Locate wall studs, place rail (AA) in desired position, and use a #3 phillips
screwdriver to secure the rail to the studs with six #10 x 1.5 in. screws (A).
Please make sure the rail is oriented correctly with the hook track channel on
top
STEP 2
Attach hooks to rail
To attach the hooks (BB, CC, and DD) to the rail (AA), place the top curved
section of the hook onto the top of the rail and pull downward to secure. Push
the hook upward to remove and reposition.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>