BLOSSOM 008-Paris 36 Inch Vanity Instructions
- June 9, 2024
- blossom
Table of Contents
BLOSSOM 008-Paris 36 Inch Vanity
Specification
Features
- Classic wavy design with high glossy paint.
- Soft-closing drawer.
- Compatible ceramic basins or artificial stone basins.
- Compatible matching mirror, medicine cabinet or LED mirror, medicine cabinet.
- Full extension drawers.
- Easy installation
Package Dimension
- 12 14-61/64″ x 12-61/64″ x 50-19/32″
- 24 26-3/8″ x 20-55/64″ x 20-43/64″
- 30″ 32-9/32″ x 20-55/64″ x 20-43/64″
- 36″ 38-3/16″ x 20-55/64″ x 20-43/64″
Colors/Finishes
- Glossy White – 01
Gross Weight
- 12″ 43 LBS.
- 24″ 45 LBS
- 30″ 52 LBS
- 36″ 58 LBS
Sink Top Options
| Vanities| Ceramic basin| Artificial stone basin
---|---|---|---
12 “| S8008-12| |
24 “| V8008-24| C04 2418| A10 2418 25
30″| V8008-30| C04 3018| A10 3018 25
36″| V8008-36| C04 3618| A10 3618 25
- 36″ 35-1/4 X 17-15/16” X 17-11/16 ”
- 30″ 29-5/16” X 17-15/16” X 17-11/16 ”
- 24″ 23-7/16″ X 17-15/16” X 17-11/16 ”
- 12″ 12″ X 10” X 47-15/16 ”
Hardware/Tools
Wall Preparation
- The typical dimensions shown will result in a vanity cabinet height of 32-3/4″(831mm). Depending on the sinks selected, the total height will vary from 33-1/2″(850mm) to 35-1/4(895mm). If an alternate height is desired, adjust the rough-in and backing material heights using the dimensions provided.
STEP 1
Draw a punched position on the wall with a pencil.
STEP 2
Drill the holes with suitable drill bits based on the different conditions of
the wall. Use a hammer to knock the white expansion rubber plug into the upper
hole, and knock the green rubber plug into the three lower holes, align the
hole in the wall, and lock the leveling bracket to the wall with screws.
STEP 3
Hang the cabinet. (As the picture shows.)
STEP 4
Secure the vanity onto the wall with screws.
STEP 5
Install sink top with silicone.
STEP 6
Finish.
Installation
STEP 1
- Measure the wall-hung board and mark down the holes in the wall.
- Drill the holes with suitable drill bits based on the different conditions of the wall.
- Use a hammer to knock the green expansion rubber plug into the hole.
STEP 2
Screw the 45-degree wall-hung panel onto the wall.
STEP 3
Put up the back top panel of the side vanity on the 45-degree wall-hung panel.
Finished.
Blossom Kitchen & Bath Supply Corporation
(718)-366-0088 | sales@BlossomUS.com |
www.BlossomUS.com.
For clarification, please contact us at (718)-366-0088 or sales@BlossomUS.com.
All dimensions are approximate and subject to standard tolerance. Specifications subject to change without prior notice.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>