BLOSSOM V8016 Series VALENCIA Series Vanities Installation Guide
- June 9, 2024
- blossom
Table of Contents
V8016 Series VALENCIA Series Vanities
Installation Guide
Features
- Modern design with high glossy paint or silver grey melamine finishes.
- Soft-closing doors and drawers.
- Compatible ceramic basins or artificial stone basins.
- Compatible matching mirror, medicine cabinet or LED mirror, medicine cabinet.
- Full extension drawers.
- Easy installation
Colors/Finishes
Glossy White – 01
Sliver Grey – 16
Package Dimension
20″: 22 7/16″ x 20 55/64″ x 23 13/16″
24″: 26 3/8″ x 20 55/64″x 23 13/16″
30″: 32 9/32″ x 20 55/64″ x 23 13/16″
36″: 38 3/16″ x 20 55/64″ x 23 13/16″
48″S: 50″ x 20 55/64″ x 23 13/16″
48″D: 50″ x 20 55/64″ x 23 13/16″
Gross Weight
20″: 54 LBS
24″: 62 LBS
30″: 71 LBS
36″: 84 LBS
48″S: 95 LBS
48″D: 95 LBS
Sink Top Options
| Vanities| Ceramic basin| Artificial stone basin
---|---|---|---
20″| V801 -20| С04 2018| A10 2018 25
24″| V8016-24| С04 2418| A10 2418 25
30″| V8016-30| С04 3018| A10 3018 25
36″| V8016-36| С04 3618| A10 3618 25
48″S| V8016-48S| С04 4818S| A10 4818 25S
48″D| V8016-48D| С04 4818D| A10 4818 25D
|
---|---
Hardware| Tools (not includes )
---|---
No.| | Draw| Qty|
A| White rubber plug (∅6mm)| | 2pcs
B| Screws (∅4 x 68mm)| | 2pcs
C| Leveling bracket| | 2pcs
D| Green rubber plug| | 6pcs
E| Screw| | 6pcs
F| Stainless steel cover| | 2pcs
Wall Preparation
- The typical dimensions shown will result in vanity cabinet height of 32-3/4″(831mm).Depending on the sinks selected,the total height will vary from 33-1/2″(850mm)35-1/4(895mm).If an alternate height is desired,adjust the rough-in and backing material heights using the dimensions provided.
STEP 1
Draw a punched position on the wall with a pencil.
Tip:
- The suggestion height of the cabinet is 3211/16″(830mm)-not including the basin.
- The suggestion height of the upper hole is 30-5/16″(770mm).
- The suggestion distance between the upper hole to the lower hole is 9-13/16″(250mm).
STEP 2
Drill the holes with suitable drill-bits base on different condition of the
wall.
STEP 3
Use a hammer to knock the white expansion rubber plug into the upper hole,and
knock the green rubber plug into the three lower hole ,align the hole in the
wall and lock the leveling bracket to the wall with screws.
STEP 4
Hang the accessories behind the cabinet on the leveling bracket.(As the
picture shows).
STEP 5
Secure the vanity onto the wall with screws.
STEP 6
Install sink top with silicone and finish.
For clarification, please contact us at (718)-366-0088 or
sales@BlossomUS.com
All dimensions are approximate and subject to standard tolerance.
Specifications subject to change without prior notice.
Blossom Kitchen & Bath Supply Corporation
(718)-366-0088
sales@BlossomUS.com
www.BlossomUS.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>