10369 Light Kit For Plum Blossom Instruction Manual
- September 7, 2024
- Plum Blossom
Table of Contents
10369 Light Kit For Plum Blossom
Specifications
- Product Name : Light Kit for Plum Blossom 10369
- Material: Aviation-grade wire
- Wire Tension: High
- Pressure Tolerance: High
- Maximum Voltage : 6V
Product Usage Instructions
Important Notes
To achieve the hidden-line effect, the light kit uses severely thin
aviation-grade wire with high tension and pressure tolerance. However, due to
its thin nature, be cautious not to cut through it as it may shear during
installation. Avoid pressing brick pieces down on the wire.
Maintenance
If you encounter any challenges during installation or usage, please contact support@gameofbricks.eu. The product comes with 2 years of free light kit maintenance.
Installation Steps
- Step 1 (Bag 1)
- Step 2 (Bag 2) – Repeat multiple times as instructed
- Step 3 (Bag 3)
- Step 4 – Classic Version: Connect the light kit to the battery box for installation completion.
If you opt to use a power source other than the provided battery box, ensure that the maximum voltage does not exceed 6V.
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature,be careful not to cut through it as
it might be susceptible to shearing during installation. Always be careful not
to press brick pieces down on the wire.
Thank You
For Purchasing this product. To give you the perfect hidden-line effect, we
use severely thin aviation-grade wire with high tension and pressure
tolerance. However, due to its thin nature, be careful not to cut through it
as it might be susceptible to shearing during installation. Always be careful
not to press brick pieces down on the wire.
Let’s Get Started
if you face any challenges, please feel free to reach out via support@gameofbricks.eu Please note that we offer 2 years of free light kit maintenance.
INSTALLATION INSTRUCTION
Step 1 (Bag 1)
Step 2 (Bag 2)
Step 3 (Bag 3)
The following pictures are only for Classic Version.
Step 4 – Classic Versio
Connect the light kit to the battery box and installation will be complete. If you would like to use another power source, please make sure the maximum voltage is 6V.
FAQ
- Q: What should I do if I accidentally cut through the wire during installation?
- A: If the wire is cut, please contact customer support for guidance on repair or replacement options.
- Q: Can I use a power source with a voltage higher than 6V?
- A: It is recommended to use a power source with a maximum voltage of 6V to prevent damage to the light kit components.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>