Sinovision Technology SN-S3 Wireless Security Camera Instruction Manual
- June 6, 2024
- Sinovision Technology
Table of Contents
Sinovision Technology SN-S3 Wireless Security Camera
Product categories
Technical Parameters
- Resolution: 720X1280 1920X1080
- Video bitrate: adaptive
- Viewing angle: 135-165°
- Support capacity: Up to 128G
- Audio: Built-in speaker & Microphone
- WiFi Mode: 2.4GHz 802.11n/g/n
- Power Supply: DC 5V
- Battery: Rechargeable
- Battery Motion Detection: PIR Sensor
- Recording method: SD Memory Card/ Cloud Storage
- Power consumption: Standby 200uA, Working 260mA
Tips for use
- This Camera only supported 2.4G WIFI, not supported 5G WIFI .
- Please fully charge the Camera before using it.The charging time is 6- 8 hours.
- Video Camera connection wifi operation guide:
- After the camera is fully charged, please approach the wifi router within 2M when matching the phone and the doorbell.The location where the camera is installed cannot exceed the wifi coverage by 10 meters.
- The App cannot detect whether your password is wrong.When entering the wifi password, please make sure that the password is correct,otherwise the phone will not connect to wifi.
- Router check operation:There are too many clients connected to the router itself,which exceeds the quota limit, resulting in failure to connect, restart the router.
- Register the App with your phone number or email address.
- Allow app Would like to send you Notifcations.
- Allow app to use your location.
- Apple phone users and Android phone users-Registration Process:
- Step 1: Apple phone users-Allow all permissions of the App
- Step 2:
1. Android phone users-Allow camera to take pictures and record video.
2. Allow camera to access this device’s location.
3. Allow camera to access photos and media on your decvice.
4. Allow camera to record audio.
5. Allow camera to access device information.
6. User Agreement and Privacy Policy.
7. Save username and password.
8. Click on- Go to set.
9. Open Manage manually:Auto-launch/Secondary launch/Run in background.
10. Allow permissions are turned on.
11. Allow ignore battery optimizations automatic management.Add Device
- Log in to the APP, click the “+” in the device list, and pop up a window to choose”Add intelligently”.
TF Card Video
Click the “Playback” icon to view the video in the TF card (Note: The device
needs to be plugged in the TF card, the alarm detection is enabled and the
video is recorded before the video file can be found).
Cloud Storage Video
Click the cloud storage function icon in the device list page,Enter the cloud
storage video query and open the purchase page.
Device Sharing
Click the “Share” icon to enter the “Share Management”, click the “Share ”
button, your family can click the “+” APP to select “Scan” to share the device
code, you can view your shared device.
AP Hotspot Mode
Reset the device, open the APP, click “Add Device” and select “AP Mode” to
enter the hotspot connection interface.Click “Next” to enter the mobile phone
WIFI selection page, find the WIFI hotspot named “Onecam-xxxxx” to connect,
(WiFi password: 123456789).
Device Screen List
Basic-setting List
FAQ
- Q: What should I pay attention to before using the product?
- A: When the product is paired, ensure that the distance is within 2 meters of the WiFi signal coverage of the router to add network operations. It is recommended to install the device within 10 meters of the router.
- Q: What should I do if I cannot receive the verification code during email registration?
- A1:Please make sure your email account is entered correctly
- A2:Some mail clients will recognize the verification code as spam, please go to the spam inbox to check whether there is a verification code email.
- Q: Why are there issues with push delay and wake-up delay?
- A1:The product transmits data through a wireless network, and it takes 0-1s to convert and output the data when processing the data, so there will be a 0-1s delay when the product is used. Please use it normally about 5 seconds after the product is successfully connected (operate after the connection is stable).
- A2: If the wifi signal is weak or the mobile phone signal is weak, it may also cause offline and disconnection, and push notification delays. Before buying, check the wifi coverage area to ensure sufficient signal to avoid a bad experience.
- Q:The device is online and the APP cannot receive push messages?
- A1: The mobile phone turns on “automatic management” for the “Onecam”APP and turns on all the permissions and notification functions of the APP.
- A2: If you turn off the [Allow Notification] of the APP in the [Notification and Status Bar] of Huawei/Xiaomi mobile phones,there will be no reminder in the notification bar.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>