BLOSSOM BAF60300 Sydney Collection Mirror Cabinet Installation Guide
- June 1, 2024
- blossom
Table of Contents
BLOSSOM BAF60300 Sydney Collection Mirror Cabinet
Product Specifications:
- Product Name: 12SIDE CABINET
- Required Tools: Tape Measure, Pencil, Electric Drill, Drill Bit (6mm), Silicone, Screwdriver, Screws
Product Usage Instructions
-
Step 1: Preparing for Installation
Make sure you have all the required tools mentioned above before starting the installation process. Ensure the area where you will be installing the cabinet is clean and free of obstructions. -
Step 2: Positioning the Cabinet
Use a tape measure and pencil to mark the position on the wall where you want to install the cabinet. Use a horizontal line to guide the placement. -
Step 3: Attaching the Cabinet
-
Drill holes in the marked positions on the wall using a 6mm drill bit.
-
Apply silicone to the back of the cabinet to secure it in place.
-
Use screws and a screwdriver to hang the medicine cabinet on the brackets or wall.
-
Step 4: Installing Sink
If your product includes a sink installation, follow the provided sink installation instructions carefully to complete the setup.
Frequently Asked Questions (FAQ):
-
Q: Can I install the cabinet without using silicone?
A: While silicone is recommended for added stability, you can opt to use strong adhesive tape as an alternative. However, we advise following the recommended installation steps for best results. -
Q: What should I do if I encounter difficulties during installation?
A: If you face any challenges during the installation process, please refer to the troubleshooting section in the manual or contact our customer support for assistance.
INSTALLATION MANUAL
Dimensions
12″ SIDE CABINET
REQUIRED TOOLS
INSTALLATION
DIAGRAM
REQUIRED TOOLS
DRAWER REMOVAL & INSTALLATION
